Special Repair works to the Electrical Installation to the existing Scientific Storage godown of 6000 MT Capacity in TNCSC Godown campus at Sriperumbhudur Taluk in Kanchipuram District

Supply and clamping of 3 x 1.5 Sq.mm PVC LTUG armoured copper cable on post or on wall with MS clamps.(for lights power supply) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and clamping of 3 x 2.5 Sq.mm PVC LTUG armoured copper cable on post or on wall with MS clamps.(for power supply purpose) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and clarnping of 3 x 4 sq.mm PVC LTUG armoured copper LTUG cable on post or on wall with MS Clamps etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure Distribution board 1No 32 Amps DB MCB as incoming and 6 Nos 6 Amps to 32 Amps SPMCB outgoing in flush with wall and making good of the concealed portion with earth connection only. The MCB DB and MCB's should be with ISI mark (Like Standard make) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 5A 3 pin and 2 pin combined flush type wall socket with 5A flush type switch on suitable TW box etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 5A/15A 3 pin combined flush type wall socket with 15A flush type switch on suitable TW box etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 25Amps Flush type wall socket 25A DP MCB complete set for AC plug in flush will wall with earth connection ( for AC plug)ISI make etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 3core of 2.5 sqmm FLEXIBLE COPPER CABLE of 1100V Grade with suitable connection from 25Amps DP Box to Godown inside Switch box etc complete (ISI make) etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of LED Flood Light 100W with Integrated Driver etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 48Watts LED street light fitting (higher End) complete with 32mm dia GI pipe (Class ‘B’) with 1 No 32mm GI bend complete on the Existing post or wall with PVC unsheathed copper leads MS clamps and etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 4 Feet LED 20W Fitting with LED 20W tube (Higher End) complete with TW round blocks on wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting etc., complete complying with standard specification and as directed by the departmental officer.

Supply of Power supply-Extension box,consist of 3 Nos. 5Amps (3 Pin and 2 Pin) socket with control switches,one Indicator in suitable TW Box covered with Hylem sheet, with 15Meter of 3core- 2.5Sq.mm copper wire of flat flexible cable wire and 5A-3pin top.The extension box with all inner-connections, flat cable wire connections with 3pin top also.The cost includes all materials cost,incidental charges,transportation charges and the materials of ISI make and as directed at site.(power supply provision for Weigh-Machine & bag-closing machine inside godown usage) etc., complete complying with standard specification and as directed by the departmental officer.

Earthing as per PWD standard with an earth Electrode of 2Mtr Class -B G.I pipe of dia not less than 32mm complete with necessary masonary work etc., complete complying with standard specification and as directed by the departmental officer.

Supply and run of 1 of No.8 SWG copper wire for earth connection etc., complete complying with standard specification and as directed by the departmental officer.

Supply and laying of 2 x 25 sq.mm sized PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 Mtr Putting 0.15mt layer of sand and covering the three sides of the cable with bricks and refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officer.

Supply and clarnping of 2 x 25sq.mm PVC LTUG armoured LTUG cable on post or on wall with MS Clamps etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of brass cable gland for 2 x 25 sqmm PVC armoured LTUG cable with earth connection etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of TNEB meter Board suitable for 32A Three Phase service connection with 3 Nos. 32A Fuse unit(500V) 32A neutral link and earth link (1" x 1/8" Copper flat) on TW plank of size 600mm x 450mm x 19mm withsupporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank onwall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1no-40A 30MA Four pole RCD/RCCD( Higher end) with suitable necessary connection etc., complete complying with standard specification and as directed by the departmental officer.

Supply and laying of 3 1/2 x 50 sq.mm sized PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 Mtr Putting 0.15mt layer of sand and covering the three sides of the cable with bricks and refilling the earth to make good etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of brass cable gland for 3 1/2 x 50 sqmm PVC armoured LTUG cable with earth connection etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of 63A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD Earthing etc., complete complying with standard specification and as directed by the departmental officer.

Supply and fixing of WT bulk head fitting with guard suitable with 7W / 9W LED bulb etc., complete complying with standard specification and as directed by the departmental officer

Supply, Fabrication, Commissioning and Testing of 50 Watts -LED-Solar-Off Grid - Street Light with Gi- Post .The cost includes material cost, transportation cost, masonry work cost, any escalation in GST-cost as arises, Fabrication charges for Street light Post, Electrical wiring with material cost and labour cost as required at site. The Solar PV panels and LED light fittings to be ISI make and to be satisfy to TEDA norms as directed by the departmental officers. Solar PV Module 12 Volt- 90 Watts - Mono- crystalline. The modules are designed to withstand highly corrosive atmosphere and heavy wind loads and of certified standards. Temperature of Operation should be of 10 to 50 degree Celsius with Thermal Management System for ambient temperature in lower & higher rated value. The controller to be MPPT.(ISI Make) Battery-Lithium Ferro Phosphate make and designed for tropical conditions and have a long life. Minimum Voltage - 12.8V, 42 AH capacity ( ISI make) LED Light- White Light Emitting Diode (W-LED) (ISI Make) 12 Watt, W-LED luminary, dispersed beam, soothing to eyes with the use of proper optics and diffuser.LED Chip is of compliance to IES: LM-80 (Approved Method for Measuring Lumen Maintenance of LED Light Sources and LED lumen depreciation time to L70). Test report to be submitted before installation and to be get approval from Departmental Officers. The Color Temperature to be between 5500 K to 6500 K. The Die cast Aluminium IP66 enclosure provides excellent Protection against water entry, dust and humidity. Street light Post:- GI- Class-B (ISI norms) Pole height 6.5 m above the ground level. The G.I post must with 300mm x 300mm x 6mm MS base plate duly welded at the bottom and with concreting and construction on masonry pedestal.