Supply, Installation, testing and commissioning of complete 20 meter High Mast Lighting system together with the entire electrical supply network and other allied works needed for it under Transmission Sub-division, Chandil-I

Supply of 20 mtr. high mast in two section construction S-355 Grade as per BS-EN-10025, top dia 150mm, bottom dia 410mm, Plate thickness 3mm, 20 side polygon. Galvenized as per BS EN ISO-1461, Base plate dia 570mm, base plate thickness 25mm. G.I. single spike lighting protection, maximum wind speed 47 M/Sec with 8 number of foundation Bolt of PCD for 490mm TS 600/30mm dia /850 mm long luminaries carriege ring 535 mm (ID) with 8 arm. welded 2 section having carrying capacity upto 24 luminaries, trailing cable 5-core 4 sq.mm PVC flexible copper conductor winch/Power Tool. Double drum, SWI 750 Kg with 1 HP 6 Pole single speed integral motor, Rope; Grade AISI 316,7/19 construction, dia 6mm, BLC 2350X2 having 2 number of continious rope Aviation obstruction light twin dome aviation obstruction light LED type as required. (But excluding feeder piller)

Outdoor stand mounted feeder panel with 63 Amp TP&N, MCB incomer, 63Amp TP contactor automatic switching of luminaries power tools control incomer outgoing terminal etc. as required.

EPR insulated/PVC sheathed copper conductor trailing cable 5-core 2.5 sq. mm for high mast.

6mm dia stainless steel wire rope of bracking load capacity 2350 kg x 2 for 20 Mtr High Mast

Winch power tool for high mast of double drum

1.5 HP AC motor with foreward and reverse motion for high mast

Twin dome aviation light for high mast

Supply installation testing and commissioning of 240 w rating LED flood lighting luminarie with pressure die cast housing and toughened glass cover (IP-66 protection) in existing panel or pole/pipe for supply voltage 100~270V AC 50 Hz. Luminarie shall be confirm to IS:10322 paart-5/Section-5 and shall be complete with all necessary accessories as required. with all source like manpower and consumables required for it. Make-CGL/BAJAJ/SYSKA/PHILIPS

Supply of XLPE power cable (Size-4C X 16 Sq. mm, Make- Havels/Polycab/Finolex etc. Armoured Aluminium cable)

Supply installation testing and commissioning of main switch board and bus bar DB 415V; 300AMp, 3-Phase with MCB, Timer auto ON/OFF, over voltagae protection. With all sources like man power and cosumables required for it. As per direction of Engineer in Charge.

Supply erection testing and commissioning of chemical earthing with all sources like man power and consumables required for it. As per the direction of Engineer in Charge.

Supply intallation testing and commissioning of GI Flat (50x6) mm for High Mast light poles, Main switch board/feeder pilar 415v, 100 Amp/ Bus bar distribution board 415V, 100 Amp and other equipment as required. With all sources like man power and consumables required for it. As per direction of Engineer in charge. i.e. 4.1 kg/mtr 140 Mtr x 4.1 Kg = 574 Kg

Supply & Fixing of Extra arm for of light 2m single arm

Installation testing and commissioning of the high mast and light fixture with the help of suitable tools and plant, wiring of luminaries with all wiring material like PVC insulated PVC sheathed flexible cable of suitable copper conductor lugs, MCB and all labour and construction of shallow foundation with M-25 grade concrete for the high mast considering safe soil bearing capacity of 10 T/mtr sq. for 20 mtr High Mast.

Laying of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of size not exceeding 35 sq. mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. With all sources like man power and cosumables required for it. As per direction of Engineer in Charge.

Sub-Total

GST @ 18% on Sub-Total

Total on Sl. No. 16 to 17

L.cess @1% on Total

Grand-Total (Total+L.cess)

Say Rs.

Amount in words:-

e-NIT No- 506/PR/JUSNL/2026-27

Name of the Firm/Company:-

PRICE SCHEDULE (DOMESTIC TENDERS - RATES ARE TO GIVEN IN RUPEES (INR) ONLY) (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevant columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #