SPECIAL REPAIR TO BLDG NO P 113 AND P 116 SERVANT QTRS OF D FLAT AT CME PUNE

Dismantling wall and ceiling boards (fibre, pulp, insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-charge.

M & L for false ceiling with 4mm thick designer 'E' board fixed on GI grid work with powder coated finish on exposed surface of size 0.6 x 0.6m consisting of GI angle supported on wall of size 24mm x 28 x 0.7mm main tee of size 24mm x38mm x 0.7mm, cross tee of size 24mm x 28mm x 0.7 mm using proposed members interlocking to each other and 40mm x 3mm flat GI mild steel strip suspender made to shape at 1200mm c/c fixed with 3mm dia GI wire and making holes etc all as directed including two coats of white wash on ceiling after preparation of surfaces and as per manufacturer instruction complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete (un-reinforced) in roof/floors other than ground floor beam, stair case, landing, chajjas and similar items including water proofing treatment in any layers and removal of debris to distance exceeding 250m and not exceeding 500m from the site complete all as specified and directed by Engineer-in-charge.

M&L for 25 mm thick , PCC 1:2:4 (Type B0 using 12.5 mm stone graded aggregate) as in levelling course to match the undulations of roof and in in coping , roof kerbs, fins including benching etc complete all as specified and directed by Engineer-in-charge.

M&L 10 mm thick cement screed in CM 1:3 mixed with water proofing compound of approved make over RCC roof slab and vertical surface ,finished even and smooth by using steel trowel complete all as specified and directed by Engineer-in-charge.

M&L for APP based polymeric membrane minimum weighing 3 Kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric ( weight not less than 150 gms /sqm) laid over primed surface including bituminous primer conforming to IS-3384 applied @ 0.3 litre/Sqm by forced torch application with minimum 10cm overlap on both ways complete all as specified and directed by Engineer-in-charge. Four course roof treatment consists of as under :- (a) Applying one coat of bituminous primer conforming to IS-3384 @ 0.30 Litre per sqm. (b) Laying of APP based membrane as specified thickness and weight. (c) Applying one coat of bitumen grade 85/25 @ 1.2 Kg/Sqm. (d) Applying two coat of aluminium paint @ 100 ml/sqm

Demolition of cement concrete(unreinforced) in ground floors and pavings not exceeding 15cm thickness(below ;or above ground level) complete all as specified and directed by Engineer-in-charge.

M&L for 75mm thick PCC type D-2 (1:4:8) using 20mm graded aggregate as in sub base etc complete all as specified and directed by Engineer-in-charge.

Dismantling stone slab and tiles of any description and thickness as in floor including cement mortar bedding and rubbish off the premises complete all as specified and directed by Engineer-in-charge.

M & L Machine cut kota stone slab flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed by Engineer-in-charge.