REPAIRS TO FLOORING OF TOILETS INCLUDING SANITARY FITTINGS, SUNKEN FLOOR AND OTHER PLUMBING WORKS ETC FOR CERTAIN BUILDINGS IN VIMAN NAGAR AND CHANDAN NAGAR FOR SMQS AND OTMS UNDER AGE BR-II OF GE (AF) LOHEGAON AT AF STATION PUNE.

Amount

Demolition of cement concrete terrazo (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level), complete all as specified and directed.

Dismantling floor hearth and wall tiles including cement mortar bedding (but not backing) and removing from site complete all as specified and directed.

Taking down cement plaster on brick or stone wall including racking out joints hacking for key scrubbing down with the water etc, complete all as specified and directed.

M&L for nonskid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sq m but not exceeding 0.11 sqm in floors , set and jointed in neat cement slurry and pointed in colour cement to match the shade of tile over and including 15 mm thick screed bed in CM (1: 6) complete all specified and directed.

M& L 450x300x7mm thick glazed ceramic concept tile coloured on vertical surfaces such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick cement mortar rendering in CM 1:4 complete all as specified and directed.

M&L for Glazed ceramic tiles(400x400mm) x 7mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM (1: 6) complete all as specified and directed.

S&F 300x200x7mm thick glazed ceramic coloured tile on vertical surfaces such as skirting, dados, risers to steps etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile over and including 10 mm thick cement mortar rendering in CM 1:4 complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm gradded stone aggreggate as in levelling course of flooring complete all as specified and directed.

M&L for machine cut Kota stone slab flooring 20mm thick and over and incl 15mm thick screed bed in CM (1:6) cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding and mirror polishing 7 cut as per local trade practice and cut to shape of required size complete all as specified and directed.

M&L kota stone slab 20mm thick in riser of steps skirting, dado and pillar laid over cement screed and jointed including 10mm thick rendering in CM (1:4) complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate as in sub base of floor and path, complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone agg as in foundation filling and mass concrete complete all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed.

M&L for PCC 1:2: 4 or Bitumastic Gola with 80/25 bitumen and coarse sand mixer 1:3 by weight 8cm x8cm at the junction of roofing to vertical surface as in sunken or similar work complete all as specified and directed.

M&L for Bitumen blown any grade applied hot, two coats to concrete bedding surface @ 1.5Kg/Sqm per coat as in sunken floor complete all as specified and directed.

M&L for polythene film black 50 micron laid in sunken floor complete all as specified and directed.

M&L for 25mm thick PCC 1:1.5:3 tye A0 using 12.5mm graded stone agg as in sunken floor mixed with water roofing comound finished fair and even complete all as specified and as directed (Note:- WPC shall be measured and paid separately)

M&L for spout of 50mm bore PVC pipe and projection 450mm clear from outer wall in any length or description with rubber ring joints and fixed in sunken floor etc for drain out logging as in sunken floor etc or similar work complete all as specified and as directed

M&L for 75mm thick PCC in (1:2:4) type B2 using 20mm graded stone agg as in sunken floor complete all as specified and as directed

M&L for treating small articles such as stops, covers, gully gratings, holdfasts, ends of post, back of chowkhats etc with tar, coal tar black paint area exc 0.1 Sqm and n.exc 0.5 Sqm each complete all as specified and directed.

M&L for 25mm thick flush shutters, solid core construction with particle board core comercial type on both for cupboards sides complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, complete all as specified and directed.

S&F Curtain rod wih brackets of fancy type 20mm dia anodised aluminum alloy conduit pipe complete all as specified and directed.

M&L for 12mm thick pre-laminated particle board prelaminated both side with decorative choice lamination fixed with secrews to timber frame as in cupboard shelves complete all as specified and directed.

M&L for 2nd class hard wood plain fillets exc 13 and n.exc 25 sqcm, square, rectangular or triangular in section clean swan secured with nails or beads and fixed in repairs complete all as specified and directed.

M&L for hold fast made up of flats iron of size 25x3mm conforming to FE 290 Gde -E-165 complete all as specified and directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Taking up or down 15 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and as directed

Taking up or down 20 mm bore GI tubing and connection including cleaning for refixing or removal complete all as specified and as directed

Refixing old steel tubing and connection 15 mm bore in new or old position in wall, ceiling and floor etc complete all as specified and directed.

S&F 15mm medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc complete all as specified and directed.

Refixing old steel tubing and connection 20 mm bore in new or old position in wall, ceiling and floor etc complete all as specified and directed.

S&F 20mm medium grade GI steel tubing including all fittings and fixed complete to wall ,ceiling and laid in floor etc complete all as specified and directed.

S&F in repairs 15 mm dia stop cock of cast copper alloy but fancy type chromium plated screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union fixed complete all as specified and directed.

S&F swivel shower rose of PTMT any colour for fixed with 15mm bore GI pipe & 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms) complete all as specified and directed.

S&F in repairs Bib taps, fancy type CP cast copper alloy with crutch or butter fly handle , screwed down, or secrewed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Waste coupling of PTMT 32 or 40mm and min wt 45 or 60gms complete all as specified and directed.

S&F in repairs 10 ltr capacity PVC valve less symphonic action type flushing cistern, white ,with inlet ball valve, float and handle including bracket and 32 mm dia HDPE flush pipe and connected to squat pattern /pedestal pattern water closet (Flush shall be fixed at suitable height for smooth functioning ) complete all specified and directed.

S&F PVC connection 15mm bore with PTMT nuts and 750mm long complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white flat back size 550x400mm complete including necessary cutting for and pinning in ends of brackets ) including brackets and 750mm long PVC waste pipe 32mm bore & waste coupling 32mm dia of PTMT (half or full threaded) complete all as specified and directed.

S&F in repair vitreous china squatting pan `Orissa’ pattern, size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe) with ‘P’ or ‘S’ trap including provision of lime concrete bedding complete all specified and directed.

S&F 20 mm dia stop cock of copper alloy screwed down high presser with crutch or butter fly handle on both ends for iron pipe or for union fixed in repair complete all as specified and directed.

S&F 110mm bore PVC bends of any radius complete all as specified and directed.

S&F 75mm bore PVC SWR bends of any radius complete all as specified and directed.

S&F 75mm bore PVC (SWR) vent cowl, complete all as specified and directed.

S&F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed.

M&L for 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed

S&F 75mm PVC SWR pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F cast iron nahani trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 complete all as specified and directed.

Dismantling water tanks of capacity exc 250 and not exc 500 ltr and removing to store complete all as specified and directed.

S&F rotational moulded polyethylene cylindrical vertical with closed top water storage tank double layered 500 Ltr capacity, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection complete all as specified and directed.

M&L for 15mm thick rendering in CM (1:4) on external surfaces of brick work finished even and smooth without using extra cement, complete all as specified and directed.

M&L for 10mm thick rendering in CM (1:6) on internal surfaces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coat of cement base paint over a coat of cement primer complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of oil bound distemper over 1mm thick wall care putty on walls, complete all as specified and directed.

S&F Sink made of stainless steel 1mm thick kitchen or laboratory with plug washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 495x420mm bowl size 410x330x160mm complete all as specified and as directed

S&F Sink made of stainless steel with drainage board 1mm thick kitchen or laboratory with plug washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915x460mm bowl size 410x330x160mm complete all as specified and as directed

S&F in repair Vitreous China wash down water closet pan (padestal pattern) white excluding flushing cistern, fixing bolt and flush pipe and including seat cover complete all as specified and as diected

S&F in repair Vitreous China half stall urinals bowel type (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 secuing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement, fixing automatic flushing cistern with brackets flush pipe grating and union fo dischage pipe (excluding of fixing supply pipe to flushing cistern, trap) including waste pipe complete all as specified and directed.

S&F 100 mm Branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type or with parallel branches complete all as specified and as directed.

Ditto all as per Ser Item No 62.00 above but double complete all as specified and as directed

S&F 75 mm Branch pieces, single (equal or unequal) ordinary or inverted (Spigot or socket type or with parallel branches complete all as specified and as directed.

Ditto all as per Ser Item No 65.00 above but double complete all as specified and as directed

Taking down shutters of any description exc 1 sqm but n. exc 2 sqm each complete all as specified and directed.

S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F in repairs anodised Hasp and staple, safety type,brass with mild steel hinge pinincluding bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F 100 mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S&F 150mm Aluminum handle cast type anodized complete all as specified and directed.

RANJANA CONSTRUCTIONS

R k construction

N AND G CONSTRUCTION