REPAIR MAINT OF uPVC WINDOW, KITCHEN SHELF AND CABINET, CUPBOARDS SHUTTER AND OTHER B/R WORKS UNDER AGE (I) AYODHYA CANTT

Amount

Taking down chowkat with shutters (w/o taking off shutters from the frame) n.exc 1.5 Sqm complete all as specified and directed by Engineer-in-Charge.

Taking down chowkat with shutters (w/o taking off shutters from the frame) exc 1.5 Sqm but n.exc 4 Sqm complete all as specified and directed by Engineer-in-Charge.

S&F factory made uPVC white colour three track sliding window with fly proof S.S wire mesh (Two panels glazed & one panel with wire mesh) upto 1.50m height, frame made of size 110 X 45mm & sash 40 X 62 mm both having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of approproate dimensions comprising of uPVC multi chambered frame. with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 Kg) G.I fasteners 100x 8 mm size for fixing frame to finished wall and necessry stainless steel screws etc. Profile frame & sash shall be mitred cut and fusion welded at all corners including drilling holes for fixing hardwares and drainage of water etc. After fixing frame, the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge.

Note :- (a). Glazed shutters float glass thickness not less than 5.00 mm and wire mesh shutter with stainless steel wire mesh 0.36 mm dia with aparture 1.4 mm shall also be deemed included in quoted rates and No extra payment will be made separately. (b) uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

S&F casement window / ventilators lower portion fixed and upper portion with openable shutter /vertical slider single or multi shutters turn window and made out of upvc multi-cavity frame sections of 60x60x2.5mm suitable reinforced and double multi shutters division are made by using shash mullion having 50x64x2.5mm multi cavity upvc section ,suitable and reinforced with GI . shutters are made out of 50x85x2.5mm upvc section,reinforced and welded in corner with EDPM gasket provision for glass for air tight at frames and outer side of shutter with single glazed window fixed and adjusting suitable glass bead with perfect hardware like hinges,handle etc which is made out of UPVC extuded section of 61x27x2mm with GI channel of 1.20mm thick welded in corner complete all as specified and directed.Note:Glazed shutters glass thickness not less than 3.00mm and wire mess shutters with SS wire mesh as approved by Engr-in-Charge is also included no payment will be seperately.

S&F in repair, 18 /19mm thick PVC sheet minimum 600 Kg density grade 1 quality of both side plain white colour rigid and glossy finish fixed with screws, solvent cement / adhesive as per manufacturer's instructions to make kitchen cabinet / cupboard sides, top and bottom and shelves inside complete all as specified and directed. Note:- Kitchen cabinet / cupboard accessories like handle, hinges etc shall be measured and paid for separately against relevant item of work..

S&F in repair, 18/19 mm thick PVC sheet minimum 600 Kg density grade 1 quality one side decorative lamination and other side plain white colour to make kitchen cabinet / drawer / cupboard shutters fixed with screws, solvent cement / adhesive as per manufacturer's instructions to make kitchen cabinet sides, top and bottom and shelves inside complete all as specified and directed. Note:- (a)Kitchen cabinet / cupboard accessories like handle, hinges etc shall be measured and paid for separately against relevant item of work.. (b) Colour and design of prelaminated PVC board shall be approved by AGE (I) Engr-in-Charge.

S&F 100 mm long stainless steel (grades-304) handle, fancy type, polished bright chrome finish complete all as specified and directed.

S&F in repair, magnetic catcher of size 20x50mm, fixed to kitchen cabinet shutters complete all as specified and directed.

S&F continious (piano) hinges width of flap (when open) 30 mm open mild steel bright finish electro galvanized and fixed with screws complete all as specified and directed.

S&F in repair, 25mm dia stainless steel curtain rod with decorative end knobs and bracket complete all as specified and directed.

S&F brass floor door stopper of approved size complete all as specified and directed.

S&F artificial marble ledge 1200 X 1200 mm for framed shower encloser corner entry half rounded encloser of size-1200 X 1200 X 1950mm high with curved sliding door made of 6mm thick glasss and finished complete all as specified and directed. Make: - Jaquar model - ESA-GBL-LDG 1212 or equivalent as approved by Engr-in-Charge /AGE (I)

S&F artificial marble ledge 1000 X 1000 mm for framed shower encloser corner entry half rounded encloser of size 1000 X 1000 X 1950mm high with curved sliding door made of 6mm thick glasss and finished complete all as specified and directed. Make: - Jaquar model-ESA-GBL-LDG 1010.or equivalent as approved by Engr-in-Charge /AGE (I)

M/S PRAGATEE ENTERPRISES (BID ID -3281124)

M/S CHANDRIKA PRASAD AND SONS (BID ID -3278746)

ABC CONSTRUCTION CO. (BID ID -3281127)

Jairajyadav security services (BID ID -3281264)