81755 RESURFACING OF ROAD AND ROAD FURNITURE AT VARIOUS LOCATION UNDER AGE BR I UNDER GE NDA KHADAKWASLA

Amount

M&L for preparation of black top surfaces by brushing with wire brushes for removing caked mud, existing layer of thermoplast paint etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags and compressor to remove all loose dirt etc, and apply evenly a priming / tack coat using paving bitiminous primer (VG-10 grade) @ 2.5Kg per 10 Sqm complete all as specified and directed.

Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm, exc. 50mm and not exc. 100mm deep and removing same distance 50m and stacking whereas directed.

M & L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc seeping with brooms and finally fanning the cleaned surface with gunny bags or compressor to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bitumen (VG-10 grade) @ 5Kg Per 10 Sqm complete all as specified and as directed.

M & L for premixed bituminous macadam with paving bitumen (VG-30 grade) using binder content 4% by weight of total mix (Job Mix) laid / rolled with 8 to 12 tonne power roller and compacted to required gradient and camber (consolidated thickness 50 mm) complete all as specified and as directed.

M & L for bituminous premix semi dense asphaltic concrete using paving bitumen (VG-30 grade), 30 mm thick (Consolidated thickness) using binder content @ 5.5% by weight of total mix (Job mix), using mechanical paver rolled with 8 to 12 tonne power roller & compacted to required camber and gradient complete all as specified and as directed. [Note for Sr Item No 4 & 5 above : (i) The actual binder content for BM & SDAC used shall be as per optimised content based on approved job mix formula irrespective of what ever indicated in Schedule Item. (ii) The rate quoted inclusive of work in patch manner]

M&L for repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat with bituminous primer @ 5 kg per 10 sqm, putting in premix as specified for thin bituminous carpet (2 cm thick) well rammed and sealed with premixed sand seal coat (6.8 kg of binder with 0.06 cum of sand), again well rammed (including supply of premix binder and sand) depth of potholes not exc 30 mm complete all a specified and directed. (Note :- The rate quoted inclusive of work in patch manner)

M&L for making lines, dashes, arrows, letters etc., on bituminous surfaces, with retro reflective thermoplastic road marking paint with reflector sign glass beads @ 250 gms per Sqm area confirming to MOST & BIS specification, not less than 2.5mm thick of white / golden / yellow as approved colour/ shade and applied with machine, as per manufacturer's instructions including preparation of surface i.e. cleaning of surface by removing all dust, dirt, oil grease etc complete all as spcified and directed by Engineer incharge

Supply and fixing in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and as directed.

S&F in repair solar stud of width 122.5mm, length 132.5mm, height with stump 55mm, stump dia 26mm electronically operated with solar cell LED PCS, Ni-Cd 1400AH Battery with aluminium main frame bottom frame aluminium, reflective in two opposite direction and fixed in road surface as per manufacturer instructions complete all as specified and as directed.

Supply and fixing in repair metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed.

S & F ir repairs unbreakable traffic convex mirror of 40 Inch dia fixed over and including 50 mm bore SS 304 Pipe of length 2000 mm including embedding in PCC 1:2:4 (300x3000x300mm) type B1 complete all as specified and directed

OM GANESH CONSTRUCTION

MOHANLAL MATHRANI CONS. PVT. LTD.

GS Associates