SPECIAL REPAIR TO ROOF CEILING JOINERY OF BLDG NO P-67 AND P-75 AT BHALUKMARA SPECIAL REPAIR TO ROOF SHEETS, VALLEY SPECIAL REPAIR OF T-1 EXCHANGE AT MARAINI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as directed.

Demolition of cement concrete (un reinforced) in ground floors and paving n. exc. 15 cm thickness (below or above ground level) complete all as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar up to dia 150mm bore complete all as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as directed.

Taking down cement plaster from brick or concrete surfaces of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as directed.

Taking down and refixing in same opening aluminium shutters of any description exc 1 sq. m and not exc 2 sq. m each after necessary repair complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) exc. 1.5 Sq. M but not exc. 4.0 Sq M each, complete all as directed.

Dismantling structural steel work including doors , gates but excluding framed truss etc complete all as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as directed.

Dismantling asbestos cement (corrugated / semicorrugated, etc.) sheeting in roof covering including ridges complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as directed.

Dismantling expanded metal, any thickness or mesh, fixed with steel or wood fillets, if any (Weight per sq m N exc 4 kg) complete all as directed.

Taking up or down, steel tubing 15 mm bore, and connection including cleaning for re-fixing or removal from site of work complete all as directed.

Taking up or down, steel tubing 20 mm bore, and connection including cleaning for re-fixing or removal from site of work complete all as directed.

Taking down chowkhats or frame with shutters (without taking off shutters from the frame) not exc. 1.5 Sq. M complete all as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as directed.

Dismantling timber scantlings, unframed work, 40 sq. cm and over in section, in any position complete all as directed.

Demolition of reinforced cement concrete in any description and any position complete all as directed.

M & L for hacking out old broken glass exc 1.5 sq m (any thickness, size, quality or description) from metal frame including punching or drilling out glazing pins/springs clips and providing and fixing new ones complete all as directed.

M & L for hacking out old broken glass exc 1.5 sq m (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as directed.

M&L for 100mm thick PCC (1:4:8) type D-2 with using 40 mm graded stone aggregates as in sub base of flooring, finished even and rough to receive the top layers all complete as specified and as directed.

M & L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for RCC 1:1.5:3 type A1 using 20mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete as specified and as directed.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade with Grey cement and pigment complete all as specified and directed.

Materials and Labour for, Digital Non - skid Ceramic tiles, coloured, 7 to 8 mm thick area of each tile exceeding .11 sqm but not exceeding 0.18 sqm,conforming to IS 15622, Grade B II, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4),complete all as specified and directed.

Materials and Labour for, Digital glazed ceramic coloured tiles, 600 X 300 X 7-8mm /450MMX350MMX7-8MM thick, conforming to IS 15622, Grade B III, on vertical surface of wall such as dados, skirting etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick screed bed or bedding layer of cement mortar (1:4), complete all as specified and directed.

M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 20 mm thick screed bed or bedding layer of cement mortar (1:6), complete all as specified and directed

M & L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and including 15 mm thick rendering or bedding layer of cement mortar (1:4), complete all as specified and directed.

Materials and Labour for brick work with Sub Class ‘B’ bricks straight or curved on plan exceeding 6M mean radius built in cement mortar (1:6), complete all as specified and directed.

Materials and Labour for brick work with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in built in CM (1:4),complete all as specified and directed.

S & F 1.25mm thick steel rolling shutters without ball bearing of gear oerated type with chain wheel and hand chain as specified, including top cover, anchoring rod, hasp & staple and one shop coat of primer; erected in position as indicated complete all as specified and directed.

S & F mild steel safety lever locks with 4 levers for rolling shutters complete all as specified and directed.

S & F ball bearing for rolling shutters complete all as specified and directed.

Supply and fix mild steel TMT bars 10 mm dia. and over, cut to length, bend to shape required including cranking, bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. or securing with clips complete all as specified and directed

Supply and Fix, in repair 25 mm dia. Stainless steel conduit ,wall thickness 1.00 mm, overall PVC coated including suitable fixing brackets and fancy type end caps as in darpary rod for doors/ windows, complete all as specified and directed.

Supply and Fix Pressed steel frames 105 x 60 mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc. complete.

Supply and Fix Pressed steel frames 125 x 60 mm size for doors with one or more rebates including necessary fixing lugs, hinges, lock striking plate etc. complete.

S & F 35 mm thick plain framed, factory made panelled shutter (second class hard wood rails & styles) (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and Fix, 35 mm thick, factory made flush shutters, solid core construction, with particle board core and plywood face panels,both faces is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed.

S&F 2nd class hardwood Factory made Glazed and skeleton shutters 25 mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and directed

Supply and Fix, second-class hard wood timber scantlings, clean sawn, in unframed works and in any position, fixed with nails complete all as specified and directed.

Material and Labour for pre-painted, galvalume aluminium zinc coating GI based corrugated steel sheet, 0.50 mm thick of any colour, having tensile strength of 550 Mpa, as in roof covering/cladding to wall, fixed with self-tapping screws, complete all as specified and directed.Make(Tata bluescope/Sexena Marine Tech /Dyna )

Supply and fixing of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge and 250 mm wide eaves board, fixed with self tapping screws as specified. Make(Tata bluescope/Sexena Marine Tech /Dyna )

Supply and fixing of pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.80mm thick of an colour having tensile strength of 550 Mpa as, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed)) fixed with self tapping screws as specified. Make(Tata bluescope/Sexena Marine Tech /Dyna )

S & F for 0.63mm Galvanised, Corrugated Mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zink coating 275 fixed with L type or J type or cranked hook bolts complete all as specified and directed

Fixing only Galvanised, Corrugated Mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zink coating 275 fixed with L type or J type or cranked hook bolts complete all as specified and directed Note: Material shall be obtained from BOQ Item Serial No.09 )

Supply and Fix, solid PVC door frame of size 50 mm X 47 mm made out of 5 mm Prelam PVC sheet reinforced with MS square tube, fixed in opening all as specified and directed.

Supply and Fix, factory made wire gauzed PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

Supply and Fix, factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded prelam PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail and bottom rail: Panelling of both sides prelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, fixed to door frame complete all as specified and directed.

Supply and fixing of aluminium sliding window with powder coating (minimum thickness of powder coating 50 micron) including following components / specifications complete all as specified and as directed. (i) Two leaf glazed sliding shutter and one leaf gauged (fly proofing) sliding shutter. (ii) Opening of windows exceeding 0.90 Sqm but not exceeding 1.50 Sqm (iii) Thickness and weight per metre length of aluminium frame and section of shutter all as shown on drawing. (iv) All vertical/ horizontal joints shall be of extruded aluminium section so as to avoid any play between jointed members. (v) All other accessories such as jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, etc. (vi) Rest all as specified in drawing no CEZ/2015/TD/007 Sheet no 1R/5, 2R/5, 3R/5, 4R/5 & 5R/5. Note: Weight per RM of aluiminuim section will be checked by BOO as assembled by AO

Supply and fixing of aluminium sliding window with powder coating (minimum thickness of powder coating 50 micron) including following components / specifications complete all as specified and as directed. (i) Two leaf glazed sliding shutter and one leaf gauged (fly proofing) sliding shutter. (ii) Opening of windows exceeding 1.50 Sqm but not exceeding 2.40 Sqm (iii) Thickness and weight per metre length of aluminium frame and section of shutter all as shown on drawing. (iv) All vertical/ horizontal joints shall be of extruded aluminium section so as to avoid any play between jointed members. (v) All other accessories such as jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, etc. (vi) Rest all as specified in drawing no CEZ/2015/TD/007 Sheet no 1R/5, 2R/5, 3R/5, 4R/5 & 5R/5.

Supply and fixing of aluminium sliding window with powder coating (minimum thickness of powder coating 50 micron) including following components / specifications complete all as specified and as directed. (i) Top Hung gauged (fly proofing) shutter and bottom portion fixed glazed. (ii) Opening of windows not exceeding 0.90 Sqm. (iii) Thickness and weight per metre length of aluminium frame and section of shutter all as shown on drawing. (iv) All vertical/ horizontal joints shall be of extruded aluminium section so as to avoid any play between jointed members. (v) All other accessories such as jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws, etc. (vi) Rest all as specified in drawing no CEZ/2015/TD/007 Sheet no 1R/5, 2R/5, 3R/5, 4R/5 & 5R/5. Note for item ser No. to :- 1. Sheet glass, aluminium grill and stainless steel wire mesh shall be measured and paid against respective items of BOQ and all other items as shown on drawing shall be included in quoted rate. 2. Mode of Measurement : Only opening size of window shall be measured.

S&F aluminium anodised grill of design "DG - 104" pattern made out of 7.5 mm plate and finished grill have 7.5 mm width and 6 mm thick complete all as per manufacturer instruction. Make : Decogrille or equivalent model of makes as approved by the GE.

S & F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

S & F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc., n exc 10 kg each brackets, conforming to Fe 410-0 or Fe 310-0 (Brackets over 10 kg each to be measured under ‘Structural Steel` complete all as specified and directed

Supply and Fix,IS markedStainless steel butt hinges, medium weight, cold rolled 75 mm size complete all as specified and directed

S & F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy to door shutter complete all as specified and directed

Supply and fix Aluminium anodized barrel tower bolts of extruded section, 150 mm long complete all as specified and directed.

S & F 200mm long Stainless steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

Supply and Fix, aluminium handles, Fabricated type, anodized, 150 mm size, complete all as specified and directed.

S & F 150mm stainless steel pressed designer handles, oval type, stove enamelled black complete all as specified and directed.

S & F 125mm stainless steel pressed designer handles, oval type, stove enamelled black complete all as specified and directed.

Supply and Fix,3 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sq M in each pane complete all as specified and directed.

S & F of figured glass, pin head type 4mm thick in squares n.exc 0.50 Sqm in each pane complete all as specified and as directed.

Supply and Fix,4 mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50 Sq M in each pane complete all as specified and directed.

S&F Glazing with sheet glass 5 mm thick ordinary quality in panels of aluminium windows, ventilator, etc. fixed with glazing clips, rubber beading and EDPM gasket in square not exceeding 0.5 Sqm in each pane.complete all as specified and as directed

Materials and Labour for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290, Grade E-165 complete all as specified and directed.

S & F in repair 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and Fix, stainless steel wire cloth, 0.36mm nominal dia. of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F round door magic eye as in main door shutter including cutting holes, etc. complete all as specified and as directed.

M&L for false ceiling with powder coated EXPOSED GI grid suspension system (E-grid T-2420 or equivalent of Armstrong having load carrying capacity of 12.5 Kg/Sqm with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of main runner 3600 mm long, cross tee 1200/600 mm long and wall angle. The wall angle shall be fixed on PVC dash fasteners on the perimeter of the wall with steel screws with distance 300 mm c/c. The main runners to be placed @ 1200 mm, the cross tee 1200 mm will be inserted in the pre-cut slots of main runner at regular interval of 600 mm to form a modular grid of 1200 x 600 mm. Additional cross tee of 600 mm shall be placed perpendicular to the cross tee 1200 mm long to finally form a grid of 600 mm x 600 mm with and including 6 mm thick HPSC (High Pressure Stem Cured) oceanic pre-primed, self embossed, textured designer board, water, termite and fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 2 to 3 mm dia GI wire hangers fixed with steel dash through fasteners from purlins with butterfly clips (weight 0.007 Kg/clip), hold down clips (weight 0.0035 Kg/clip), with provision of light fitting fixture complete all as per manufacturer instructions and all as shown and specified on page No XIV and XV of SSR Part-II 2010 (Rates).

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded aggregates as in plinth protection including finishing surface even and smooth without using extra cement and laid in panels including joints filled with sealing compound grade A complete all as specified and directed.

Materials and Labour for 100 mm thick plain cement concrete (1:2:4) type B2 using 40 mm graded aggregates as in floor including finishing surface even and smooth without using extra cement and laid in panels including spike rolling to surfaces or making impressions of expanded metal , whitlst the concrete is green complete all as specified and directed.

Materials and Labour for 75 mm thick plain cement concrete (1:3:6) type C2 using 40 mm graded aggregates as in as in floor including finishing surface even and smooth without using extra cement and laid in panels complete all as specified and directed.

M&L for PCC type B-1, 1:2:4 (using 20mm graded aggregate) as in bed block for fixing of hold fast filling concrete in door frame, cills, railling up to 60 cm in height etc including necessary form work as required complete all as specified and as directed.

S&F 50 mm dia low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. cm fixed complete to walls, ceiling or in floors etc including cutting, chasing, pinning and making floor good with existing one all as directed

Supply and Fix, in repairs 110 mm bore UPVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls or laid in trenches with including fittings, complete all as specified and directed.

Fixing , in repairs 110 mm bore UPVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls or laid in trenches with including fittings, complete all as specified and directed.

Supply and Fix, in repairs 75 mm bore UPVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls or laid in trenches with including fittings, complete all as specified and directed.

Supply and Fix, 110 mm bore PVC (SWR) bends any radius, with access door, complete all as specified and directed.

S&F 110mm dia PVC(SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed.

Supply and Fix, PVC (SWR) floor trap, plain with grating including jointing with solvent cement with dia. of out let 75 mm, complete all as specified and directed.

S & F of 15mm size PVC connections with PTMP nuts of length 450mm complete all as specified and directed.

S&F in repairs PVC valve less syphonic action type flushing cistern low level white, dual flush, ISI marked (IS: 7231) with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including PVC connection and 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor including taking down existing complete all as specified & directed.

S & F in repair double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed

S & Fin repair brass mortice lock for aluminium door , vertical type, 2 Levers and 100mm size complete all as specified and directed

S & F cast brass fanlight pivot with plate size 25mm x 65mm and suitable for 30mm thick shutters complete all as specified and directed

Supply and Fix, in repair bib tap, cast copper alloy, fancy type, chromium plated, with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule,15 mm bore and fixed, complete all as specified and directed.

Supply and Fix, in repair stop valves/Angle cock, cast copper alloy, fancy type, chromium plated,screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe of for unions, 15 mm bore, complete all as specified and directed.Make: Jaquar or equivalent make of MARC/Kohler)

Supply and Fix, in repair pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe, 15 mm bore, including taking down existing unserviceable one complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 15 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.

M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth in brick walls complete all as specified and directed.

Materials and Labour for galvanized steel tubing, medium grade, 20 mm bore with all fittings and fixed complete to walls and ceiling or laid in floor, complete all as specified and directed.

S & F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shapped door and window stops and the like, including all necessary labours; articles n exc 200 cu. cm each complete all as specified and directed.

Supply and Fix, in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring and with overall length of cover plate 150 mm, fixed in floor, complete all as specified and directed.

Supply and Fix, in repair brass chromium plated shower rose Overhead Shower 150X150mm Square Shape Single Flow (ABS Body Chrome Plated with Gray Face Plate) with Rubit Cleaning System fixed to steel pipe or union 15 mm bore with and including 225mm long arm, complete all as specified and directed.Make:Cat No.OHS-35495Jaquar or equivalent make Kohler/MARC)

Supply and Fix, brass chromium plated, towel rail, 20mm dia, 60cm long between flanges, complete all as specified and directed.Make Jaquar or equivalent of Marc/Kohler

S&F 1000 ltrs IS marked multilayer rotational moulded polythytene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with and including 25mm PTMT ball valves high pressure with polythene float and nut with and including dismantling exsiting one complete all as specified and directed .

S&F vitreous china squating pan orissa pattern size 580x440 mm white with integral foot rest complete including lime concrete (excl flushing cistern and flush pipe )but connecting to flushing pipe , anti symphonage pipe etc with and including lime concrete bedding and demolition of existing one complete all as specified.

S&F in repair vitreous chaina wash hand basin 550x400mm (flat back type) including cutting for and pinning in ends of brackets with and including 32mm CP waste coupling fittings, , and waste water pipe complite all as specified and as directed.

S & F in repair of Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and as directed.

Supply and Fix in repairs, brass chromium plated soap dish, 100 mm dia., fixed with brass chromium plated screws, complete all as specified and directed. (Make Jaquar Cat No.7731 /Marc/Kohler)

S & F wire netting of galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples, size of mesh 12mm complete all as specified and directed.

S & F in repair 200mm long mild steel semi barrel tower bolt, riveted or spot welded type with back plates, with bright bolt and open staple

M&L for preparation of new or previously undecorated wooden surface of any description, not otherwise described over 10 cm width or girth and applying two coats of Synthetic enamel paint over one coat of pink primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel base surface of any description, not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel painting complete all as specified and as directed.

Material and Labour for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel and iron surface exceeding 10 cm in width or girth including preparation of surfaces complete all as specified and directed.

M&L for preparation of old painted surfaces of wood base surface of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel painting complete all as specified and as directed.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:4) on surface fair face of brickwork in walls and finishing surface even and smooth without using extra cement, complete all as specified and directed.

Materials and Labour for rendering 15 mm thick, cement plaster, in cement mortar (1:6) on surface fair face of brickwork in walls and finishing surface even and smooth without using extra cement, complete all as specified and directed.

Materials and Labour for rendering 5 mm thick, cement plaster, in cement mortar (1:4) mixed with water proofing compound as per manufactures instructions over and including 10mm thick backing coat in cement mortar (1:4) on fair faces of brick work or concrete surface in walls, complete all as specified and directed. Note: - (Water proofing compound will be measured and paid separately)

Supply only Liquid water proofing compound conforming to IS: 2645 - 1975 specification complete all as specified and as directed (Make : CICO No- 1/SIKA/ACCO PROOF).

M&L for preparation of new plastered surfaces of walls including cornices, pilasters and other wall features etc by washing, rubbing down and stopping and applying two coat acrylic distemper on new surfaces with and including 2 mm thick wall care putty with a coat of primer as per manufacturer,s instructions complete all as specified and as directed.complete all as specified and directed Make;Berger (Bison)/J&N(Jensolin)/Asain Piants(Tractor)/Nerolac(Beauty)

M&L for complete removal of existing treatment from walls, ceiling, etc and applying two coats acrylic distemper on walls, ceiling over and including a coat of 2 mm thick white wall care putty with and including a coat of primer complete all as specified and as directed.Make;Berger (Bison)/J&N(Jensolin)/Asain Piants(Tractor)/Nerolac(Beauty)

M&L for preparing old decorated plastered or unplastered surfaces of ceiling including cornices, pilasters and other wall features etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and treating oil and greasy spots etc and applying one coat of white washing on the ceiling all as specified and directed

Material and Labour for complete removal of existing treatment and applying two coats of cement-based paint, white or tinted over and including priming with alkali resistant priming paint to old plastered or unplastered surfaces on walls including preparation of surfaces, complete all as specified and directed.

Material and Labour for applying two coats of cement-based paint, white or tinted to new plastered surfaces on walls including priming with alkali resistant priming paint and including preparation of surfaces complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil ,complete all as specified and directed.

Returning filling in soft/loose soil, including, spreading levelling watering and well ramming in layers not exc. 25 cm complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50 Metres and depositing where directed at a level n. exc. 1.5 M above the starting point complete all asspecified and directed.

Supply and filling in approved dry sand in cable trenches before and after the cables are laid, as in sand cushioning to cables, complete all as specified and directed.

Supply,laying, jointing and testing of LT, XLPE insulated, PVC sheathed, armoured, heavy duty electric cables with aluminium conductor for working voltage up to and including 1100 volts, of cross sectional area 25 sq. mm, 4 core, complete all as specified and directed. Make : Havells//KEI/RR Cable

Supply and laying common burnt clay building bricks, sub-class ‘B’ designation 75, old size bricks, in cable trenches, as cable protection, complete all as specified and directed.

Supply & fixing for Double door, 415V, Triple pole and neutral, 4 way with 200 amps rated bus bar Sheet Metal enclosures for DBs when MCBs to be used complete all as specified and directed.

Supply and Fix, miniature circuit breaker (MCBs),TPN, 415 Volts,10KA, C curve 63- Amps complete all as specified and directed.

Supply and Fix, miniature circuit breaker (MCBs), single pole, C-curve 240 Volts,10KA, 6-32 Amps complete all as specified and directed.

Supply and Fix, miniature circuit breaker (MCBs), single pole and neutral, 240 Volts,10KA, 40 Amps C- curve series complete all as specified and directed.

Supply and Fix, double door, sheet metal enclosure for DBs for mounting of MCB for 415 Volts, 4 way, with 200 Amps rated bus bar, Single Pole & Neutral, including blanking plates as required & flush to wall complete all as specified and directed. [Cat No.DBSPN004DD of Make L&T or equivalent Model of Make Legrand/Siemens]

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switches/ regulator /bell push etc and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for, one light point or one fan point controlled by one switch, complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switch/socket outlet etc and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for one 3 pin socket outlet, 5 amps, independent,, complete all as specified and directed.

Materials and Labour for point wiring with 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for, one 3 pin socket outlet, 5 Amps on the same board with other switches,complete all as specified and directed.

Materials and Labour for point wiring with 2.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed, multi stranded copper conductor cable 1100 Volts grade, single core, laid in and including PVC casing and capping complete with all fittings and accessories, fixed to walls/ceiling, including sunk type pressed steel terminal boxes 60 mm deep, conforming to IS-5133 (Part-I) with 3 mm thick plastic laminated sheet cover (ISI Marked) for mounting switch/socket outlet etc and including 1.50 Sq. mm (nominal area) FRLSH PVC insulated and unsheathed multi stranded copper conductor cable 1100 Volts grade, single core, earth continuity conductor connected to common earth dolly for one 3 pin socket outlet, 15 amps, independent,, complete all as specified and directed.

Supply and Fix, switch piano, flush button, single pole, one way, 5 Amps, complete all as specified and directed.

Supply and Fix, ceiling rose, three terminal, PVC/ Polycarbonate insulated body, complete all as specified and directed.

Supply and Fix, switch socket combination, 3/5 pin, 5 Amp,flush type , complete all as specified and directed.

Supply and Fix, switch socket combination 3/5 pin 16A, flush type, complete all as specified and directed.

S & F Socket outlet, 3 pin, 5 Amp, Flush type complete all as specified and directed.

Materials and Labour for two single core FRLSH PVC insulated unsheathed cable 4.00 Sq. mm. (Nominal area) with stranded copper conductor cable, 1100 Volts grade, drawn in PVC Casing and Capping and continuous earth wire of single core FRLHS PVC insulated, unsheathed cable 2.50 Sq. mm (nominal area) with stranded copper conductor cable, 1100 Volts grade for sub main wiring, complete all as specified and directed.

Supply and Fix, LED roadway luminaire, 15 Watts, with pressure die-cast aluminium housing, high power LEDs as light source and electronic driver, colour temp 6000 K, all as per Cat No. LHETAXU7IN6W015 of Make ‘Havells’ or Equivalent Model of Make Bajaj/Philips and including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.75 Sq mm, 3 core, 1100 Volts grade, from light fitting to point outlet,and including provision of fixing bracket made out of 25 mm bore galvanized steel tubing, medium grade, (1.5 RM Approx), bent to shape required and fixed to wall/pole with FI clamp 25 X 3 mm, nuts, bolts and washers, complete all as specified and directed.

Supply and Fix, energy efficcient light fitting 24 W mounted LED batten , extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver all as per Cat No. LCTLRP-24-FO-CDL of Make ‘Crompton’ or Equivalent Model of Make Bajaj/Philips and including provision of PVC insulated, sheathed round flexible wire with multi stranded copper conductor of size 0.50 Sq mm, 3 core, 1100 Volts grade, from light fitting to point outlet, complete all as specified and directed.

Supply and Laying galvanized steel tubing, 40 mm bore, light grade, in trenches or fixed to poles/Walls etc., for cable protection, complete all as specified and directed.

Materials and Labour for earthing complete with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground vertically to a depth not less than 2.25 meter deep below ground level with top edge earth plate at a depth not less than 1.5M below normal ground level connected to galvanised steel earth lead wire 4 mm dia. by means of bolts, nuts check nuts and washers of galvanised steel and connected to main switch board or main control board as directed and including provision of concrete pit in PCC (1:3:6) type C1, pre-cast RCC (1:2:4) type B1 cover slab 54 cm x 54 cm x 5 cm reinforced with 8 mm dia. TMT bars @ 150 mm centre to centre both ways, with one handle for lifting made out of 8 mm dia. MS bar, provision of funnel, wire mesh, 20 mm bore galvanized steel tubing (Medium grade) for watering, charcoal or coke and salt in alternate layers, 15 mm bore galvanized steel tubing medium grade for protection of earth lead connection, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown on electrical plate No 3 of SSR Part –I (2009)

M/S GOPAL ROY AND CO

A K DUTTA CHOWDHURY AND CO