SITC of Lifts at Raja Bazar Science College and Economic campus at BT Road.

Amount

SITC of Automatic Lift after dismantling the existing old lift (as per manufacturer design & as per detailed specification below conforming to IS) and putting into operation after final testing in the existing lift shaft complete with all accessories for G+7 CAS Building Make :OTIS/ KONE/ SCHINDLER Type :- MR Lift (with Machine Room) Load: 05 -Passenger/ 340 Kg. Control: Microprocessor based with AC variable voltage & variable frequency (VVVF) Machine:- Energy efficient machine, Gearless with Machine Room Postion of Machine Room : Top Speed:- 01 Mtrs./Sec Floor Served :- 8 Landing :- 8 All on same side Travel : 26.18 Mtr. Operation : Microprocessor based implex full collective with or without attendant. Signals: Digital car position indicator , car travels direction indicator in car & at all landing with call registration indicator with braille. Leveling accuracy ± 5mm(Micro levelling arrangement)

CAR Car inside :.1200...mm(W) x …750..mm(D) Car Entrance : Clear Opening ..800. Mm (W) x 2000..mm(H) protected with car door for Accessible India Car Enclosure : Stainless Steel Sheet(20 SWG) with Hairline finish with hand rail Car Ceiling & Lighting : Stainless Steel with hairline finish with LED lighting and Fan Car Ventilation: Pressure fan with anodised aluminium grill. Car Flooring : Decorative granite flooring (As per direction of EIC and according to this Department's Order). Car Door: Stainless Steel Centre/ Side opening automatic door provided with V3F controlled door drive system. Landing Door : Stainless steel centre opening automatic door provided with V3F controld door drive system. Door Opening : Automatic power operated door with full length Photocell assembly light curtain sensor.

PROTECTIVE DEVICES & OTHER ACESSORIES ARD: Automatic rescue device complete with dry maintenance free batteries as required for automatic evacuation to the nearest floor in case of Power failure/Single phasing/others. Overload Protection : Full loaded with overload protection. On overloading the lift care will not start with door remaining open and give audio display indication. Emergency lighting in car: Battery operated emergency lighting in the lift car. Intercom system: Battery Operated intercom system in lift car, Machine Room & Control Room. Emergency Alarm: Battery operated alarm bell system in lift car and control room. Fireman switch: Fireman switch at main landing terminal. Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. Main rope - As per manufacturer's standard conforming to IS. Other Features :Call Registration LEDs.,OSG Electronic Switch.,Fire man drive.,Hand rail in rear side only.,1 hour fire rating at landing door.,Mechanical Manual Rescue Break Lever.,24*7 Cloud base monitoring system.,Mechanical Lock arrangement for car door.

DIMENSION OF SHAFT & POWER SUPPLY Shaft Dimension : Available shaft Dimension 1750mm x 1280 mm Pit Depth :1600 mm Overhead : 4800 mm Electric power supply : (i) Main Supply :AC 415 Volt 3 Phase, 50 Hz, terminated in machine room as per IS. (ii) Auxiliary Supply: Single-phase 220 V, 50H z. Note:1.Rate considering buyback of old dismantled parts and accessories of existing lift inclusive of clearing the site. 2. Rate considering Minor civil works, wall / floor cutting, for making holes, chiseling etc. and mending good the damages to the original finish.

SITC of Automatic Lift (as per manufacturer design & as per detailed specification below conforming to IS) and putting into operation after final testing in the existing lift shaft complete with all accessories for G+2 Economics Department: Make :OTIS/ KONE/ SCHINDLER Type :- MRL Lift . Load: 15 -Passenger/ 1020 Kg. Control: Microprocessor based with AC variable voltage & variable frequency (VVVF) Machine:- Energy efficient machine, Gearless without Machine Room Postion of Machine Room : Directly above the lift shaft. Speed:- 01 Mtrs./Sec Floor Served :- 3 Landing :- 3 All on same side Travel : 8.60 Mtr. Operation : Microprocessor based implex full collective with or without attendant. Signals: Digital car position indicator , car travels direction indicator in car & at all landing with call registration indicator with braille Leveling accuracy ± 5mm(Micro levelling arrangement)

CAR Car inside :.1600...mm(W) x …1500..mm(D) Car Entrance : Clear Opening ..900. Mm (W) x 2000..mm(H) protected with car door for Accessible India Car Enclosure : Stainless Steel Sheet(20 SWG) with Hairline finish with hand rail Car Ceiling & Lighting : Stainless Steel with hairline finish with LED lighting and Fan Car Ventilation: Pressure fan with anodised aluminium grill. Car Flooring : Decorative granite flooring (As per direction of EIC and according to this Department's Order). Car Door: Stainless Steel Centre/ Side opening automatic door provided with V3F controlled door drive system. Landing Door : Stainless steel centre opening automatic door provided with V3F controld door drive. Door Opening : Automatic power operated door with full length Photocell assembly light curtain sensor.

PROTECTIVE DEVICES & OTHER ACESSORIES ARD: Automatic rescue device complete with dry maintenance free batteries as required for automatic evacuation to the nearest floor in case of Power failure/Single phasing/others. Overload Protection : Full loaded with overload protection. On overloading the lift care will not start with door remaining open and give audio display indication. Emergency lighting in car: Battery operated emergency lighting in the lift car. Intercom system: Battery Operated intercom system in lift car, Machine Room & Control Room. Emergency Alarm: Battery operated alarm bell system in lift car and control room. Fireman switch: Fireman switch at main landing terminal. Voice Synthesizer: Voice announcement system (Voice Synthesizer) in the car to announce the position of the elevator in the hoist way as the car passes or stops at a floor served by the elevator. Main rope - As per manufacturer's standard conforming to IS. Other Features :Call Registration LEDs.,OSG Electronic Switch.,Fire man drive.,Hand rail in rear side only.,1 hour fire rating at landing door.,Mechanical Manual Rescue Break Lever.,24*7 Cloud base monitoring system.,Mechanical Lock arrangement for car door.

DIMENSION OF SHAFT & POWER SUPPLY Shaft Dimension : Available shaft Dimension 2160mm x 2200 mm Pit Depth :1600 mm Overhead : 4800 mm Electric power supply : (i) Main Supply :AC 415 Volt 3 Phase, 50 Hz, terminated in machine room as per IS. (ii) Auxiliary Supply: Single-phase 220 V, 50H z. Note:1. Rate considering Minor civil works, wall / floor cutting, for making holes, chiseling etc. and mending good the damages to the original finish.

KONE ELEVATOR INDIA PRIVATE LIMITED