Work of restringing new 11KV Weasel conductor of 11 KV Ribandar feeder from Hoble RMU to Hoble DTC at Ribandar under the Jurisdiction of Sub Div II U Panaji

Supply of RCC poles 9.00 mtr long as per Drawing CEE/C-836

Providing and laying in PCC 1:2:4.(1 Cement : 2 Coarse sand : 4 granitic or basaltic stone aggregate 40m nominal size) excluding cost of centering, shuttering and finishing. All works upto plinth level. (Muffing for 9 Nos of Poles)

Supply of Cut point 'X' arm of channel of ISMC 75 (75 x 40 mm) 1.3 Mtr long for 11KV, Cross arm not to be welded/joined at any place.

Supply of HDGI 11 KV V-shape 'X' arm of channel ISMC 75 (75 x 40mm)

Supply of HDGI Top fitting cross arm ISMC channel, ISMC 75 (75 x 40mm), 0.7mts long for llKV, Cross arm not to be welded/joined at any place.

Supply of G.I. Stay rod & plate 11 KV line (as per drawing no. CEE/E-465 R)

Supply of G.I. Turn Buckle with eye bolt 11 KV (as per drawing no. CEE/E-500)

Supply of HDG.I. stay wire 7/10 SWG (As per GED standard data)

Supply of Break insulators 8 KV (44KN)

Supply of 16 mm G.I. Washers

Supply of G.I. Nuts & Bolts 100x16mm

Supply of HDGI stay clamps for Rail Pole 901b S.A.

Supply of HDGI stay clamps for RCC Pole 9 mtr S.A.

Supply of HDGI 'X' arm clamps for RCC Pole 9.00 mtr S.A.

Supply of HDGI 'X' arm clamps for 90 lb Rail Pole LA, (Dimensions/specifications as per drawing no. CEE/E-515)

Supply of Packing Pieces for 901b/yd Rail pole., (Dimensions/specifications as per drawing no. CEE/E-514 Rev-11)

Supply of Enamelled Danger board 11000 Volts The plate should be made from mild steel at least 1.6mm thick and vitreous enamelled white with letters, figures and convectional skull and bones in signal red color on the front side. The rear side of the plate shall be enamelled. All lettering should be centrally spaced The corners of the plates should be rounded offsize" 250mm x 200 mm. (as per drawing no. EE-11- 3/2001, CEE/E/490)

Supply of ACSR conductor WEASEL 6 +l / 2.59 mm nominal aluminium area 30mm2 (139 amps max. at 45° C)

Supply of Disc insulators ball and socket type 70 KN

Supply of Disc insulators 70 KN 3-bolted type hardware fitting 70KN suitable for 11 KV ball and socket type disc insulators of 18mm pin, failing load of 70KN. Conform to IS-2486 Part 1-1993, 2486 Part 2-1989 as amended upto date.

Supply of 11 KV Pin Insulator with H.D.G.I. Pin.

Supply of GI Barbed wire for Anticlimbing device

Supply of XLPE 11 KV 3C x 95 sq.mm armoured cable.

Supply of 11 kV cable end termination kits outdoor type suitable for 3C x 95 sqmm

Earth work excavation in foundation trenches or drain including opening of roads, chamber, pavements and soiling, ramming, leveling of bottoms, making bottom free from stones including removing out the excavated soil/ material as directed. ( 80 x 0.6 x 1)

Back Filling of the available excavated earth (excluding rock) in trenches, plinth, sides, foundation etc. in layer work exceeding 0.2 mtr. depth consolidating each deposited layer by ramming and watering. (80 x 0.6 x 0.8)

Supplying and laying of sand.(80 x 0.6 x 0.2)

Supply and laying of underground cable protective covers as per specifications as given below: PCC Precast cable protective cover of size 480 mm x 250 mm x 50 mm casted by confined mold vibratory cast of concrete mix M30 having strength of 30N/mm2 at 28 days.

Supply of Warning tape

Laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. 80 mm thick in grey colour (M40 grade)

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. (12 x 1.5 x 0.2 mt)

Painting of Rail poles (Painting including scrapping of old paint applying one coat of primaer (red oxide) and two coats of silver (aluminium) paint, for following size

Removal of M.S. Rail Poles 90 lb/yd 11 mts

Removal HDGI 11 KV V-shape 'X' arm of channel ISMC 75 (75 x 40mm)

Removal of old Weasel conductor

Erection of RCC poles 9.00 mtr long as per Drawing CEE/C-836

Laying in PCC 1:2:4.(1 Cement : 2 Coarse sand : 4 granitic or basaltic stone aggregate 40m nominal size) excluding cost of centering, shuttering and finishing. All works upto plinth level. (Muffing for 9 Nos of Poles)

Erection of Cut point 'X' arm of channel of ISMC 75 (75 x 40 mm) 1.3 Mtr long for 11KV, Cross arm not to be welded/joined at any place.

Erection of HDGI 11 KV V-shape 'X' arm of channel ISMC 75 (75 x 40mm)

Erection of HDGI Top fitting cross arm ISMC channel, ISMC 75 (75 x 40mm), 0.7mts long for llKV, Cross arm not to be welded/joined at any place.

Erection of G.I. Stay rod & plate 11 KV line (as per drawing no. CEE/E-465 R)

Erection of G.I. Turn Buckle with eye bolt 11 KV (as per drawing no. CEE/E-500)

Erection of HDG.I. stay wire 7/10 SWG (As per GED standard data)

Erection of Break insulators 8 KV (44KN)

Erection of 16 mm G.I. Washers

Erection of G.I. Nuts & Bolts 100x16mm

Erection of HDGI stay clamps for Rail Pole 901b S.A.

Erection of HDGI stay clamps for RCC Pole 9 mtr S.A.

Erection of HDGI 'X' arm clamps for RCC Pole 9.00 mtr S.A.

Erection of HDGI 'X' arm clamps for 90 lb Rail Pole LA, (Dimensions/specifications as per drawing no. CEE/E-515)

Erection of Packing Pieces for 901b/yd Rail pole., (Dimensions/specifications as per drawing no. CEE/E-514 Rev-11)

Erection of Enamelled Danger board 11000 Volts The plate should be made from mild steel at least 1.6mm thick and vitreous enamelled white with letters, figures and convectional skull and bones in signal red color on the front side. The rear side of the plate shall be enamelled. All lettering should be centrally spaced The corners of the plates should be rounded offsize" 250mm x 200 mm. (as per drawing no. EE-11- 3/2001, CEE/E/490)

Erection testing & commissioning of ACSR conductor WEASEL 6 +l / 2.59 mm nominal aluminium area 30mm2 (139 amps max. at 45° C)

Erection of Disc insulators ball and socket type 70 KN

Erection of Disc insulators 70 KN 3-bolted type hardware fitting 70KN suitable for 11 KV ball and socket type disc insulators of 18mm pin, failing load of 70KN. Conform to IS-2486 Part 1-1993, 2486 Part 2-1989 as amended upto date.

Erection of 11 KV Pin Insulator with H.D.G.I. Pin.

Erection of GI Barbed wire for Anticlimbing device

Laying, testing and commissioningof XLPE 11 KV 3C x 95 sq.mm armoured cable.

Erection testing and commissioning of 11 kV cable end termination kits outdoor type suitable for 3C x 95 sqmm

Earth work excavation in foundation trenches or drain including opening of roads, chamber, pavements and soiling, ramming, leveling of bottoms, making bottom free from stones including removing out the excavated soil/ material as directed. ( 80 x 0.6 x 1)

Back Filling of the available excavated earth (excluding rock) in trenches, plinth, sides, foundation etc. in layer work exceeding 0.2 mtr. depth consolidating each deposited layer by ramming and watering. (80 x 0.6 x 0.8)

Supplying and laying of sand.(80 x 0.6 x 0.2)

Laying of underground cable protective covers as per specifications as given below: PCC Precast cable protective cover of size 480 mm x 250 mm x 50 mm casted by confined mold vibratory cast of concrete mix M30 having strength of 30N/mm2 at 28 days.

Laying of Warning tape

Laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. 80 mm thick in grey colour (M40 grade)

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. (12 x 1.5 x 0.2 mt)

Painting of Rail poles (Painting including scrapping of old paint applying one coat of primaer (red oxide) and two coats of silver (aluminium) paint, for following size

Removal of M.S. Rail Poles 90 lb/yd 11 mts

Removal HDGI 11 KV V-shape 'X' arm of channel ISMC 75 (75 x 40mm)

Removal of old Weasel conductor

Please Enable Macros to View BoQ information