Annual Maintenance contract for attending complaints and minor project works in IITM Discovery Campus at Thaiyur for the 2024-2025

Amount

Attending day to day maintenance of HT/ LT equipments, break down work, fuse of calls, emergency faults, major break down inside the entire campus including street lights on round the clock service on shift duty work with the following designated staff. (Shift Duty: 2 shifts/day) 1 No Supervisor cum Electrician with valid C License and 1 No helper in each shift and total two shifts in a day. The Supervisor cum Electrician and helper should have minimum three years experience in O & M of Substations up to 11 kV Supply System . Shift Duty time: 6 am to 2 pm & 2pm to 10 pm.(For all days incuding govement holidays).

Removing the following sizes LT UG cable of size up to 3.5c x400 sq.mm from the existing trench of 75cm depth including earth work excavation in all soils and sub soils for identifying the faults and relaying the same cable / other cable in the trench, sand filling and brick cover protection of the cable using existing burnt bricks/ removed RCC troughs etc and back filling. consolidated etc as required.

Supplying& Laying of following sizes PVC XLPE insulated alu. Conductor armored 1100V LTUG cable in a 50 mm to 100 mm dia HDPE DWC pipe in a trench of 50cm wide and 75cm depth including earth work excavation in all soils and sub soils and back filling, consolidated in a regular interval of 25cm thick rammed and complying with standard specification.cable identification on both side with aluminium cable tags.

3.5c x 10 sq.mm XLPE insulated armoured aluminium cable.

3.5c x 16 sq.mm XLPE insulated armoured aluminium cable.

3.5c x 35 sq.mm XLPE insulated armoured aluminium cable.

3.5c x 150 sq.mm XLPE insulated armoured aluminium cable

3.5c x 240 sq.mm XLPE insulated armoured aluminium cable.

3.5c x 400 sq.mm XLPE insulated armoured aluminium cable

Supplying and making end termination for following sizes alu. Conductor LT UG cable using suitable compression gland with required copper ferulles / socket and other jointing materials

4c x 10 sq.mm

4c x 16 sq.mm

3.5c x 35 sq.mm

3.5c x 150 sq.mm

3.5c x 240 sq.mm

3.5c x 400 sq.mm

Providing and fixing following of rating and breaking capacity MCCB in the existing cubicle panel board including drilling holes in cubicle panel, making connections, etc as required.

16 kA,150 amperes 3 pole MCCB

36 kA,125 amperes 4 pole MCCB

Supplying & fixing of following ratings, miniature circuit breaker in the existing MCB/MCCB DB's complete with connections, testing and commissioning etc as required.

6 - 32 Amperes Single pole MCB

6 to 32 Amperes double pole MCB

6 to 32 Amperes triple pole MCB

6 to 32 Amperes Triple Pole and Neutral MCB

63A four pole MCB

Supplying and fixing8 way (4+24) three phase and neutral (VTPN double door type).company made sheet steel, MCB distribution board, 240V or 415 volts, on surface/ recess, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc as required. ( without MCB/ RCCB/ Isolator).

Supplying and making straight thro cable joint for following sizes aluminium or copper Conductor LT UG cable using Heat Shrinkable /cast resin materials ( M-Seal-3M or RPG) with required copper ferulles / socket and other jointing materials.

3.5 core 35 sq.mm ( cast resin)

3.5 core 150 sq.mm ( Heat Shrinkable)

3.5 core 240 sq.mm ( Heat Shrinkable)

3.5 core 300/ 400 sq.mm ( Heat Shrinkable)

Labour charges for making temporary connections to pump motors / streetlights / Residential buildings in case of existing cable failure by laying copper / aluminium wires from the nearest source of supply. (Necessary wires has to be supplied by the contractors and removed after making permanent connections)

Supplying of following accessories for replacement in item no.1 and when required during the contract period.

60W LED fitting DC Drive( XO75C070V107FNYIB0 OR EQUIVALENT IN Aspproved make)

90W LED fitting DC Drive(X100CO70VI43FNYIB0 OR EQUIVALENT IN PHILIPS)

Surge protectors for LED fittings ( SRPSQ-10kV/5kA-440 10kV OR EQUIVALENT IN approved make)

60w Street light LED fitting complete set with built in Drive. ( CRP-409-60-57-SL-GL-NSG OR EQIVALENT IN approved make)

90w Street light LED fitting complete set with built in Drive. ( CRP-404-90-57-SLGL-NSG OR EQIVALENT IN Approved make)

100w Flood light LED fitting complete set with built in Drive.( LHB-100-CDL-60/M or equivalent in approved make)

Crompton Make LDLSRN24-CDL Model 1200 x 24 W LED Battern 3000K/ 6500k or equivalent in Approved make

18W LED Surface / Recessed mounting fitting complete set. Crompton make Model LCDSPLN-R-18CDL Square or Round or eqivalent in Approved make

Supply and fixing of streetlight PVC control box of 200x150x100mm size with suitable clamp with hylem sheet inside comprising 63A 4 way connector and a 10A SP MCB with necessay connections.

Point wiring in PVC conduit, with modular type switch/regulator wiring for light point/ fan point/ exhaust fan point/ call bell point/ 6 amps switched socket with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, with modular switch, modular plate, suitable GI / PVC box, ceiling rose, round block and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required and instructed by the engineer incharge. Group C

Supplying and fixing of following modular switch/ socket on a modular plate & G I /PVC switch box including connections as required

6 amps. socket controlled by 6 amps. one way switch.

6/16 amps. socket controlled by 16 amps. one way switch.

Wiring for circuit/submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface /recessed medium class PVC conduit as required.

2 runs of 1.5 sq.mm and 1 run of 1.5 sqmm cable.

2 runs of 2.5 sq.mm and 1 run of 2.5 sqmm cable.

2 runs of 4.0 sq.mm and 1 run of 4 sq.mm cable.

Supplying, installing, testing and commissioning of 1200 mm sweep super efficient BLDC / Orient PSPO ceiling fan with 3 leaf , 5 speed completely pre wired up to the terminal block complete as required.The sample to be got approved before procurement.

Supplying and installation of 300 mm sweep exhaust fan following exhaust fans with metal blade and louvers/ shutters in the existing opening and making connections and testing, commissioning etc as required.

Earthing with copper earth plate 600x600x3mmthick including acessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7m long etc with charcoal/coke and salt as required.

Earthing with GI earth plate 600x600x6 mmthick including acessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7m long etc with charcoal/coke and salt as required.

SITC of Chemical Earthing -copper bonded solid rod 25mm dia earth electrode with ,3 metre length with 50Kg high conductive earthing compound including all acessories and providing HDPE round earth pit chamber and cover (300MMx350MM) with cover plate having locking arrangement as instructed by engineer incharge.(make: cikit,infinite, Ashlok).

Supplying and laying of following size earth flats at 0.50 mt below the earth including soldering/welding as required

Single run of 16 sqmm multistranted copper wire in a suitable PVC pipe and clamps

25 x 5mm copper flat

25 x 5mm GI flat

50 x 6 mm GI Flat

Supplying and replacing of 220V AC indication LED lamps as instructed by the Engineer incharge.

Testing of earth electrodes using necessary testing equipment and improve the earth by excavating the soil and sub soil and refilling the same with alternate layer of charcoal/coke and salt if required. The values are to be entered in a seperate register and submitted to the Engineer incharge . The work should be inclusive of replacement of bolts and nuts, white washing the masonary pedastals , paint marking the earth values, date of testing done , due date for the next test and pit number on the enclosures and also inside the earth pit.

Supplying and replacing of silica Gel for the Power/ Distribution transformer breathers

Supplying and replacing of mineral oil suitable Power/ Distribution transformer as per IS 335/1993

PRIYA ENTERPRISES ELECTRICALS

Madras Power Corporation