Loading…
Loading…
Tender Value
₹1.3 Cr
EMD Value
₹2.6 L
Closing Date
29 Jun 2026, 3:00 pm
General Electrical wiring, Bus trunking and Associated works in C&W Workshop, Alambagh, Lucknow
ElectWAMV180E2026-27
ElectWAMV180E2026-27
Open
24 Months
Lucknow, Uttar Pradesh
₹0
₹2.6 L
6 Jun 2026
6 Jun 2026
15 Jun 2026
1-Supply and Fixing of wall mounted circulating fans 600 mm sweep
Supply and Fixing of wall mounted circulating fans 600 mm sweep operating voltage 230 V AC speed 1400 RPM complete in all respect.
2-Erection, laying, testing and commissioning of LT / HT XLPE/PVC
Erection, laying, testing and commissioning of LT / HT XLPE/PVC insulated PVC Sheathed multi-stranded armoured aluminium conductor 3½ Core/4.0 core Cable of any size (Only required LT / HT Cable to be supplied by the Railway).
3-Supply, fixing, testing & commissioning of
Supply, fixing, testing & commissioning of 5 Mtrs high hot dip galvanized octagonal pole double arm.
Supply, fixing, testing & commissioning of LED street light fitting complete with driver (40-45 Watts).
4-Supply, Installation, Testing and Commissioning of 16 Mtrs High mast
Supply, Installation, Testing and Commissioning of 16 Mtrs High mast lightning 4 system complete with 08 nos 120 W LED flood light confirming to CEE/NR specification No CEE/NR/121-Elect/PS/2019 (Rev-4) dated 04.11.2019 or latest (Make; Havells, Bajaj, Halonix, Phillips, Crompton, C & S only) in all respect as per technical scope of work Make of High Mast Tower: Bajaj, Phillips, Crompton.
5-Supply, Fixing, Testing and commissioning of C-line manual
Supply, Fixing, Testing and commissioning of C-line manual changeover switch FR6 1250 A 4P 415 V AC open execution extended handle centre operation with complete MS enclosure make L & T, Siemens or ABB.
6-Horizontal directional drilling for laying HDPE 125 mm / 200 mm dia
Horizontal directional drilling for laying HDPE 125 mm / 200 mm dia pipe 1.4 mt to 6 2.1 mt below formation of earth level, below ballast as per drawing and instruction of engineer at site. The work in inclusive of all the material equipment & Labour required during trenches horizontal Directional drilling & supply , Fixing of 125 mm DHPE pipe.
7-Bus Bar Trunking
Supply, Installation, Testing & Commissioning of compact Air Insulated Type 3P + 100 7 5 N 400 Amps Horizontal Distribution Bus Trunking of Aluminium Bus Bar with IP-54 protection, Temp rise of 50 Deg over an ambient of 40 Deg, having short circuit current capacity of 50 KA per second with taps at 0.5 m internal both sides, End cover, Brackets, PVC sleeving and 2 Nos of external aluminium earth strips size as per IEC-60439- 1 & 11
Centre feed unit with 400 Amps MCCB thermal magnetic release and 35 KA breaking capacity.
Main Panel with 400 A MCCB 50 KA short circuit rating microprocessor controlled with O/C and E/F protection with LED type phase indication lights.
Plug in box with MCCB 63 A with thermal magnetic release and 35 KA breaking Capacity.
Plug in box with MCCB 100A with thermo magnetic release and 35 KA breaking capacity.
Plug in box with MCCB 200 A with thermal magnetic release and 35 KA breaking capacity.
Bracket with Horizontal support.
Fabrication, Supplying at site and erection of MS angle frame, MS Flat for fixation of distribution panel, bus truncking cable tray etc as per site requirement.
8-Supply and recessing/fixing of PVC conduit pipe 25mm-40mm
Supply and recessing/fixing of PVC conduit pipe 25mm-40mm medium with accessories, junction box, etc. including making chase, plastering/ clamping etc. complete in all respect as per site requirement. PVC conduit pipe should be as per IS: 9537 (Part 3) - 1983
9-Supply and installation of Battan/Angle Holder/ Ceiling Rose &
Supply and installation of Battan/Angle Holder/ Ceiling Rose & installation of junction box of laid conduit including connections, testing and commissioning etc. complete in all respect as per site requirement
10-Laying, underground/road/railway track, recessing in plate form/wall
Laying, underground/road/railway track, recessing in plate form/wall along with Rly. Track/in laid RCC/ GI pipe as required 1.1 KV grade LT XLPE insulated armoured, aluminium 10 conductor cable including making chase & plastering after laying of cable/digging of cable trench, sand cushioning, protective covering with second class bricks, provision of cable route marker as per Tech. Specification including end terminations with Aluminium Crimping sockets/lugs, testing and commissioning of sizes Above 25 sq.mm to 400 sq.mm as per site requirement. (Cable shall be supplied by Railway )
11-Supply of following sizes FRLS PVC insulated multi stranded copper
1.0 Sq.mm (Earth Wire) green colour.
12-Supply, fixing, testing and commissioning of Concealed GI / PVC
13-Supply testing commissioning of following Modular switch plate
2/3 Module Plate
12 Module plate
18 Module plate
14-Supply, fixing ,testing and commissioning of Modular switches,
Modular switch 10 A (1-way) as per IS 3854: 1997 (latest)
Modular Socket Outlet 6 Pin 20 A as per IS 1293: 2005 (latest)
Modular Fan Regulators as per IS 11037: 1984 (latest)
Modular Socket Outlet 5 Pin 10 A as per IS 1293: 2005 (latest)
Modular switch 20 A (1-way) as per IS 3854: 1997 ( latest)
Buzzer or bell as per requirement
15-Supply, fixing, testing and commissioning of 4 Module MCB Protected
Supply, fixing, testing and commissioning of 4 Module MCB Protected Socket with sheet Steel enclosure along with MCB and socket 25A similar to Havells Catalogue No. DHDMCDP0253025 Or Equivalent.
16-Supply, fixing, testing and commissioning of LED light full glow 36W,
Supply, fixing, testing and commissioning of LED light full glow 36W, 2'X2' Recessed mounted type, confirming to CEE/NR specification no. CEE/ NR/ 121-ELECT/PS/2017 (Rev-2), dated: 26.09.2017 (latest version) Make: Phillips, Crompton, Bajaj, Osram, Panasonic, Ekos.
17-Supply, erection testing and commissioning of LED tube light fitting
Supply, erection testing and commissioning of LED tube light fitting (18- 20) Watt, 17 integrated with aluminium extrusion base, LED chip and inbuilt driver, diffuser of polycarbonate, 1200 mm length, nominal voltage 230V, AC +/- 5%, 50 Hz, input voltage 140-270 V,AC, CRI 80, ingress protection IP:20, system lumen efficacy 110 lumen/watt. Make- Philips, Bajaj, Havells, Ekos, Panasonic.
18-Supply, erection testing and commissioning of super energy efficient
Supply, erection testing and commissioning of super energy efficient electric ceiling fan (32-35) watt, BEE star rating: 05, 1200 mm sweep,230V, AC, 50 Hz. Air delivery 220 CuM/Min, ISI 18 marked, power factor equal or more than 0.95, Insulation class-B, Ceiliing fan shall be passed for surge immunity of 2.5 kV EMI/EMC test, High voltage protection beyond 275 V, constant speed from 140V to 270V, AC and low voltage start ability 80V, AC. The over all specification shall be confirming to IS: 375-1979 with ammendt no. ,2,3,4,5,6 or latest.
19-Supply, erection testing and commissioning of LED 6-9 Watt, Picture
Supply, erection testing and commissioning of LED 6-9 Watt, Picture light/ Bulkhead light make Philips.
20-Supply, erection testing and commissioning of LED 09 Watt Bracket
Supply, erection testing and commissioning of LED 09 Watt Bracket light make Philips.
21-Supply, erection testing and commissioning of LED 05 Watt Mirror
Supply, erection testing and commissioning of LED 05 Watt Mirror light make Philips.
22-Supply erection testing and commissioning of fresh air exhaust fan
Supply erection testing and commissioning of fresh air exhaust fan 220V, 250 mm, 1250 rpm, on existing wall and connection with nearest socket/ceiling rose.
23-Supply, Fixing, testing and commissioning of MCB distribution box,
Supply, Fixing, testing and commissioning of MCB distribution box, double door, deep drawn powder coated 04 way, TPN with following switch gears. Incoming: - MCB 63 A, 04 pole-01 no. Outgoing: MCB 16-25 A, SP - 12 Nos.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
180E-TenderDocFinal_1.pdf
ATTACHMENT
GuidelinesforHighMast3.6.26.pdf High Mast Guidelines
ATTACHMENT
Laborcode-2026.pdf
ATTACHMENT
GuidelinesforHighMast3.6.26.pdf
ATTACHMENT
Download all tender documents and submit your bid