DEVELOPMENT OF PARK ALONGWITH ALLIED WORKS AT DC COMPLEX MAITRA BLOCK RAMBAN

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. AKS

Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts

Planting Hedges/Edges/Flower Beds on Soft/Hard Surface: Filling Red Hill Earth and Cow Dung Manure in the excavated area, mixing in a 2:1 proportion, watering, weeding after every watering before planting the shrub, leveling, providing and planting well-grown, healthy, bushy shrubs, including transportation and unloading, as per specified variety and sizes, planting at the desired location and specified distances, maintaining for 1 month after completion of plantation, and replacement of casualties till 1 month.

Supplying and planting of ornamental shrubs (below 1'-0" height), including pit making (60 cm × 60 cm × 60 cm), filling the pit with appropriate soil media, manure and fertilizers as per specification, and necessary maintenance for a period of one year from the date of planting, complete as specified and directed. Varieties: Allamanda / Khorika Zai / May Flower / Kamini / Kathanda / Tecoma / Acalypha / Bougainvillea / Dracaena / Togor / Nilakantha / Mussaenda / Radhachura / Krishnachura / Raat Ki Rani / Ixora / Jetuka / Thuja / Coleus Plant / Bougainvillea / Caesalpinia pulcherrima / Dracaena Mahatma / Duranta New Gold Plant/Dahlia / Chrysanthemum/ Gladiolus /rose

Edging with bricks laid dry length wise including excavation refiling consolidatingwithhandpackingand spreadingneatlysurplusearthwithinalead of 50m ,75 class designation

Supply, fixing & testing of approved make LED integral type bollard, cylindrical/square shape housing, cast aluminium dome-shaped top cover, fixed with cylindrical-shaped acrylic cover, having base plate with holes for direct mounting, complete with all accessories including preparation of foundation, fixing, connection, etc., as required. LED of 1 to 3 Watt each, assembled on single MCPCB, system lumen output with efficacy >90 lm/W. Luminaire having colour temperature up to 6500K and 50,000 burning hours life with minimum @ L70. The Colour Rendering Index (CRI) of LED light should be more than 70. Luminaire comprises driver with PF >0.95 and surge protection of 10KV. IP65 protection. Submission of LM-79-08 / IS 16106 (2012), IEC 60598, IEC 61347, including connection wire, testing, etc., complete as required. Bollard LED 8–10 Watt, cylindrical shape, height >700 mm, colour temperature 3000–6000K.

Supllying,testing,commisioning and installing use a steel internal frame wrapped in hand-sculpted fiberglass or resin to resist wind, rain, and UV fading.Integrated Lighting Low-voltage LED strings or modules run through internal wiring channels, embedded directly into the branches or canopy leaves.Weatherproof Look for IP65-rated power supplies and waterproof foliage (PE or anti-UV plastic) to withstand outdoor seasonal shifts.Stable Anchoring of Heavy-duty steel base plates or ground stakes secure the structure against strong winds in open park environmentsequal or above 10ft ht

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. ( Not exceeding 1.5 mtr in width ) and for shafts , wells, cesspits and the like not exceeding 10sqm on plan, depth upto1.5 mtr including disposal of excavated earth up to 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in AKS

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work up to plinth level 1:3:6 ( 1 cement :3coarse sand :6 graded stone aggregate 20 mm nominal size) Cr.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-in- charge