SPECIAL REPAIR TO MT AND MTR AND S OF HQ MC AT VAYUSENA NAGAR NAGPUR

Amount

B/R Items

Demolition of Brickwork or stone /boulder masonry built in cement mortar complete all as specified and directed.

Taking down cement plaster on brick or stone wall,concrete, etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but n.exc 4sq.m all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame) area n. exc 1.5 sqm all as specified and directed.

Taking down of shutters of any description of area not exceeding 1 sqm each all as specified and as directed.

Taking down of shutters of any description of area exceeding 1 sqm each but not exceeding 2 sqm each all as specified and as directed.

Supply & fix pressed steel frames for door chowkat of size 105x60mm with MS Butt hinges , 100mm size (3 Nos each chowkhat) with one or more rebates including necessary fixing lugs, lock strike plate, etc all as specified and as directed.

Supply & fix pressed steel frames for chowkat of size 165x60mm with MS Butt hinges , 100mm size (3 Nos each chowkhat) with one or more rebates including necessary fixing lugs, lock strike plate, etc all as specified and as directed.

Material & labour for PCC (1:3:6) type C-1 using 20 mm graded stone aggregate as in filling of pressed steel door frame complete all as specified and as directed.

Supply & fix 30mm thick 2nd class hard wood Skeleton door shutters complete all as specified and directed.

Supply & fix 30mm thick flush door shutter solid core construction with block board case and plywood face panels, commercial type on both sides all as approved by GE complete all as specified and directed.

Supply & fix Stainless steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.40mm and fixed in wooden/steel/Aluminium windows or fixed with Stainless steel wire staples all as specified and as directed.

Hacking out old broken glasses any thickness, size, quality or description from wooden frames glazed with putty or fixed with bead all as specified and as directed.

All as per item No 13.00 above but from metal frame including punching out or drilling out old glazing pins/spring clips and providing and fixing new all as specified and as directed.

Supply & fix sheet glass 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane all as specified and as directed.

Supply & fix sheet glass obscured or frosted on one side 3mm thick quality with oil putty or beads fixed with screws in sequence not exceeding 0.5 sqm in each pane all as specified and as directed.

Dismatling of cupboard partition of any description fixed in any position with nail all as specified and as directed

Supply & fix ply wood grade BWR type BB, 18/19mm thick, ISI marked fixed with screws to timber frame work complete all as specified and as directed.

Material & labour Brickwork with sub class 'B' Bricks , straight or curved in plan exc 6 m mean radius built in CM(1:6) complete all as specified and directed.

Material & labour for rendering 15mm thick on other than fair finish of bricks/concrete/stone surface of wall in CM (1:4) mixed with WPC and finished the surface even and smooth without using extra cement complete all as specified and directed. Note : Water proofing compound will be measured and paid separately.

Material & labour for Rendering 10mm thick in CM (1:6) in brick surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.

Material & labour for Rendering 10 mm thick on Ceiling in CM (1:3) finished the surface even and smooth without using extra cement. complete all as specified and directed.

Supply only integral water proofing compound ISI Marked complete all as specified and directed.

Supply & fix Aluminium powder coated Framed doors with shutters glazed including necessary joining cleats, 03 nos Aluminium Hinges(100mm) in each shutter and glazing clips, rubber neoprene packing, anodised aluminum snap beading screws etc. coated aluminium sections of approved make confirming to IS complete all as specified and directed. Note : Glazing and pre laminated particle board shall be measured and paid seperately.

Supply & fix Aluminium powder coated Louvered type ventilator weighing 0.55 kg/mtr with all fittings closing and opening type, aluminium sections of approved make confirming to IS complete all as specified and directed. Note : Glazing shall be measured and paid seperately.

Supply & fix Aluminium powder coated Framed windows of pattern approved by GE (fixed, sliding,hung Two Track/Three Track) make necessary joining cleats, in each shutters and glazing clips, ruber neoprene packing, anodised aluminum snap beading screws etc aluminium sections of approved make confirming to IS complete all as specified and directed . Note : Glazing and stainless steel/PVC wiremesh shall be measured and paid seperately.

Material & labour for 3 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations as per site requirement fixed IN Aluminium frame work as in door/fixed frame work all as specified and directed.

Supply & fix in repairs door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed all as specified and directed.

Material & labour for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed.

Supply & fix 4 levers Brass Mortice lock 100 mm size for Aluminium Door all as specified and directed.

Supply & fix 12 mm thick toughened glass door/ partition of approved colour, design & logo (if required any type) side opening type or sliding type with complete fittings including pivot hinge/floor spring , handle fancy type (for VIP office doors), locking device with duplicate key, Spenders partition fixing rods/cleats & other fittings if required etc & connecting jobs like tile cutting, demolition PCC, plastering & painting etc not exc. 1.50 Sqm and making site good disturbed surface all as specified and directed. Note- All the fittings shall be approved by GE/ Engr-in-charge before commencement of work.

Supply & fix solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with mild steel tube & fixed in position as per manufacturer's instruction & fixing to wall with anchor bolt or screw with nemani wall plug (size 12 to15 cm long ) all as specified, and shown on drawing on page No 178 of SSR Part-II 2020 as directed.

Supply & fix 30mm thick (styles) factory made solid panel PVC door shutters consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width tuck inside with solvent cement for styles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame all as shown on drawing on page 176 of SSR Part-II 2020 as specified & as directed.

All as per item no. 34.00 herein before but partly glazed i.e. upper panel will be glass pane or wiremesh fitted externally in the clear space & lower panel will be plain colour PVC sheet complete all as specified and directed.

Supply & fix butt hinge, medium weight ,cold rolled mild steel 100mm long all as specified and as directed.

Supply & fix Aluminium anodised barrel tower bolt of extruded section 150 mm long and fixed all as specified and as directed.

Supply & fix in repairs aluminium anodised barrel tower bolt of extruded section 200 mm long and fixed all as specified and as directed.

Supply & fix mild steel pressed handles, 150 mm oval type, stove enameled black all as specified and as directed.

Supply & fix aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extruded sections or cast aluminium alloy 300 mm long and fixed all as specified and as directed.

Supply & fix Floor door stopper of aluminium alloy body double and tongue anodised with rubber shoe and fixed of size 150 mm all as specified and as directed.

Supply & fix hasp and staple, safety type aluminium anodised with hinge pin including bolt to hinge plate and fixed with screw, 125 mm long all as specified and as directed.

Supply & fix 300 mm long, mild steel ordinary rat rail springs including roller and roller plate complete all as specified and as directed.

Material & labour for welding in repairs to broken hinges of doors and windows to metal frame all as specified and as directed.

Supply & fixed in repairs mild steel handle to existing steel windows left or right (as per existing pattern) all as specified and as directed.

Supply & fix in repairs mild steel peg stay for windows/ ventilators all as specified and as directed.

Supply & fix steel windows or ventilators, any type fixed or side/centre hung type with glazing bars including taking down old one all as specified and as directed. Note : Glazing and wiremesh,iron grill will measure and paid seperately.

Material & labour for framed work such as grills,gratings,etc with ends of bar shouldered and or riveted or forged into spikes framed guarded bars barred iron doors ladders framed balusters walkways railings framed work of water tank stand similar work confirming-290 Gde-E-165 complete all as specified and directed.

All as per item No-48 here in before but fabrication and fixing only complete all as specified and directed.

Material & labour for applying 2 coats of Synthetic Enamel paint over a coat of Red Oxide zinc chrome primer on steel surface over 10 cm girth including preparation of surface complete all as specified and as directed.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness including floor finishes and disposal of debirs all as specied and directed.

Material & labour for PCC (1:2:4) Type B-1(20mm graded stone aggregate) 25 mm thick as in sub base to kota stone floor all as specified and directed.

Material & labour for 20-25mm thick Kota stone flooring over and including 20mm screed bed in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and Mirror polishing all as specified and directed.

All as per item No 53.00 herein above but as in skirting on vertical surfaces of wall with backing coat bed 10mm thick in CM (1:4) for kota stone all as specified and directed.

Material & labour for Rubbing/Grinding and mirror polishing the existing kota stone flooring including filling / pointing the joint with cement slurry mixed with pigment to match the surface complete all as specified and directed.

Dismantling of floor, hearth or wall tiling, Granite platform/ kota stone flooring including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Material & labour for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of cement mortar(1:6) 15 mm thick for laying floor tiles complete all as specified and as directed.

Material & labour for Glazed ceramic coloured tiles in vertical surface as in skirting and dado 350x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including rendering 10 mm thick in CM 1:4 on fair faces of brick or concrete surfaces of wall complete all as specified and as directed.

Material & labour for Non - skid joint free Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floorsetc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of cement mortar(1:6) 15 mm thick for laying floor tiles complete all as specified and as directed.

Material & labour for machine cut cudappah stone slab 20-25mm thick laid over and including cement screed base of 20 mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material & labour for rounding to edges of stone slabs on edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and including connections complete all as specified and as directed.

Taking up or down steel tubing 20 mm bore and including connections complete all as specified and as directed.

Supply & fix GI Tubes, ‘medium grade’, galvanised, 15 mm dia bore Concealed with all fitting including cutting of brick/Stone , Concrete Block wall or fixed to ceiling and making good complete as specified and directed

Supply & fix GI Tubes, ‘medium grade’, galvanised 20 mm dia bore Concealed with all fittings ncluding cutting of brick/Stone , Concrete Block walls or fixed to ceiling and making good complete as specified and directed

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI bassed corrugated steel sheet 0.50 mm thick of any colour having tensile strenth of 550Map as in roof covering/cladding to wall,fixed with self tapping screw all as specified and directed.

Supply & fix Pre-painted GalvaIume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge of roof covering fixed with self tapping screws etc complete all as specified and directed.

Dismantling of wall and celling board (fiber, pulp, insulation, etc) or insulation board / blankets, any thickness, including cover fillets all as specified and directed.

Material & labour for Providing Gypboard (conforming to IS-2095-1982) manufactured by M/s India Gypsum false ceiling using GI perimeter channel of size 20mm (one flange) x 27mm (web) x 30mm (other flange) x 0.55mm thick along perimeter of ceiling fixed in wall using nylon sleeves and screws suspended from soffit with GI intermediate channels (of size 15mmx45mmx15mmx0.9mm thick) @ 1220mm centre to centre with ceiling angle (of size 25mmx10mmx0.55mm thick) fixed to soffit with GI cleat and steel expansion fasteners which alternate fixed to ceiling section of 0.55mm thick having Knurled web of 51.5mm and two flanges of 26mm each with lips of 10.5mm) using connecting clip and in direction perpendicular to intermediate channel @ 300 mm centre to centre and Gypboard fixed to ceiling section using 25mm drywall screws @ 230mm centre to centre complete all as per manufacturer’s instructions including 2 coats of OBD over a coat of 1mm thick putty complete all as specified and directed.

Supply & fix Harrison curtain rails, 19/20mm dia, fancy type powder coated aluminium alloy with fixing brackets, stops, rollers etc including taking down old one all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Material & labour for Hardcore of gauge n.exc 63mm deposited , spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Material & labour for 75mm thick plain cement concrete type D-2 (1:4:8) using 40 mm graded stone aggregate as in sub-base to floor finishes complete all as specified and directed.

Material & labour for factory made rubber moulded precast chequred cement concrete tiles 250 mm x 250 x 25 mm thick over and including 15 mm screed bed in CM 1:6 set as jointed and pointed in neat cement slurry with grey cement and coloured pigment to match the shade of tile & approved by GE all as specified and directed.

Supply & fix factory made , rubber molded, white cement based, pigmented block lacquer coating & curved through drying process mechanically vibrated and compacted pre cast premium paver blocks in M 30 grade, 60 mm thickness, size/design and colour(Colour-Red, Saffron, Dholpur, Olive green, Dove grey, Black, Brown, Yellow and any colour) as approved by GE with providing and laying in position over bed of sand or stone dust (50 mm thickness) in line and level etc,complete all as manufacturer instruction all as specified and as directed.

Material & labour for complete removal of existing treatment from ceiling surface and applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as specified and directed

Material & labour for complete removal of existing treatment from plastered wall surfaces and applying two coats of distemper oil emulsion over 3mm thick wall care putty complete all as specified and directed

Material & labour for Pcomplete removal of existing treatment from external plastered wall surfacesand applying two coats of cement base paint complete all as specified and directed

Material & labour for Preparation of Newly plastered wall surfaces and applying two coats of distemper oil emulsion over 1.5 mm thick wall care putty over a coat of cement primer complete all as specified and directed

Material & labour for Preparation of Newly plastered external wall surfaces and applying two coats of cement base paint over a coat of primer complete all as specified and directed

Material & labour for Preparation of Newly plastered ceiling surfaces and applying two coats of distemper oil emulsion over 1.5mm thick wall care putty over a coat of cement primer complete all as specified and directed

Material & labour for Preparation of old painted steel surfaces area over 10 cm width or firth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material & labour for Preperation of New steel surfaces area over 10 cm width or girth and applying two coats of synthetic enamel p aint over a coat of red oxide primer complete all as specified and as directed.

Material & labour for Preparation of old plastered Wall surfaces and applying three coats of white wash complete all as specified and directed

Material & labour for Preparation of old plastered Ceiling surfaces and applying two coats of white wash complete all as specified and directed

Taking down carefully existing bitumen tar felt including plaster concrete/brick coba/tiling from the roof/parapets to depth upto RCC slab, and roughening the surface, wire brushing, cleaning and washing with water etc, removing the rubbish to a distance exceeding 500m but n.exc 1Km & depositing where directed .

All as per item No-87.00 herein above but on vertical surfaces like parapets except brick/ cobra tiling etc all as specified and directed.

Material & labour for rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces including and mixed with water proofing compound @ 3% by weight of cement completely complete all as specified and as directed.

Material and labour for roof treatment on RCC roof slab complete as mentioned below, all as specified and as directed:- (i) Cleaning the concrete surfaces of RCC roof slab as obtained after demolition of cement tiles,/taking down of existing water proofing treatment thoroughly with wire brushes, washed and dried. (ii) Checking the roof slab by flooding test with water till total elimination of leakage/seepage/ dampness all as specified in SSR Part-I (after ascertaining location of leakage/seepage/ dampness, carrying out treatment vide relevant item i.e item No 92.00 hereinafter of pressure grouting shall be operated at the required locations). (iii) Brushing surface with neat cement slurry at the rate of 3.00kg of cement per Sqm. (iv) Cleaning the plastered roof surfaces and applying a coat of bitumen primer @ 0.3 kg/sqm on top of dry surface. (v) Laying APP modified polymeric membrane 3mm thick with non woven polyester core laid and bonded to the sub-strata and over-laps shall be sealed/fused by flame "torch', application method all as per manufacturer's instructions. (vi)APP modified polymeric membrane shall be covered with bitumenous based aluminium paint @0.2 kg/sqm in two coats complete all as specified and as directed.

Material & labour for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in filleting and benching slightly rounded off etc. Including necessary form work, if any, complete all as specified and as directed.

Material and labour for grouting in roof through PVC nipples at a spacing of 45cm to 60cm Centre to centre including drilling injection points to a depth of 75-100mm, providing 10mm dia PVC nipples and pressure grouting using with and including cement mixed with plasticizing admixture like FOSROC (model CEBEX100) or PIDILITE (model 207 PIDICRET 8AM) @ 225gms/50kg of cement to fill up all capillaries/ voids/ honeycombing areas inside concrete with pressure of 2 to 4 Kg/Sqcm and continued till refusal. After grouting, nozzles to be sealed with the sealing compound/mortar etc, all as per manufacturers instructions and as directed. Note:- After ascertaining the location of leakage/ seepage/dampness under item No.90 here-in-before, this item shall be operated at the required location.

Material & labour for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate to fill undulations over RCC roof slab to achieve uniform slope complete all as specified and as directed.

Material & labour for 75mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in Plinth protection / Path finished the surface even & smooth without using extra cement complete all as specified and directed.

Dismantling water tanks exceeding 500 litres and not exceeding 1000 liters capacity complete all as specified and as directed.

Supply & fix in repair Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Excavation in trenches n.exc. 1.50 m deep and n.exc. 1.50 m wide and getting out in soft / loose soil for drain pipes, manholes etc and not exceeding 10 Sqm on plan complete all as specified and as directed.

Material & labour for P.C.C ( 1:4:8), type D-2 using mm graded stone aggregate as in concrete bed to drain pipes including packing under and haunching against the sides of the pipes after laying & testing for 150mm bore of pipes complete all as specified and as directed.

Supply & fix 150 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints laid in trenches or in floors complete all as directed.

Supply & fix PVC (SWR) pipes, 110 mm bore, single socketed, in any length, with rubber ring joints, fixed to wall all as specified and directed.

Supply & fix in repair 150mm bore PVC (SWR) bends of any radius complete all as specified and directed

Supply & fix PVC (SWR) bends, 75 mm bore all as specified and directed.

Supply & fixed in repairs CP bottle trap, 32 mm dia fancy type as approved by engr-in-charge, complete all as specified and directed. Make - Jaguar/ ParryWare/ Johnson

Supply & fixed in repairs grating,150 mm dia, with waste hole, of PTMT (minimum weight 40 gms) all as specified and directed.

Material & labour for PVC (SWR) floor trap with grating, 75 mm bore, including jointing to waste pipe with solvent cement including taking down of existing old trap all as specified and directed.

Supply & laid in trenches PVC, 32 mm dia High density polyethylene Pipes (HDPE) of pressure rating 6 kgf/cm2 complete all as specified and as directed.

Material & labour for PVC (SWR) nahani trap with grating,125/110 mm bore, including jointing to waste pipe with solvent cement including taking down of existing old trap all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soils complete all as specified and directed.

Material & labour for Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed complete all as specified and directed.

Material & labour for plain Cement concrete (1:2:4) type -B1 using 20mm graded stone aggregate, 40mm thick as in floor, surface of floor fair finished with using extra cement complete all as specified and directed.

Material & labour for PCC 1:2:4 type B2 using 40 mm graded stone aggregate 100 mm thick as in Hardstand, surface finished even and smooth without using extra cement all as specified and directed.

Material & labour Providing precast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in drain covers set in cement motar 1:6 including necessary formwork and moulds complete all as specified and directed. Note : Reinforcement bars shall be measured and paid seperately under relevant items of this schedule.

Dismantling structural steel work including doors, gates but excluding framed truss etc.completed all as specified and directed.

Supply & fix Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc complete all as specified and directed.

Fabrication and Fixing only roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc completed all as specified and directed. Note : Old steel obtained from dismantling shall be re-used in this item.

Material & labour for TMT bars 10mm dia and over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

All as per item No.116.00 here-in-before but 5mm dia and over upto and including 10mm dia in stirrups spacers and binders complete all as specified and directed.

Excavation in post holes ( or similar holes) getting out in any type of soil, each n.exc 0.5 cum, returning, filling in and ramming earth or broken rubble mixed with eath around, in layers n.exc 25cm , watering, and removing surplus soil to a distance n.exc 50m and making good surface complete all as specified and directed.

Material & labour for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for embedding post complete all as specified and directed.

Material & labour for mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weldedtubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

Supply & fix mild steel screw bolts(Machine made) with hexagonal or square head at one end and screwed the other end n exc 5 cm long and diametre of neck exc 5 mm but n exc 10 mm dia all as specified and directed.

Material & labour for mild steel plates (Plain or chequred) channel square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W Gde-E 250 quality 'A' complete all as specified and directed.

Material & labour for Reinforced Concrete Cement 1:2:4 Type B1 Nominal mix using 20 mm graded stone aggregate as in Slabs supported on walls, and in shelves complete all as specified and as directed.

Material & labour for Reinforced Concrete Cement 1:2:4 Type B1 Nominal mix using 20 mm graded stone aggregate as in Chajjas complete all as specified and as directed.

Material & labour for Reinforced Concrete Cement 1:2:4 Type B1 Nominal mix 20 mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m spancomplete all as specified and as directed. Note for SP item No 123 to 125 : Reinforcement have bore shall be measured and paid seperately under relevant item of this schedule.

Material & labour for Cement concrete 1:3:6 TypeC-2, using 40mm graded stone aggregate as in surface channel and drain complete all as specified and as directed.

Material & labour for cement concrete 1:2:4, type B1, using 20mm graded stone aggregate for coping, water troughs and the like including weathering slightly rounded or chamfered angles and throating etc complete all as specified and directed.

Material & labour for finishing cement concrete drain surface even and smooth using extra cement complete all as specified and directed.

Material & labour for forming contraction(Dummy joints) 65 mm deep x 10mm wide filled with sealing compound grade A' complete all as specified and directed

Supply & fix glass dividing strips 38mm wide and 3mm thick inserted in position conforming to design complete all as specified and directed.

Material & labour for preparation of surfaces thoroughly by cleaning, washing and removing dust, dirt, oil and loose particles and applying water proofing liquid Dr. Fixit Pidicrete URP in two coats as per manufacture instruction mixed with cement complete all as specified and as directed.

Demolition of cement concrete (reinforced) any description and in any position not otherwise specifically provided for all as specified and as directed by EIC

Use and removal of formwork to chullah hoods, chajjas,troughs and similar items including edges complete all as specified and directed

Use and removal of Formwork to edges of concrete slabs n.exc 20 cm wide with rough finished flat surface of concrete complete all as specified and directed.

Supply & fixed in repair Bib tap 15mm bore fancy type, foam flow chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified and as directed. Make : Prayag or equivalent in Leader/ Zoloto

Supply & fixed in repairs fancy Angle cock 15mm bore fancy type chromium plated (concealed type) all as specified and as directed. Make : Prayag or equivalent in Leader/ Zoloto

Supply and fixed in repairs chromium Plated Basin mixture complete all as specified and as directed. Make : Jaquar or equivalent in Leader/ Zoloto

Supply & fix in repairs Pillar tap brass CP fancy type, foam flow, 15mm with capston heads , screwed down high pressure for wash hand basin all as specified and as directed. Make : Jaquar or equivalent Leader/ Zoloto

S/F in repairs PVC mirror cabinet of size 350 x 450 mm, complete all as specified and directed

Supply & fix Glazed Corner shelf with brass CP railling complete all as specified and directed Make Paryware or equivalent in Jaquar/Jhonson/Parryware/Prayag

Supply & fix Glass Self 22" with Brass Chromium plated railling complete all as specified and directed Make :- Jaquar or equivalent in Jhonson / Parryware/Prayag.

Supply & fix in repair 10 litres capacity PVC valveless, syphonic action type, slim body fancy flushing cistern, low level, white, with inlet valve, float valve and handle complete all as specified and as directed.

Supply & fix in repair vitreous china squatting pan orissa pattern, long pan, size 580 X 440 mm with 'P' or 'S' trap, front or back inlet and foot rests, making good to floor all as specified and as directed.

Supply & fix in repair vitreous china wash down water closet, pedastal pattern (EWC) white with 'P' or 'S' trap, fixing bolts and PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete making good to floor all as specified and as directed.

Supply & fix in repair PVC water closet seat and cover, black or white, closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device all as specified and as directed.

Supply & fix in repair Vitreous China wash hand basin, white, flat back of size 550 x 400 mm including CI brackets, waste coupling , brass CP pillar tap 15mm screwed down high pressure , PTMT bottle trap, PVC supply pipe 15mm from stop valve etc complete all as specified & as directed

Supply & fix 32 mm dia low density polythelene (LDPE) pipe of pressure raing 4 kgf/cm2 fixed completely to wall/floor for wash hand basin all as specified and as directed.

Supply & fix brass chromium plated hand shower (Health faucet) with 1 meter long easy flexible tube in chrome finish and wall hook with NRV (back flow preventer ) complete all as specified and as directed. Make : Jaguar/ Prayag/ Parryware

Supply and fixed in repairs 15mm dia 2 way Bib cock cast copper alloy with crutch or butterfly handles screwed down screwed for iron pipe as specified & directed Make: Jaquar /Prayag/ zoloto

Supply & fix bib tap 15mm dia standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed

Supply & fix sink made of stainless steel sheet of 1.0 mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including supply & fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Supply & fix Vitreous China Urinal, Half stall type,white (excluding flushing cistern, flush pipe and waste pipe)complete all as specified and directed.

Material & labour for Mild Steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to prepared for hanging or sliding with and including either hooks and hinges or steel hanging doors fittings and hanging, also fastening and fixing complete all as specified and as directed.

Material & labour for Plain black mild steel sheeting 1.25mm thick in steel gate and straight flashing complete all as specified and as directed.

Supply & fix Soap dish (CP Brass) complete all as specified and directed

Supply & fix stainless steel Towel Rod 600 mm long between flanges fixed with brass screws complete all as specified and directed

Supply & fix 5mm thick SDG frameless looking mirror of size for bathrooms, silver colour complete all as specified and directed make:Saint Gobain/Modi Guard / Kohinoor

E/M Items

Taking down DB/main switch of any size and making good disturbed surface of wall/floor after repairs complete all as specified.

Taking down carefully sub-main wiring of any description and making good disturbed surfaces to match the existing all as specified and as directed by EIC.

Material & labour for sub main wiring (concealed) complete with two single core 6 Sqmm FR PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade and conduit accessories including 6 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Note: 3 run of 6 sqmm & one run of PVC conduit shall be measured as single unit

Material & labour for sub main wiring (concealed/surface) complete with two single core 4 Sqmm FR PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit heavy grade ISI marked and conduit accessories including 4 Sqmm FR PVC insulated unsheated stranded copper earth cable connected to common earth dolly and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Note: 3 run of 4 sqmm&one run of PVC conduit shall be measured as single unit

Taking down carefully point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, to match the existing etc. complete all as specified and as directed.

Material & labour for point wiring (concealed) on walls and surface of ceiling complete with FR PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable modular boxes ,switch plates of approved make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light/fan point controlled by one switch

All as per Ser item No 164 above but for One switch socket outlet modular type 3 pin 6 amp on same board.

All as per item No 164above but for one 3 pin socket outlet, 6 amps on Independent board.

All as per item No 164 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.

Supply & Fix new master led tube 4ft 20 W LED batten of high-quality materials and design, Extruded aluminum housing enhances safety, High quality PC Diffuser. Reliable and robust housing structure having nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W including driver complete all as specified and as directed. Make : CG Cat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent in Bajaj/Wipro.

Supply & Fix new Surface mounting LED Luminaries 2ft and 10 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm complete all as specified and as directed . Make : CG Cat Part No. LCTL-10-CDL or equivalent in Bajaj/Wipro.

Supply & fix 4 step, one module, modular type electronic fan regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675531 or equivalent in

Supply & fix Switch modular type, single pole one way 6 Amps, 250 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in Anchor/ Leader

Supply & fix socket modular type 6 Amps 3 pin 2 module 250 volts all as specified and as directed. Make : Legrand Cat No. 675551 or equivalent in Seimens/ L & T

Supply & fix socket modular type 6/16 Amps, 3 pin combine, 2 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in Seimens/ L & T

Supply & fix switch modular type 16 Amps,one way with indicator, 1 module,240 volts all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in Seimens/ L & T

Taking down old unserviceable power unit of AC/geyser of any type and Supply & Fix power unit for upto 2 ton AC and geyser up to 3.5 KW modular type, 4 module,240 volts all as specified and as directed Make : Legrand Cat No. 675558 or equivalent in Seimens/ L & T

Supply & fix for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed. Make : Leader/ Anchor/ Haavells

Supply & Fix sheet metal enclosures for DB's for incorporating MCBs, TPN, 4 way, IP-43 with metal double door, 415 volts, as per IS-8623 complete all as specified and as directed. Make : Legrand Cat No 507670 or equivalent in L & T/Seimens.

Supply & Fix MCB TPN, 63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc complete all as specified and as directed. Make : Legrand Cat No. 408683 or equivalent L & T/ Seimens.

Supply & Fix sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs, IP-43, 8 way with 200 amps rated busbar, 240 volts, as per IS-8623 all as specified and as directed. Make : Legrand Cat No 507611 or equivalent in L & T /Seimens.

Supply & Fix MCB SPN, 32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. all as specified and as directed. Make : Legrand Cat No. 408617 or equivalent in L & T/ Seimens.

Supply & fix MCB SP 10-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. all as specified and as directed. Make : Legrand or equivalent in L & T/Seimens

Rajveer Infrastucture

Asha Enterprises