Providing, installation, testing and commissioning of 6000 GPH x 150 meter head HC pump set with allied works at pumping station Jib stage-1st (New) for village Paltyar (Upper Rehembal).

Amount

Providing, installation, testing and commissioning of 6000 GPH x 150 meter head HC pump set including with allied woks at pumping station jib stage-1st (new) for village Paltyar (upper Rehembal) by way of providing and shifting of pump motor set upto road side near pumping station by mechanical transport, unloading the same from vehicle and then shifting up to pumping station Jib stage-1st (New). The job includes excavation around the foundation block a size of 5’x3’x3’.Dumping of excavated material outside the pump room at a distance of 100 meters approximately. Job further includes providing / fabrication of 6 no. foundation bolts of suitable thickness and length by threading them at one end and making of anchor to other end. Laying of foundation block by way of making bed concrete 1:1.5:3 mix including supply/fixing of farm work / shuttering, aggregates, sand and cement, reinforcement tor steel of 10mm for mesh and all RCC work, angle iron for supporting / alignment of base-frame including cutting, bending, placing in position and binding, welding, placing of foundation bolts with base frame and making proper alignment of base frame horizontally as well as longitudinally, deployment of vibrator, mixer, welding set, shuttering, tools and tackles etc. and curing complete. Placing of pump and motor on the bed plate and Leveling of pump motor set on the base frame by using laminated sheet, strips, gauges and coupling thereof. Laying of 80mm dia GI suction and delivery pipe lines to the pump set by providing/cutting of 80mm dia pipes as per site requirement approximately 18 meters in length, cutting of pipes in convenient lengths with the help of oxygen acetylene gas. The cut edges shall be grinded with grinder to give them a smooth and even surface and then laying, aligning, welding of suction/delivery pipes in continuous fillet weld of 6mm in three layers of advani make super bond welding electrodes of 4mm and 3.14 mm dia . Providing, fabrication and fitting of 80mm dia new MS bends, MS flanges, MS expanders, MS reducers, gaskets, as per site requirement. Providing/fitting of 80mm dia cast iron sluice valve-1no along with nuts, bolts etc. to the suction pipe line and 80mm dia CS sluice valve and NRV CS heavy duty one no. each to delivery pipe line.& then connecting of delivery pipe line with rising mains. Suctions / delivery pipelines should by properly painted with red oxide primer and subsequently with good quality black paint. Providing / fitting of 200 ampere MCCB of Havells / L&T or other equivalent make, ampere meter & voltmeter one no. each on the main board of the pump room with proper cabling, thimbling and insulation material. Job further includes providing and laying of 35mm sq. PVC copper cable or of equivalent rating confirming to ISI standard, from main board to starter & then to motor approximately 45 meters in length. Job also includes testing / commissioning of pump motor set with allied accessories on full load. Job also includes providing and fitting of 185mm2 3.5 core aluminum cable approximately 15 meters in length conforming to ISI standards from stabilizer to the main board in the pump room with proper insulation and grounding. Complete job includes cost of material, machinery, hiring / shifting / carriage charges of material, machinery tools and tackles, crane, gas cutting appliances, welding set, shuttering, vibrator, mixer, skilled and unskilled and labour charges.

G S ENGINEERING WORKS

BEE AAR ENTERPRISES