Misc. Capital Works. Subhead Provision of wall mounted unit for hygiene and odor control in NITB at S. V. Airport, Raipur.

Air Purification System - Hygiene & Odor control unit - Wall Mounted: Supply, Transportation, installation, testing & commissioning of Hygiene & Odor Control Unit - The system shall be Wall mounted with in built with nanoX technology with a coating of five metals comprising nano TiO2, gold, copper, platinum & silicon along with EPA approved antimicrobial coating having antimicrobial coating targeted on aluminium matrix cell duly enclosed by a poly quartz casing tube with the capability to produce ionized Hydroxyl oxidizers with in-built plasmOX to generate ion generator pins. The outer body of unit should be powder coated (PU) with ultrafine finish & the thickness of PU coating will not less than 100 μm (OEM to verify on letterhead). The Advanced Oxidation Plasma Technology (AOP) Cell Air Purifier shall be capable of removing TVOC, Formaldehyde, Sulphur di oxide, nitrogen di oxide, ammonia, Escherichia coli (E. coli), Total plate count, Yeast & Mold. using the nanoX and plasmOX technology that is without the use of any filters. The filter-based technology/ system is not acceptable. The power/control cabling including aesthetic look conduiting if required between the unit and the power source / controls shall be included in the cost and the unit be to installed on wall. The technology i.e. nanoX and plasmOX shall be certified by Indian/ Foreign Lab for the following parameters: TVOC, Formaldehyde, Sulphur di oxide, nitrogen di oxide, ammonia, Escherichia coli (E. coli), Total plate count, Yeast & Mold along with efficacy report & test report for the same is need to be provided. The GreenPro, CE, FDA certifications required. The technology shall be tested by ICMR/ IIT for cell toxicity stating that there is no change in the structure and prove that it is absolutely safe for humans. The product supplied must be 'Made in India'. The technology should not produce ozone. The unit should be complete with control cabling and Plug Top & necessary power cable. Vendor to comply all Tender Specifications and certifications. Indoor air quality test at 3 washrooms decided by E-I-C for TVOC, Formaldehyde, Sulphur di oxide, nitrogen di oxide, ammonia, Escherichia coli (E. coli), Total plate count, Yeast & Mold before and after installation of the units and both the test reports from NABL accredited lab shall be submitted to AAI and guaranteed parameter mentioned above shall be fulfilled complete as required and as directed by E-I-C.

Power Consumption not more than 65 Watts

Power Consumption not more than 36 Watts

Air Purification System - smokeNOX air purification unit for smoking room: Supply, Transportation, installation, testing & commissioning of smokeNOX Air Purification Unit for smoking room for removing Smoke & Dust particles & smoke odour - Air Purification unit having Double Skin (0.6mm thick Pre-Coated GI sheet Outer skin & 0.6mm thk GI sheet metal cabinet type plain Inner skin, 40 kg/cum polyurethane foam sandwiched ) horizontal Plenum for Ceiling suspended/Single Skin 14G Leak Proof Powder Coated GI Sheet for Floor mounted as instructed by E-I-C. Filter section having Stage 1: 25 mm thick EU-4 Pre filter. Stage 2: 50 mm thick Self Charge filter for which shall comprise of 5 layers of filtration as following. Layer 1 : of a black honeycomb woven polypropylene. Layer 2 : white honeycomb woven polypropylene. Layer 3 : polyether 45ppi foam. Layer 4 : same as layer 1 and Layer 5 : same as layer 2. The media shall consist of material which have high electrostatic potential. Airflow across the filter will cause the layer of self-charge with an higher electrostatic charge to enhance filtration capabilities. The media retainer shall consist of ½” back powder painted 20 gauge welded wire on both the up stream and down side of the filter. The IPD of filter shall not exceed 5 mm. Stage 3: 50 MM thick ultraSORB Grid Matrix Filter with Chemisorptive Properties based on dry scrubbing Absorbent media with Grid Matrix blocks that are aligned and encased in the recycled frame and screen to be installed easily into the air purification cabinet to provide the Superior performance of adsorbent media on the air intake side. The Grid matrix blocks have a monolithic structure comprising chemical adsorbent media. The filter must have turbulent flow/tornado for the less pressure drop and to conserve the Electrical Energy and the filtration surface completely useable. The size and shape of the monolithic structure of the cells leads to turbulent flow and superior performance. The Filter shall be capable of removing gases like SOx, NOx, H2S, HCHO, NH3 etc. The filter also has no bypass and a very low pressure drop which amount to total air filtration with efficient energy use. The pressure drop shall not exceed 7 mm. The OEM shall submit a lab certificate to verify and test the media to showcase the media life analysis of the filters & Stage 4: Advance Oxidation Plasma (AOP) Cell Powered by nanoX & plasmOX technology comprising of nanoX chamber with a coating of 5 metals comprising nano TiO2, gold, copper, platinum & silicon along with EPA approved antimicrobial coating having antimicrobial coating targeted on Aluminum matrix cell duly enclosed by a poly quartz casing tube with the capability to produce ionized Hydroxyl oxidizers with in-built plasmOX to generate ion generator pins (+- ions 10^6). The nanoX chamber shall produce only Germicidal UV (99.99% UV-C energy).The filtration & Purification system shall be capable of reducing odor, bacteria, virus and spores , VoC, PM 2.5 & PM 10 and gaseous contamination. The filtration & Purification system shall have the following certification CE, GreenPro, FDA & Air Purification unit does not produce ozone, SARS COV 2 ICMR/ CCMB certification with reduction greater than 99 percent within 45 mins for naonX & plasmOX technology, CMR/ IIT – Human Safety certificate for naonX & plasmOX technology, Lab report /test certificate for naonX & plasmOX technology;. The certification for the same shall be attached along with the submittal. SITC of Electronic Motor fan of suitable rating and size with the latest technology with the acoustic insulation will be the scope of the agency. The Dimensions of the machine should be suitable to install in the Existing Smoking room complete as required and as directed by E-I-C.