Repairing of finishing works and misc items in Residence No. Sa-6 at Canal Colony, Cantt Road, Lucknow.

Amount

Dismantling existing plaster including disposal of refuse as directed by the Engineer- in- charge within a distance of 60 m.

Dismantling cement concrete or brick or granolithic floors, including base concrete and including stacking of dismentled materials as directed by the Engineer -in-charge with in a distance of 60m.

12mm cement plaster in single coat on rough side of single/ half brick wall for interior/ exterior plastering in singl;e storey building finished even & smooth 1 cement : 4 coarse sand including all L/M, T&P etc.

Cement Concrete flooring 1:2:4 (1 Cement : 2 Coarse Sand : 4 Graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc . Complete. 40mm thick with 20mm nominal size stone aggregate.

Providing and applying plaster of putty 2mm thickness over plasterd surface to prepare the surface even and smooth complete.

Scraping old white or colour wash including disposal of refuse as directed by Engineer- in- charge with in a distance of 60m.

One priming coat and two coat oil bound distemper including supply of all materials, labour and T&P etc.required for proper completion of work.

Painting or varnishing on iron work in small areas or new wood work with one coat of ready mixed priming paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials ,labour, T&P etc required for proper completion of work .(Paint to be used should conform to the ISI no -103-1950.)

Weather coat painting in two coat with antifungle exterior weather coat paint of approved brand after throughly brooming and preperation of surface complete in all respect.

Providing and placing on terrace (at all floor levels) polyethylene water strorege tank ISI:12701 marked with over and suitable locking arrangement an macking necessary holes for inlet, out let and over flow pipes but with out fittings and the base support for tank.500 Litr.

S/F 500 mm diameter C.I cover with out frame for Man holes.

P/F 20 mm G.I. Pipe Clss-B complete with fittings & Clamps, including cutting and making good the surface of walls etc. complete (internal works)

P/F stainless steel Kitchen sink with C.I.bracket excluding cost of other fitting.

P/F looking mirror of 900×450 mm size of approved make with teak wood moulded frame and 6mm thick hard board backing including cost of material ,labour and T&P etc.

P/F 580 mm size white glazed orissa pan Indian make of approved quality including cost of materials.

P/F 10 Ltr. low level PVC Cistern of standard approved make complete with all accessories and fitting.

P/F 100mm size "P" or "s" trap for water closet squatting pan including jointing the trap with the pan and pipe in cement mortar 1:1(1 Cement : fine sand)

P/F wash basin with single hole /number of of holes for pillar tap with C.I or M.S. brackets painted white including cutting hole & making god the same but excluding fittings.

P/F mosquito proof Iron wire mesh with necessary wooden beading and all M/L/T&P etc.

Providing and fixing 35 mm thick flush door shutters including ISI marked Stainless Steel but hinges with necessary screws ISI markedconforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:

P/F 15 mm dia G.I. pipes complete with G.I fittings and clamps, i/c cutting and making good the walls etc.

P/F 100 mm dia C.I pipe spigot & socket, soil waste drainage and ventilating pipes of the following nominal size (lead, chaulked joints to be measured and paid separately).

P/F 35 mm thick Second class teak wood glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second ClassTeak wood

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer 3 mm thick water proofing membrane, black finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/litre and viscocity 70-160 cps. Over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 650/450N/5cm. Tear strength in longitudinal and transverse direction as 300/250N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane : including the following works (a) For prepairing the surface Dismantling existing mortar/plaster over roof including disposal of refuse as directed by the Engineer-in-charge with in a distance of 60 meter. (b) 12mm cement plaster in sigle coat on top of slab in single storey building finished even & smooth 1 cement : 4 coarse sand including all L/M, T&P etc under the Laying of APP sheet . (C.) Providing and laying 40mm thick 1:2:4 cement coarse sand and stone ballast 6.7mm nominal size with Murga Jali including all material, Labour,T&P and curing complete over the APP sheet.

vajid ali

Pratap Narayan Mishra

m/s mohd. zamil