Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹2.0 L
Closing Date
12 Jan 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
43 conditions · 9 needing a document upload
Please furnish documents in support of your claim to fulfil the eligibility criteria as mentioned in tender documents. Each page of copy of documents/ certificates in support of credential, submitted by you shall be self attested/digitally signed by the you or authorized representative of your firm. Only those documents which are declared explicitly by you as "documents supporting the claim of qualifying the laid down eligibility criteria" will be considered for evaluating the offer or otherwise available in the offer.
No deviation shall be accepted, in case of deviation in any term and condition in tender documents offer will summarily be rejected.
Requisite documents proving technical eligibility criteria and technical eligibility criteria have been uploaded along with those required as per explanation given in clause 10 of IRGCC-2022 (Works matter).
All requisite valid documents regarding constitution of business of the bidding firm should be submitted along with the tender as per clause 14 of IRGCC-2022 (Works matter), otherwise their offer will be considered incomplete and shall not be considered.
The tenderer whether sole proprietor / a company or a partnership firm / joint venture (JV) / registered society / registered trust / HUF / LLP etc if they want to act through agent or individual partner(s), should submit along with the tender, a copy of power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, specifically authorizing him/them to sign the tender, submit the tender and further to deal with the Tender/ Contract up to the stage of signing the agreement except in case where such specific person is authorized for above purposes through a provision made in the partnership deed / Memorandum of Understanding / Article of Association /Board resolution, failing which tender shall be summarily rejected. A separate power of attorney duly stamped and authenticated by a Notary Public or by Magistrate in favour of the specific person whether he/they be partner(s) of the firm or any other person, shall be submitted after award of work, specifically authorizing him/them to deal with all other contractual activities subsequent to signing of agreement, if required. Note: A Power of Attorney executed and issued overseas, the document will also have to be legalized by the Indian Embassy and notarized in the jurisdiction where the Power of Attorney is being issued. However, the Power of Attorney provided by Bidders from countries that have signed the Hague Legislation Convention 1961 are not required to be legalized by the Indian Embassy if it carries a conforming Appostille certificate. Reference: para 15 of IRGCC-2022 (Works matter),otherwise their offer will be considered incomplete and shall not be considered.
Partnership firm, if applicable in the instant tender, should submit all valid requisite documents and full fill the stipulations as per clause 18 of IRGCC-2022 (works matter), otherwise their offer will be considered incomplete and shall not be considered.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please submit your Bank details of the firm /individual/JV/partnership etc. i.e. Name of the Bank along with Bank Branch code, account No., IFSC Code, PAN Number and other necessary & relevant documents.
Tenderers are advised to visit the site of work to ascertain all aspects of the site conditions viz accessibility, availability of approach road, nature of the soil, availability of material, availability of labour etc. that may be encountered in course of execution of work.
Tenderer should see the website for the corrigendum/addendum to the NIT/tender document, if any that may be uploaded prior to tender opening (inclusive) as there will not be any separate communication for that.
The tenderer for carrying any construction work in Uttar Pradesh must get themselves registered from the registering Officer under Section - 7 of the Building and Other Construction Workers Act, 1996 and rules made there-to by the Uttar Pradesh Govt. and submit certificate of Registration (Labour Department). For enactment of this Act, the tenderer shall be required to pay cess @ 1% of cost of construction work to be deducted from each bill.
The contractor(s) shall observe all the formalities, perform all the acts and abide by all the provisions contained in the Contract Labour Act-1970 and Contract Labour Central Rules, 1971 which in addition to other stipulations provides that the contractor(s) shall obtain license(s) from appropriate licensing officer of the area before commencement of the work and shall produce a copy thereof along with the original to the Railway office, which will be returned to the contractor after verification.
If any complaint is received against the contractor regarding violation of contract laws, (exposing Principal Employer to the risk of legal proceedings under labour laws), the guilty contractor will be black listed and their contract shall be terminated following the due procedure, apart from initiating criminal proceedings against him with the help of Labour department officials. (Authority: RB letter no.2008/E (LI)/AT/CNR/3, dated 24.01.2018).
The tenderer has to submit necessary documents in compliance of clause 10 to 18 (Part-I) of IRGCC 2022 (Works matter) mandatorily, otherwise offer will be considered as Incomplete Offer and accordingly shall not be considered.
It is the responsibility of the tenderer to see corrigendum, if any, to tender notice up to the date of tender opening. IRGCC-2022 (works matter) is for reference only. Any correction issued by competent authority up to date of opening will be applicable. Tenderer should quote accordingly.
Railways reserves the right to accept or reject any or all the tenders and to award the work in whole or in part without assigning the reason for any such action.
It is to be noted that tenderer digital signature on the E-Tender form will be considered as confirmation that tenderer have read and accepted all the conditions laid down in the documents as well as related specification of items, schedule & quantity of items in the tender, consisting of techno-commercial offer form (including special conditions attached to E-Tender) and Financial offer form.
The quantities shown in the attached Schedule are given as a guide and are approximate only and are as a guide to give the tenderer(s) an idea of quantum of work involved. Quantities are subject to variation according to the needs of the Railway. The Railway does not guarantee work under each item of the Schedule. The Railway reserves the right to increase/ decrease and/or delete or include any of the quantities given above and no extra rate will be allowed on this account.
In case of any information submitted by tenderer is found to be false forged or incorrect at any time during process for evaluation of tenders, it shall lead to forfeiture of the tender Earnest Money Deposit besides banning of business for a period of upto five years. In case of any information submitted by tenderer is found to be false forged or incorrect after the award of contract, the contract shall be terminated. Earnest Money Deposit (EMD), Performance Guarantee and Security Deposit available with the railway shall be forfeited. In addition, other dues of the contractor, if any, under this contract shall be forfeited and agency shall be banned for doing business for a period of upto five years.
Opening of e-tender online:- The e-tenders will be opened online using the IREPS portal. No representative is required to be present for opening of tender and taking notes of rates quoted and ranking as the complete details of rates etc. of all the bidders shall be available to the bidders in the website after the opening of the tender.
In case the date of closing mentioned in the Notice Inviting Tender is declared a holiday/bandh/strike etc. on any account, the date of closing tender online will not be changed as the application in the website of IREPS does not permit submission of any offer after closing date and time of the tender. However, opening of tenders online will be on any convenient day after the closing date/time of tenders.
All the bidders / tenderers should ensure that they are GST compliant and their quoted tax structure / rates are as per GST Law ( Ref - Railway Board letter No.2008/RS(G)/777/1 Dated - 29/5/2017 )
GCC 2022 for works Contract
The Bid Security shall be deposited either in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure-VIA and shall be valid for a period of 90days beyond the bid validity period. In case, submission of Bid Security in the form of Bank Guarantee, following shall be ensured: i. A scanned copy of the Bank Guarantee shall be uploaded on e-Procurement Portal (IREPS) while applying to the tender. ii. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids. iii. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. iv. The Tender Security shall remain valid for a period of 90 days beyond the validity period for the Tender. v. The details of the BG, physically submitted should match with the details available in the scanned copy and the data entered during bid submission time, failing which the bid will be rejected. vi. The Bank Guarantee shall be placed in an envelope, which shall be sealed. The envelope shall clearly bear the identification "Bid for the ***** Project" and shall clearly indicate the name and address of the Bidder. In addition, the Bid Due Date should be indicated on the right hand top corner of the envelope. vii. The envelope shall be addressed to Sr.DEE/G/PRYJ, DRM office Nawab Yusuf Road, Prayagraj-211001. viii. If the envelope is not sealed and marked as instructed above, the Railway assumes no responsibility for the misplacement or premature opening of the contents of the Bid submitted and consequent losses, if any, suffered by the Bidder.
Electrical work in connection with the work of "Subedarganj-Provision of additional parking shed, extension of portico, pathway & other associated work at NCR/HQ office campus".Electrical/G work due to construction of ROB in lieu of Lc no. 18-C between prayagraj to DDU section in Prayagraj Division. Electrical work in connection with "Provision of C&W offices at PF No. 1,2,3 & 5 of SFG Railway Station". Electrical work in connection with the work of "Raising of Platform no. 1 & 2/3 to high level for recoupment of shortfall in Minimum Essential Amenities (MEA) at RUB stn under ADEN/FTP."
ELG-133-2526~NCR
ELG-133-2526
Open
Works - General
6 Months
Prayagraj, Uttar Pradesh
₹0
₹2.0 L
12 Jan 2026
20 Dec 2025
29 Dec 2025
100 items across 1 schedule · ₹98,42,090.53 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. 2 x 4 sq. mm+ 1 x 4 sq. mm earth wire. | Metre | 400.00 | 192.37 | 76,948 |
| 2 | Wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. 2 x 6 sq. mm+ 1 x 6 sq. mm earth wire. | Metre | 300.00 | 236.04 | 70,812 |
| 3 | Wiring for circuit / sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/recessed PVC conduit as required. 2 x 10 sq. mm+ 1 x 10 sq. mm earth wire. | Metre | 300.00 | 571.28 | 1,71,384 |
| 4 | Wiring for light/power plug with 2x4 sq.mm FRLS PVC insulated copper conductor single core cable insurface/recessed medium class PVC conduit, along with 1 No. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. | Set | 300.00 | 204.46 | 61,338 |
| 5 | Supply and recessing/fixing of PVC Conduit pipe 25 mm (Medium) conforming to IS 9537/ Part III/1983 (Latest version) with accessories,junction box, etc including making chase, plastering/ clamping etc as per technical specifications. | Metre | 1300.00 | 47.22 | 61,386 |
| 6 | Supply of PVC insulated multi stranded copper conductor single core FRLSH cable 2.5 Sq. mm conforming to IS: 694 (latest version), and drawing in laid (recessed /surface) PVC conduit pipe for wiring of point wiring/ circuit wiring/sub main/ Main as required as per technical specification including connections, testing and commissioning. | Metre | 1300.00 | 23.55 | 30,615 |
| 7 | Supply of PVC insulated multi stranded copper conductor single core FRLSH cable 4.0 Sq. mm conforming to IS: 694(latest version), and drawing in laid (recessed /surface) PVC conduit pipe for wiring of point wiring/ circuit wiring/sub main/ Main as required as per technical specification including connections, testing and commissioning. | Metre | 1300.00 | 36.37 | 47,281 |
| 8 | Supply of PVC insulated multi stranded copper conductor single core FRLSH cable 6.0 Sq. mm conforming to IS: 694 (latest version), and drawing in laid (recessed /surface) PVC conduit pipe for wiring of point wiring/ circuit wiring/sub main/ Main as required as per technical specification including connections, testing and commissioning. | Metre | 900.00 | 50.19 | 45,171 |
| 9 | Supply of PVC insulated multi stranded copper conductor single core HRFR cable 1.5 Sq. mm conforming to IS: 694 (latest version), and drawing in laid (recessed /surface) PVC conduit pipe for Earth wire as required as per technical specification including connections, testing and commissioning. | Metre | 1600.00 | 15.22 | 24,352 |
| 10 | Supply, Erection, Testing and Commissioning of following Modular Type switch 10 A (1-way) complete in all respect. Inspection by- Consignee. | Numbers | 40.00 | 60.26 | 2,410.4 |
| 11 | Supply, Erection, Testing and Commissioning of following Modular type Plug socket outlet 2/3 Pin 10 A complete in all respect. Inspection by- Consignee. | Numbers | 32.00 | 99.63 | 3,188.16 |
| 12 | Supply, Erection, Testing and Commissioning of following Modular Type switch 20 A (1-way) complete in all respect.Inspection by- Consignee. | Metre | 21.00 | 132.59 | 2,784.39 |
| 13 | Supply, Erection, Testing and Commissioning of following Modular type Plug socket outlet 5/3 Pin 20 A complete in all respect.Inspection by- Consignee. | Numbers | 21.00 | 153.37 | 3,220.77 |
| 14 | Supply and Erection of Modular type switch blanking set to fill the blank space White finished mounting cover plate complete in all respect.Inspection by- Consignee. | Numbers | 32.00 | 7.29 | 233.28 |
| 15 | Supply and Erection of Junction Box cover POP type complete in all respect including hardware material for fixing. Inspection by- Consignee. | Numbers | 52.00 | 5.23 | 271.96 |
| 16 | Supply and Erection of white finish single mounting cover plate with base frame suitable 3 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring. Inspection by- Consignee. | Numbers | 34.00 | 69.33 | 2,357.22 |
| 17 | Supply and Erection of white finish single mounting cover plate with base frame suitable 8 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring. Inspection by- Consignee. | Numbers | 21.00 | 146.45 | 3,075.45 |
| 18 | Supply and Erection of white finish single mounting cover plate with base frame suitable 12 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring. Inspection by-Consignee. | Numbers | 10.00 | 211.44 | 2,114.4 |
| 19 | Supply and Erection of Modular Metal boxes concealed Boards suitable for mounting of 3 module white finish single mounting cover plate with Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes are to be concealed in wall. Inspection by- Consignee. | Numbers | 32.00 | 45.48 | 1,455.36 |
| 20 | Supply and Erection of Modular Metal boxes concealed Boards suitable for mounting of 8 module white finish single mounting cover plate with Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes are to be concealed in wall. Inspection by- Consignee. | Numbers | 31.00 | 79.73 | 2,471.63 |
| 21 | Supply and Erection of Modular Metal boxes concealed Boards suitable for mounting of 12 module white finish single mounting cover plate with Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes are to be concealed in wall. Inspection by-Consignee. | Numbers | 10.00 | 128.24 | 1,282.4 |
| 22 | Supply and Installation of Ceiling rose 3 plate as per IS No. 371/1999 (Latest Version) including connections, Testing and commissioning as per Tech. Specification. Inspection by- Consignee. | Numbers | 150.00 | 15.12 | 2,268 |
| 23 | Fabrication, Supply and Fixing of Fan Hook with clamp duly painted madeof 50x6 mm MS Flat with nut bolts suitable to fix on PP shelter bracing angle as required. Inspection by-Consignee. | Numbers | 40.00 | 103.72 | 4,148.8 |
| 24 | Supply, Erection, Testing and Commissioning of following Modular type step type Electronic Fan Regulator complete in all respect. Inspection by-Consignee. | Numbers | 20.00 | 207.98 | 4,159.6 |
| 25 | Supply and Erection of Fan Box cover POP type complete in all respect including hardware material for fixing. Inspection by-Consignee. | Numbers | 50.00 | 10.26 | 513 |
| 26 | Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. Inspection by- Consignee. | Numbers | 104.00 | 2,208.91 | 2,29,726.64 |
| 27 | Supply and recessing/fixing on surface of 6 SWG GI wire conforming to IS: 280/2006 (Latest Version) for loop earthing as required for earthing of installation as per IE Rule. | Numbers | 1400.00 | 9.54 | 13,356 |
| 28 | Termination of LT XLPE cables of various sizes (One Job means all 4 cores of cables). Inspection by- Consignee. | Numbers | 82.00 | 116.96 | 9,590.72 |
| 29 | Supply and laying of B class, 50 mm dia, GI pipe of for cable riser/road crossing as required and as per relevant technical specification. Inspection by- Consignee. | Numbers | 160.00 | 121.37 | 19,419.2 |
| 30 | Collecting, Transporting from SSE/PS/ store to site, laying, testing, and commissioning of above LT cable . Laying direct in ground (Including excavation, sand cushioning, protection brick covering and refilling the trench etc.), direct in RCC/Metal pipes in rod/track crossings and on surface/required in wall/in concrete floor by cutting recessed and finished originally as required as per relevant technical specifications. | Numbers | 7200.00 | 63.91 | 4,60,152 |
| 31 | Supply, replacement, fixing, testing, connecting and commissioning of 120 Watt or above LED flood light fittings as per IS:10322. LED Luminaries:-(1) Acomplete LED lighting unit consisting of a light source and Potted driver to gether with parts of distribute lights,to position and protect the light source,and to connect the light source to a branch circuit.The light source itself may be an LED array and LED module,or an LED lamp.(2):-Supplied LED luminaries shall confirm to IS:16101(2012) IS :16106(2012).Light Source(LED) in the Luminaries should be of make:-(1):-NICHIA/ CREE/OSRAM/ SEOUL/PHILIPS/ LUMILEDS /LEDNIUM. (2):-LEDs to IS:16105 (2012). IS:16108(2012), IEC:62471. Type LED:- High power LED, SMD (Surface Mounting device)/COB (Clip on board). 1.Input operating voltage :-105- 295 V AC.2:- Normal Voltage-220VAC,3.Driver type: constant current driver with short circuit protection. 4.LED life:- >50000 burning hours. 5.Depreciation:- 30% max. after 50000 burning hours. 6.Control of distribution:-Full cut off. 7.Surge protection: 4KV. 8.Drive component:Industrial grade only. 9.Efficiency of driver electronic: > 85%. 10.Beam angle:>=140 degree along with road and >=80 degree across theroad. 11.Colour temperature:5000-6500K. 12.Colour rendering index(CRI):>=75. 13.Ingress protection:IP-66.14.Lumen output: >120 lumens/watt. 15.Power factor:->0.95. 16.Total harmonics distortion (THD):-<15%. 17. Lamp cover: Toughened glass or UV stabilsed polycarbonate. 18.Finishing: Power coated/Anodized. 19.Secondry optics:poly carbonate reflector/ poly carbonates lens. 20.Construction of housing: extruded aluminum/CRCA/Pressure diecast aluminum. 21.Mounting:Suitable for existing pole/Truss/Lantern mounted. 22.Certificate:Firm tosubmit LM80 (In respect of LED used) & LM79 (Inrespect of luminaire used) test certificate from National/International accredited Laboratory and OEM certificate for compliance of BIS/IEC. 23.Warranty:Firm to submit warranty certificate for five year along with the supply. Allfittings shall be fitted with new suitable bend/elbow with clamp and proper nut and bolt and connection with twisted twin flexible cord of minimum size 16/1mm copper conductor as per relevant technicalspecification. Materials paraMtrs.s must remain unchanged during entire warranty period. Inspection by- Consignee. | Numbers | 20.00 | 6,128.43 | 1,22,568.6 |
| 32 | Supply, fixing, testing, connecting and commissioning of 300 mm sweep Exhaust Fan suitable for 230 volts, 50 Hz AC supply, 1400 RPM heavy duty with wiring and flexible PVC pipe as required. Inspection by- Consignee. | Numbers | 2.00 | 1,565.53 | 3,131.06 |
| 33 | Supply, replacement, fixing, testing, connecting and commissioning of energy efficient luminaries complete with all accessries of capacity 18/20 watt, 4 feet length, T8 LED lamps with sutable current control driver circuit ,suitable for surface/recessed mounting.LED Luminaries:-(1) A complete LED lighting unit consisting of a light source and potted driver together with parts of distribute light,to position and protect the light source,and to connect the light source to a branch circuit.The light source itself may be an LED array and LED module, or an LED lamp. (2):-Supplied LED luminaries shall confirm to IS:16101(2012) IS :16106(2012) .Light Source (LED) in the Luminaries should be of make:- (1):- NICHIA/ CREE/OSRAM/ SEOUL/ PHILIPS/LUMILEDS /LEDNIUM. (2):-LEDs to IS: 16105(2012). IS:16108(2012), IEC:62471.1.Input operating voltage :-105-295 V AC. 2:-Normal Voltage-220V AC.3.Driver type: constant current driver with short circuit protection(For tube light). 4.Control of distribution:-Full cut off. 5.Drive component :Industrial grade only .6.Efficiency of driver electronic: > 85% (For tube light).7.Colour temperature:5000-6500K(For tube light). 8.Colour rendering index(CRI):>75(For tube light). 9.Ingress protection :IP-20. 10.Lumen output: >100 lumens/[email protected] drive current(For tube light). 11.Power factor:- >0.90(For tube light). 12.Total hormonics distrotion(THD):-<20% (For tube light). 13. Lamp cover :Acrylic cover which does not result in loss of lumens. 14. Finishing:Power coated /Anodized. 15.Secondry optics:poly corbonate reflector/ poly carbonate lens. 16. Construction of housing: extruded aluminum/CRCA/Pressure die cast aluminum. 17.Mounting :Suitable for surface mounting/recessed mounting. 18. Certificate: Firm to submit LM80(In respect of LED used) & LM79 (In respect of luminare used) test certificate from National/International accredited Laboratory and OEM certificate for complience of BIS/IEC. 19.Warranty:Firm to submit warranty certificate for five year along with the supply.All fittings shall be fitted as surface mounting/recessed mounting with twisted twin flexible cord of minimum size 16/0.2 mm copper conductor as per relevant technical specification. Materials praMtrs.s must remain unchanged during entire warranty period. 1x18/20 watt. Inspection by- Consignee. | Numbers | 280.00 | 313.49 | 87,777.2 |
| 34 | Supply, erection, testing and commissioning of One phase distribution board comprising of one no. 32/40 amps DP MCB with 40 A ELCB/RCCB as incoming and 4 nos. 10 amps SP MCB , 4 nos. 20 A SP MCB as outgoing complete with copper bus bars, neutral link and other accessories housed in CRCA sheet enclosure with double door type. Inspection by- Consignee. | Numbers | 24.00 | 3,335.24 | 80,045.76 |
| 35 | Drilling of bituminous road/track and laying charges of cable in road crossing for laying 110 mm dia HDPE pipe through it. | Numbers | 2800.00 | 274.81 | 7,69,468 |
| 36 | Excavation of cable duct by horizontal boring method 1.4 to 2.1 mtr depths from the bottom of sleeper for trench less track crossing and laying of 120 mm outer dia. DWC pipe. The work shall be done as per extent practice and instruction of site engineer. It includes supply of DWC/DHPE pipes conforming to IS : 14930 (Part 2, 2001). | Numbers | 250.00 | 1,440.41 | 3,60,102.5 |
| 37 | Supply and laying of HDPE Pipes (Upto PN 8.0 Pressure Rating Material Grade: PE 63, Pressure Rating: PN 8.0, Nominal Dia(mm): 110) as per IS-4984:2016 suitable for HT/LT XLPE cable & as required and as per relevant technical specification. Inspection by- RITES. | Numbers | 2800.00 | 247.32 | 6,92,496 |
| 38 | Supply of heavy duty aluminium stool type folding ladder having "C" shapes section of size 16"x12" on top suitable for height upto 12 feet complete approved make design no. AL-201/8818 (heavy duty) or equivalent. Inspection by- Consignee. | Numbers | 2.00 | 10,869.09 | 21,738.18 |
| 39 | Supply, laying, fixing, testing and commissioning of 10.0 sq mm FRLS, PVC insulated multi stranded copper conductor single core cable 1100 Volts confirming to IS-694 (latest version) of approved make in the existing PVC conduit for wiring of point wiring/circuit wiring/sub main/main as per Tech Spec-I attached, IS & IE rules. | Numbers | 800.00 | 70.63 | 56,504 |
| 40 | Design, Manufacturing, Supply, Erection,testing and commissioning of LT switch gear panel board of 02mm Tk. Dia pressed CRS steel sheet panel shall be treated for anticorrosion treatment and finishedwithsmoke gray paint as per technicalspecificationno. Sr.DEE/G/ALD/Panel-94/113 Comprising withasunder:- ........MCCB of 400 A, 36 kAStandardbreaking capacity, 415 volt, 3Phase 4 Pole currentrating 400Amp. | Numbers | 1.00 | 12,548.52 | 12,548.52 |
| 41 | MCCB of 250 A, 36 kA Standard breakingcapacity,415 volt, 3 Phase 4 Pole currentrating 250 Amp. | Numbers | 5.00 | 10,779.46 | 53,897.3 |
| 42 | MCCB of 125A, 36 kA Standard breakingcapacity,415 volt, 3 Phase 4 Polecurrentrating 125 Amp. | Numbers | 8.00 | 6,568.96 | 52,551.68 |
| 43 | MCCB of 63A, 36 kA Standard breakingcapacity,415 volt, 3 Phase 4 Pole currentrating 63 Amp. | Numbers | 5.00 | 3,184.81 | 15,924.05 |
| 44 | "Supply, fixing, testing, connectingandcommissioning of Outgoing/FeederPanelMounted Multi-function Mtrs. withAccuracyClass 1 as per IEC 62053-21 or Class0.5,0.5S as per IEC 62053-22.LED Mtrs. Cl 1withRS485: Mtrs. should have followingfeatures built-inLED • Flush mounting 96 x96 mm • True RMSmeasurement •Password protection provision forsecurity •Site selectable for 3 Phase 4 wire, 3Phase3 wire, 1 Phase, CT Secondary1A/5A,Universal Auxiliary Supply 80-300VAC/DC,Input Voltage Measurement 50-500VAC,64 samples/ cycle The Mtrs. should be abletoread/display following paraMtrs.sInstantaneousParaMtrs.s (V1, V2, V3,V12, V23, V31, Avg (VLN, VLL), A1, A2,A3, Aavg, F, PF-1, PF-2, PF-3, PF(Avg) W1,W2, W3, W (total) VA1, VA2, VA3,VA(total) Cumulative ParaMtrs.s (Import Wh,ImportVah, Import load hours, Reset (old)CumulativeparaMtrs.s (Import Wh, Importload hours,Communication (RS485 ModusRTU). complete with all accessories. | Numbers | 18.00 | 2,557.48 | 46,034.64 |
| 45 | Supply of Indicator lamps with suitable holder. | Numbers | 57.00 | 81.28 | 4,632.96 |
| 46 | Fabrication works and insulated Aluminumbus barsof 800A capacity for phases &800A capacity forneutral Bus bar shall besuitably insulated with heatshrinkablesleeves/ epoxy coating/insulating taptowithstand the test voltage of 2.5 KVCopper stripfor connection outgoing aswell as incoming withsuitable size beprovided. Inspection by- Consignee for item no 40 to 46 due to LT panel. | Numbers | 1.00 | 45,718.92 | 45,718.92 |
| 47 | Supply erection, testing & commissioning of basic Earthing Kit 1set as per RDSO spec. No RDSO/PE/SPEC /PS/0109(REV.0)-2008, Amendment '1' or latest specification. | Numbers | 19.00 | 12,665.01 | 2,40,635.19 |
| 48 | Supply, fixing, testing and commissioning of wall mounted/recessed LT Double door 4Way distribution board made up of steel sheet, phosphatised powder painted complete with neutral link, earth point, Din rail and prewired with following items to be fixed in distribution board and site requirement. Inspection by-Consignee. | Numbers | 18.00 | 329.86 | 5,937.48 |
| 49 | Supply, fixing, testing and commissioning of wall mounted/recessed LT Double door 6Way distribution board made up of steel sheet, phosphatised powder painted complete with neutral link, earth point, Din rail and prewired with following items to be fixed in distribution board and site requirement. Inspection by-Consignee. | Numbers | 18.00 | 498.08 | 8,965.44 |
| 50 | Supply, fixing, testing and commissioning of DP RCBO's 10 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2,IEC-61009-1 or latest. Inspection by- Consignee. | Numbers | 68.00 | 2,520.12 | 1,71,368.16 |
| 51 | Supply, fixing, testing and commissioning of DP RCBO's 16 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2,IEC-61009-1 or latest. Inspection by- Consignee. | Numbers | 38.00 | 2,520.12 | 95,764.56 |
| 52 | Supply, fixing, testing and commissioning of DP RCBO's 20 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2, IEC-61009-1 or latest. Inspection by- Consignee. | Numbers | 20.00 | 2,520.12 | 50,402.4 |
| 53 | Supply, fixing, testing and commissioning of DP RCBO's 25 (2P, 30 mA) Amp outgoing confirming to IS: 12640-2, IEC-61009-1 or latest. Inspection by- Consignee. | Numbers | 19.00 | 2,520.12 | 47,882.28 |
| 54 | Supply, fixing, testing & commissioning of Ventilating fan 15 watt (Explanatory note attached). Inspection by- Consignee. | Numbers | 5.00 | 5,212.49 | 26,062.45 |
| 55 | Supply, fixing, testing and commissioning of 250 mm sweep fresh air fan complete and conforming to Explanatory Note. Inspection by-Consignee. | Numbers | 9.00 | 1,041.12 | 9,370.08 |
| 56 | Supply, fixing, testing & commissioning of 18 Watt LED Octane + LED Panel Square Light, 6500 K Slim, Compact, Aluminum die cast edge lit panel, Recess mounted square fixture with opal diffuser and separate electronic driver. Ceiling cutout (210 X 210) mm, Height 23 mm +-1 mm. Inspection by- Consignee. | Numbers | 12.00 | 1,410 | 16,920 |
| 57 | Supply, fixing, testing and commissioning of LED down lighter, housing aluminum die cast, white powder coated and PMMA diffuser having system wattage equal to 15-18 Watt complete with all mounting arrangement, accessories complete of approved make conforming to CEE/NR's spec. No. CEE/NR/121- lect/PS/2018 (Rev- '3') or latest at Tech Spec-III attached & PCEE/NR's spec. No. PCEE/NR/121- Elect/PS/2019 (Rev- '4') at Tech Spec-IV attached or latest. Inspection by- Consignee. | Numbers | 40.00 | 623.59 | 24,943.6 |
| 58 | Supply, erection, testing and commissioning of single earth electrode of 50 mm. dia 4000mm long GI pipe class B complete with earth box with CI cover hinged to CI frame including connection from earth electrode to MDB/SDB/poles/with 8 swg GI wire/strip as per attached drawing. Inspection by-Consignee. | Numbers | 60.00 | 2,563.18 | 1,53,790.8 |
| 59 | Supply, fixing, testing and commissioning of wall mounted LT distribution board made up of steel sheet, phosphatised powder painted complete with neutral link,earth point, Din rail and prewired confirming to IS:13032 & 8623:1991 with following items to be fixed in distribution board, confirming to IS:8828 :1996 orlatest, IE rules and site requirement. 4P, MCCB 125 Amps. 10 kA 'C' series= 01 No.(Incoming) DP RCCB (40 & 63 Amps., two nos. each) 10 kA 'C' series = 04 Nos. (Outgoing). Inspection by- Consignee. | Numbers | 1.00 | 20,340.53 | 20,340.53 |
| 60 | Supply, fixing, testing and commissioning of wall mounted LT distribution board made up of steel sheet, phosphatised powder painted complete with neutral link,earth point, Din rail and prewired confirming to IS:13032 & 8623:1991 with following items to be fixed in distribution board, confirming to IS:8828 :1996 orlatest, IE rules and site requirement. 4P, MCCB 125 Amps. 10 kA 'C' series= 01 No.(Incoming) DP RCCB (25, 40 Amps., three nos. each) 10 kA 'C' series = 06 Nos. (Outgoing). Inspection by-Consignee. | Numbers | 1.00 | 25,425.66 | 25,425.66 |
| 61 | "Supply, installation, testing and commissioning of Heritage design type cast iron/mild steel pole, grooved, of 4 Meters height with designer bracket 2 sided made of mild steel-cast iron- Cast Aluminium, Cast Aluminium lighting fixture with LED Bulb 36W/40W and EDPM rubber gasket, Cast iron embellishments, stainless steel screw, IP 66, translucent Acrylic diffuser/Poly carbonate diffuser, corrosion and UV ray resistant coating including foundation and related arrangements. Design to be approved by Railways. Inspection by-RITES. | Numbers | 40.00 | 34,459.58 | 13,78,383.2 |
| 62 | Supply and erection with proper foundation Victoriya bollards are decorative cost iron ornamental bollards with medium pumkins. The bollards are painted with black PU paint 18 to 26 watt retrofit LED lamp. Inspection by- Consignee. | Numbers | 40.00 | 3,983.26 | 1,59,330.4 |
| 63 | Shifting of the high mast from one place to other place and installation and commisioning of this High mast including foundation other necessory items which required for commisioning of the high mast. | Numbers | 1.00 | 1,28,410.12 | 1,28,410.12 |
| 64 | Supply, fixing, testing,connecting and commissioningof storage type water coolersimilar to Model SDLX 100,Cooling Capacity-170 litre perhour, 380/400 litre Storage with foundation/platform & cage.Inspection by-Consignee. | Numbers | 4.00 | 63,725.71 | 2,54,902.84 |
| 65 | Supply, fixing, testing andcommissioning of 380 mmsweep, 1400 rpm (approx)propeller type exhaust fancomplete as per IS, IE rule &site requirement conforming toIS Specification. Inspection by-Consignee. | Numbers | 4.00 | 3,265.19 | 13,060.76 |
| 66 | "Design ,fabrication , supplyand fixing of GI perforated horizontal cable- tray with all connected accessories viz-bend, tree, cross, reducer, 45 °horizontal bend, coupler plates etc. including painting besidesclamping, shifting of existing cables into the trenches alongwith tagging and labling ofshifted cables with numberingsleeves fot easy identification.size 300 mm width , 100 mmdepth, 2 mm thickness."Inspection by-Consignee. | Metre | 30.00 | 1,016.52 | 30,495.6 |
| 67 | Supply, fabricating and installing of G.I.perforated type cables trays with perforation not more than 17.5%)including suspending from ceiling with MSangle, rods connection pieces, (L pieces, T pieces, 90/45 degree any other fitting required) G.I. nutbolts, G.I. washers,fasteners etc.complete in all respects required at site andas per PCEE/NR specification at Tech Spec-I. 150 mmwide, 50mm depth 2mm thick with protective cover. Inspection by- Consignee. | Metre | 200.00 | 1,438.28 | 2,87,656 |
| 68 | Supply, fixing, testing,connecting and commissioningof wall mounted Bracket Fanincluding supply of M.S. fixing clamps & its hardware withflexible copper cable twintwisted size 24/0.20 01 mtrlong for each fittings asrequired. Inspection by- Consignee. | Numbers | 20.00 | 1,784.96 | 35,699.2 |
| 69 | Supply, installation, testing,connecting and commissioningof LED base name board ofdifferent stations (01 setincludes 01 No Hindi, 01 NoEnglish & 01 No Urdu nameboard) with power LEDs,Drivers & wiring of board. Thesignage board should havealphabet of vertical peak heightof 600 mm and proportionatehorizontal span. Approximatesize of Hindi, English signagepanel shall have Length 6400mm, Height- 912 mm. Note -01 set includes, a. Hindi board01 No, b. English board 01 No,c. Urdu board 01 No. Inspection by-Consignee. | Numbers | 1.00 | 2,41,999.71 | 2,41,999.71 |
| 70 | Supply, fixing, testing and commissioning of surface mounted/flush type power unit complete with 4 modular plate, 25 A MCB, starter, plug & socket for AC. Inspection by-Consignee. | Numbers | 20.00 | 606.83 | 12,136.6 |
| 71 | Wiring for light/fan/exhaust fan/call bell points with 1.5 sqmm (22/.3 mm) PVC insulated single core unsheathed stranded Copper conductor ISI marked cable in recessed PVC pipe of ISI mark, MS switch box having wall thickness 16 SWG with 3 mm thick phenolic laminated sheet cover including running of 16 SWG/(1.5sqmm PVC insulated single core unsheathed stranded Copper conductor) copper earth wire along with the pipe duly clamped as required and as per relevant technical specification No.Sr.DEE/G/ALD/IE/94/104/Rev and additional specification .a) Medium Point. | Numbers | 150.00 | 233.81 | 35,071.5 |
| 72 | Wiring for 3/5 pin, 5 Amp. Plug point with 1.5 sqmm (22/.3mm) PVC insulated single core unsheathed stranded Copper conductor ISI marked cable including providing and fixing 3/5 pin 5 Amps. Socket out let with switch on same board and earthing the 3rd pin with 16 SWG/(1.5sqmm PVC insulated single core unsheathed stranded Copper conductor) copper earth wire etc. as required and as per relevant technical specification. | Numbers | 75.00 | 62.94 | 4,720.5 |
| 73 | Wiring for 3/5 pin 5/15 amps plug points with 2.5 sqmm (36/0.3mm) PVC insulated single core unsheathed stranded Copper conductor ISI marked in recessed PVC pipe of ISI marked and MS switch box having wall thickness 16 SWG with 3 mm thick phenolic laminated sheet cover including providing and fixing 3/5 pin 5/15 Amps socket outlets and 5/15 Amps piano type switch and earthing the 3rd pin with 16 SWG/(1.5sqmm PVC insulated single core unsheathed stranded Copper conductor) Copper earth wire along with pipe duly clamped as required and as per relevant technical specification.(5pin 15Amp). | Numbers | 50.00 | 387.67 | 19,383.5 |
| 74 | Wiring for circuit with 2.5 sqmm (36/0.3mm) PVC insulated single core unsheathed stranded Copper conductor ISI marked cable in recessed PVC pipe of ISI marked and running of 16 SWG/(1.5sqmm PVC insulated single core unsheathed stranded Copper conductor) copper earth wire duly clamped with pipe and providing multiway connector on MS switch box for neutral looping etc. as required and as per relevant technical specification.( a ) 2 x 2.5 sq mm. | Metre | 600.00 | 72.26 | 43,356 |
| 75 | Wiring for circuit with 2.5 sqmm (36/0.3mm) PVC insulated single core unsheathed stranded Copper conductor ISI marked cable in recessed PVC pipe of ISI marked and running of 16 SWG/(1.5sqmm PVC insulated single core unsheathed stranded Copper conductor) copper earth wire duly clamped with pipe and providing multiway connector on MS switch box for neutral looping etc. as required and as per relevant technical specification. (b) 4 x 2.5 sq mm. | Metre | 400.00 | 88.6 | 35,440 |
| 76 | Wiring for submain with 4 sqmm (56/0.3 mm) PVC insulated single core unsheathed stranded Copper conductor ISI marked cable in recessed PVC pipe of ISI marked and running of 16 SWG/(1.5sqmm PVC insulated single core unsheathed stranded Copper conductor) copper earth wire duly clamped with pipe and providing multiway connector on MS switch box for neutral looping etc. as required and as per relevant technical specification.(a) 2 x 4 sq mm. | Numbers | 400.00 | 69.27 | 27,708 |
| 77 | Wiring for submain with 4 sqmm (56/0.3 mm) PVC insulated single core unsheathed stranded Copper conductor ISI marked cable in recessed PVC pipe of ISI marked and running of 16 SWG/(1.5sqmm PVC insulated single core unsheathed stranded Copper conductor)copper earth wire duly clamped with pipe and providing multiway connector on MS switch box for neutral looping etc. as required and as per relevant technical specification.(b) 4 x 4 sq mm. | Metre | 300.00 | 110.67 | 33,201 |
| 78 | Wiring for submain with 10 sqmm PVC insulatedsingle core unsheathed stranded Copper conductorISI marked cable in recessed PVC pipe of ISImarked and running of 16 SWG/(1.5sqmm PVCinsulated single core unsheathed stranded Copperconductor) copper earth wire duly clamped withpipe and providing multi- way connector on MSswitch box for neutral looping etc. as required andas per relevant technical specification....2 x 10 sqmm | Metre | 100.00 | 166.98 | 16,698 |
| 79 | Supply, fixing, testing and commissioningELCB/RCCB 40 AMP Double Pole. Inspection by- Consignee. | Numbers | 10.00 | 2,014.95 | 20,149.5 |
| 80 | Supply and burying of earth electrode of 40mm dia 'B' class GI pipe of 3.0 Mtrs long having 12 mm dia holes spaced 75 mm apart drilled upto 2 mtrs length from the bottom including 340 mm wide pit is to be dug upto the depth of not less then 3750mm. The earth electrod lowered in the pit thereafter refilling of pit is to be done with 30mm alternate layer of salt and charcoal upto 2.5 Mtrs. Pit is to be made of not less than 40 x 40 x 30 Cms from inside & precast RCC cover of 40mm thick with lifting arrangement shall confirm to CEE/NR specification No. NR/Elect/Wiring/1-84 and Drg. No. Sr. DEE/G/ALD 10/94. Inspection by- Consignee. | Numbers | 12.00 | 924.8 | 11,097.6 |
| 81 | Supply, replacement, fixing, testing, connecting and commissioning of 72 Watt or above LED street lights fittings.LED Luminaries:-(1) A complete LED lighting unit consisting of a light source and driver together with parts of distribute lights,to position and protect the light source,and to connect the light source to a branch circuit.The light source itself may be an LED array and LED module, or an LED lamp.(2):-Supplied LED luminaries shall confirm to IS:16101(2012) IS :16106(2012).Light Source(LED) in the Luminaries should be of make:- (1):- NICHIA/ CREE/OSRAM/ SEOUL/ PHILIPS/LUMILEDS /LEDNIUM. (2):-LEDs to IS:16105(2012).IS:16108(2012),IEC:62471.Type LED:- High power LED,SMD(Surface Mounting device)/COB(Clip on board).1.Input operating voltage :-105-295 V AC.2:- Normal Voltage-220V AC,3.Driver type: constant current driver with short circuit protection. 4.LED life:- >50000 burning hours.5.Depreciation:- 30% max.after 50000 burning hours.6.Control of distribution:-Full cut off. 7.Surge protection:4KV.8.Drive component :Industrial grade only.9.Efficiency of driver electronic: > 85%.10.Beam angle:>=140 degree along with road and >=80 degree across the road.11.Colour temperature:5000-6500K.12.Colour rendering index(CRI):>=75.13.Ingress protection :IP-66.14.Lumen output: >120 lumens/watt.15.Power factor:->0.95. 16.Total harmonics distortion(THD):- <15%.17.Lamp cover :Toughened glass or UV stabilised poly carbonate.18.Finishing:Power coated /Anodized.19.Secondry optics:poly carbonate reflector/ poly carbonates lens.20.Construction of housing: extruded aluminum/CRCA/Pressure die cast aluminum.21.Mounting:Suitable for existing pole/Truss/Lantern mounted.22.Certificate:Firm to submit LM80(In respect of LED used)& LM79(In respect of luminare used) test certificate from National/International accredited Laboratory and OEM certificate for compliance of BIS/IEC.23.Warranty:Firm to submit warranty certificate for five year along with the supply.All fittings shall be fitted with new suitable bend/elbow with clamp and proper nut and bolt and connection with twisted twin flexible cord of minimum size 16/1 mm copper conductor as per relevant technical specification. Materials parameters must remain unchanged during entire warranty period. Inspection by- Consignee. | Numbers | 120.00 | 2,556.58 | 3,06,789.6 |
| 82 | Supply, fixing, testing, connecting and commissioning of Feeder pillar with 01 no. 250A 04 pole MCCB for incoming & 25 nos s.p. 63A MCB for outgoing as per relevant specification. Inspection by- Consignee. | Numbers | 2.00 | 20,491.06 | 40,982.12 |
| 83 | Supply, erection, testing and commissioning of approved make standard size of following Distribution board recessed in wall having earth terminal block and neutral terminal block to enable termination of conductors incoming as well as outgoing individually by screwed connections and without twisting complete in all respect as per relevant technical specification.DP distribution board of standard size confirming to technical specification No. Sr.DEE/G/ALD/94/104 comprising of one No. 2 pole 32/40 Amps MCB's of approved make.(1) 4-No SP MCB's of 6 Amps as required. Inspection by- Consignee. | Numbers | 10.00 | 913.26 | 9,132.6 |
| 84 | Supply, erection, testing and commissioning of LTSwitch gear panel board of 2mm thick dia pressedCRC steel sheet . Panel shall be treated for anticorrosion treatment and finished with smoke graypaint as per technical specification No. SrDEE/G/ALD/ Panel-94/113 comprisingwith.........MCCB of 400 A, 36 kA Standard breakingcapacity, 415 volt, 3 Phase 4 Pole current rating 400Amp. | Numbers | 1.00 | 12,548.52 | 12,548.52 |
| 85 | MCCB of 250 A, 36 kA Standard breaking capacity, 415 volt, 3 Phase 4 Pole current rating 250 Amp. | Numbers | 2.00 | 10,779.46 | 21,558.92 |
| 86 | MCCB of 125A, 36 kA Standard breaking capacity, 415 volt, 3 Phase 4 Pole current rating 125 Amp. | Numbers | 3.00 | 6,568.96 | 19,706.88 |
| 87 | Supply of Indicator lamps with suitable holder. | Numbers | 18.00 | 81.28 | 1,463.04 |
| 88 | Supply, fixing, testing, connecting and commissioning of Outgoing/Feeder Panel Mounted Multi-function meter with Accuracy Class 1 as per IEC 62053-21 or Class 0.5, 0.5S as per IEC 62053-22.LED meter Cl 1 with RS485: Meter should have following features built-in LED • Flush mounting 96 x 96 mm • True RMS measurement • Password protection provision for security • Site selectable for 3 Phase 4 wire, 3 Phase 3 wire, 1 Phase, CT Secondary 1A/5A, Universal Auxiliary Supply 80-300 VAC/DC, Input Voltage Measurement 50-500 VAC, • 64 samples/ cycle The Meter should be able to read/display following parameters Instantaneous Parameters (V1, V2, V3, V12, V23, V31, Avg (VLN, VLL), A1, A2, A3, Aavg, F, PF-1, PF-2, PF-3, PF (Avg) W1, W2, W3, W (total) VA1, VA2, VA3, VA (total) Cumulative Parameters (Import Wh, Import Vah, Import load hours, Reset (old) Cumulative parameters (Import Wh, Import load hours, Communication (RS485 Modus RTU).complete with all accessories. | Numbers | 7.00 | 2,557.48 | 17,902.36 |
| 89 | Fabrication works and insulated Aluminum bus bars of 1200A capacity for phases & 1200A capacity for neutral Bus bar shall be suitably insulated with heat shrinkable sleeves/ epoxy coating/insulating tap to withstand the test voltage of 2.5 KV Copper strip for connection outgoing as well as incoming with suitable size be provided. Inspection by- Consignee for item no 84 to 89 due to LT panel. | Numbers | 1.00 | 62,297.76 | 62,297.76 |
| 90 | Supply, fixing & commissioning of LT Heat Shrinkable Straight through jointing Kit for 3.5/4 Core 120-185 Sqmm LT XLPE Cable. Inspection by- Consignee. | Numbers | 2.00 | 2,045.67 | 4,091.34 |
| 91 | Supply, erection, connecting, testing andcommissioning of meter cum distribution box madeof 16 SWG MS Sheet as per relevant technicalspecification including providing earth terminal blockfor termination of 6 SWG GI earth wire and neutralblock for termination of neutral conductors byscrewed connections. Box should have lockingarrangement with Allen key with supply & providingMCB B/C series, 10 KA breaking capacity forincoming and outgoing of following capacity andnos. as required as per relevant technicalspecification including supply, fixing connecting andcommissioning of single phase KWH meter offollowing capacity.............(c) For type III Qtrs: OneNo. Single-phase KWH meter 0-20 Amp capacity,one No. DP-MCB of 20 Amp. Cap. for incoming and3 Nos. SP-MCB of 06 Amp. and 2 Nos. SP-MCB of 10Amp cap. 1 No SP-MCB as spare of 06 Amp for outgoing. Inspection by-Consignee. | Numbers | 10.00 | 2,708.45 | 27,084.5 |
| 92 | Supply and erection of 6 Mtr.Galvanised (as per BS EN ISO 1461) octagonal pole with base plate 220 x 220 x 12mm, top 70mm and bottom 130 mm of 3mm thick sheet suitable for maximum wind speed utp 160 Km/Hr. including foundation bolts and foundation with M 20 grade RCC and FE 415 grade reinforcement (450x450x800 Cm deep ) (foundaton should be as per design approved by pole monufacturer) GI base plate G.I. anchor plate etc.as required including supplying and fxing of 1 Mtr. long double arm hot depped galvanised bracket suitable for street light fittings and supplying and drawing of 3x2.5Sq.mm FRLS copper conductor single core cable from junction box with two Nos 6/10AMP MCB to luminaire complete including termination with copper lugs as required. | Numbers | 56.00 | 8,936.17 | 5,00,425.52 |
| 93 | Dismantling of Rail pole/Tubular Pole and mannualloading and stocking of released material from siteto concerning depot store incharge | Numbers | 35.00 | 247.92 | 8,677.2 |
| 94 | Supply, Erection testing, connecting and commissioning of maintenance free Earthing RDSO spec no.RDSO/SPN/197/2008 or Latest consisting of. Earth electrode of copper bonded high tensile low carbon steel rods, specially designed for electrical grounding as per RDSO Spec. No RDSO/SPN/197/2008 or latest. RDSO approved earth enhancing compound in 10 Kg pack - 05 No. Copper tape of 25mm x 6mm x 300mm with 99.9% purity - 2 Nos and another of 25mm x 6mm x 150mm to terminate on earth electrode Supply of insulated connecting cable as per RDSO Spec No RDSO/SPN/197/2008 or latest to connect equipment bus bar 10 meter each earth Installation of Unit Earth consisting materials covered in item 1 in accordance to RDSO Spec No RDSO/SPN/197/2008 or latest Digging of earth to the required depth Insertion of electrodes - 1 Nos Filling of earth enhancing compound, provision of exothermic weld connection on copper tape of 25mmx 6mmx 150mm to the earth electrodes. (All materials tools and fixtures required for the weld to be arranged by the contractor) -5No. 25mm x 6mm x 150mm to the earth electrodes (All materials tools and fixtures required for the weld to be arranged by the contractor)- 1 No. Provision of exothermic weld connection on copper tape of 25mm x 6mm x 150mm to the earth electrodes (All materials tools and fixtures required for the weld to be arranged by the contractor) - 1 No. Provision of exothermic weld one to connecting cable to the earth electrodes and another to the copper tape to be fixed inside the Equipment/Relay rack/apparatus room (features for mounting the copper tape inside the relay room, weld materials, tool, fixtures and other materials required for the weld shall be arranged by the contractor). Inspection by- Consignee. | Numbers | 4.00 | 13,211.04 | 52,844.16 |
| 95 | Supply, erection, testing and commissioning of approved make standard size of following Distribution board recessed in wall having earth terminal block and neutral terminal block to enable termination of conductors incoming as well as outgoing individually by screwed connections and without twisting complete in all respect as per relevant technical specification of DP distribution board of standard size confirming to technical specification No. Sr.DEE/G/ALD/94/104 comprising of one No. 2 pole 32/40 Amps MCB's & 8-No SP MCB's of 6/10 Amps as required. | Numbers | 10.00 | 1,911.31 | 19,113.1 |
| 96 | Supply ,of Auto change Over pannel for CLS 25KVA 150A capacity as per RDSO specification no.TI/SPC/PSI/CLS/0023. Inspection by- Consignee. | Numbers | 2.00 | 1,21,231.69 | 2,42,463.38 |
| 97 | Erection ,Testing commissioning of Auto change Over pannel for CLS 25KVA 150A capacity as per RDSO specification no.TI/SPC/PSI/CLS/0023. Inspection by- Consignee. | Numbers | 2.00 | 4,975.51 | 9,951.02 |
| 98 | Supply of Auto change Over panel for CLS 10KVA 60A capacity as per RDSO specification no.TI/SPC/PSI/CLS/0023. Inspection by- Consignee. | Numbers | 5.00 | 32,675.95 | 1,63,379.75 |
| 99 | Erection ,Testing commissioning of Auto change Over panel for CLS 10KVA 60A/63A capacity as per RDSO specification no.TI/SPC/PSI/CLS/0023. Inspection by- Consignee. | Numbers | 5.00 | 1,668.87 | 8,344.35 |
| 100 | Provision of Thermal Imager Model Testo 872 (Testo 3.5" Colour Touchscreen Thermal Imager 76800 Pixel) or similar make. Inspection by- RITES. | Numbers | 2.00 | 4,22,000 | 8,44,000 |
| Schedule total | ₹98,42,090.53 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022_2022__27_04_227.pdf
ATTACHMENT
GCCACS2022CORRECTION1.pdf
ATTACHMENT
2022_12_13RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril2022ACSNo_2.pdf
ATTACHMENT
Annexure-VA.pdf
ATTACHMENT
AnnxVIB.pdf
ATTACHMENT
InstructionforincorporatingtheJPOCircularetc_ProvisionsintheTenderDocumentforallworksrequiringdiggingworksclosetoRly.pdf
ATTACHMENT
2023_04_26RBCE_CE-I-CTIndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_3ACS-3113.pdf
ATTACHMENT
2023_08_07RBCE_CE-I-CTIndianRailwayStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_4ACS-4.pdf
ATTACHMENT
2023_10_20RBCE_CE-I-CTIndianRailwayStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_5ACS-5.pdf
ATTACHMENT
2023_12_21IndianRailwaysStandardGeneralConditionsofContractApril-2022AdvanceCorrectionSlipNo_6ACS-6.pdf
ATTACHMENT
Likelysourceofsupply_1.pdf
ATTACHMENT
ACS_7to10.pdf
ATTACHMENT
Tenderdocument_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .