MAINTENANCE, REPAIR AND REPLACEMENT OF DEFECTIVE ITEMS OF STREET LIGHTS, SECURITY LIGHTS, HIGH BAY LIGHTS, HIGH MAST LIGHTS, SOLAR LIGHTS AT VIMAN NAGAR, 509 AREA AND 1020 AREA AT AF STATION PUNE

Amount

Lowering down of high mast light at any height repairing and replacement of unserviceable parts such as ignitor, capacitor, ballast, lamp electronic driver and internal and external circuit etc as required on site complete all as specified and directed (Note : Spare / parts required for replacement shall be measured and paid seperately and lowering down work may be carry out as and when required basis for any kind of repair.)

Taking down the existing street light fitting and Supply & fix (in Repalcement) energy saving and environmental frindly long life LED Street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with impact and corrosion resistant including thermal management in multiple optics IP 65/IP66 road way luminaries with LEDs as light source and lens embedded PC cover /toughened glass and impact resistance of IK07 and electronic driver fixed on pole with and including suitable dia size bracket as per manufacturer recommendation, bracket 1.5 m long complete with MS flat iron clamps (clamp shall be 40x5 mm MS flat), nuts and bolts and washers painting the clamps with coat of aluminium paint over a coat of red oxide primer including connection complete all as specified and directed

Ditto all as per Ser Item No. 2.00 above but 45 Watt complete all as specified and directed

Ditto all as per Ser Item No 2.00 above but 60 Watt complete all as specified and directed

Ditto all as per Ser Item No. 2.00 above but 70 Watt complete all as specified and directed

Ditto all as per Ser Item No. 2.00 above but 90 Watt complete all as specified and directed

Taking down the existing Flood lights fitting and Supply & fix (in Repalcement) energy saving and environmental frindly long life exclusive innovative flood light luminaries 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant with LEDs as light source and lens embedded PC cover /toughened glass and impact resistance of IK07 and electronic driver fixed on high mast pole or any any other place as requird on site incl making all nacessary arrangement for fixing complete with MS flat iron clamps (clamp shall be 40x5 mm MS flat), nuts and bolts and washers complete all as specified and directed Make Havells/ Crompton/ Jaquar

Ditto all as per Ser Item No. 7.00 above but 120 Watt complete all as specified and directed

Ditto all as per Ser Item No. 7.00 above but 170/180 Watt complete all as specified and directed

Taking down old,rusted, unsv Junction box of any size, type and supply & fix new junction box of size not less than 25Cm x20 Cm x 11 Cm, made out of Fibre material, shockproof and rustproof, cable entry from bottom. 100% wheather proof, restricted to unauthorised tapping with class FV-0 as per IS : 11731 Part-II or V-0 as per UL-94 and fixing to pole etc using suitable clamps nuts, bolts etc for accommodating and including the following :- a) two Aluminium Bus bar of capacity 100 A , 10 CM long- 01 Set b) MCB SP 10A-01 Nos

S&F in replacement of old unserviceable contactor ML-4, 70 Amps power operating voltage 415 V AC Capacity complete all as specified and directed. Make :- L&T Cat Part No. SS 90910/ Siemens / GI.

S&F inreplacement of old unserviceable contactor ML-3, 40 Amps power operating voltage 415 V AC Capacity complete all as specified and directed. Make :- L&T Cat Part No. SS 90721 / Siemens / GI.

S&F in replacement of PVC insulated 1.5 sqmm copper two core conductor cable between cable loops box to fitting drawn through the pole complete all as specified and directed

Taking out the old unsv pole ,Supplying and erecting ( in true vertical position) steel tubular swaged poles complete with cast iron base plate final taper plug, bolts nuts and screws all as specified of type 410-SP-31 (9.0 mtr length) complete all as specifed in IS 2713 (part-II) 1980 including one coat or red oxide primer and two coats of aluminium paint to exposed surfaces and with blach bituminous paint for embedded portion of pole complete all as specified and directed

Excavation in trenches not exc 1.5 m wide and exc 1.5 m in depth and getting it out for laying of cable / pole etc complete all as specified and directed

soft/loose soil

Hard/dense soil

Returning, filling in, including spreading, leveling watering, and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and directed

Removing excavated material n.exc 50m and depositing where directed at a level exc. 1.5 cm above the starting point complete all as specified and directed

Material and labour for stone dust sand cushioning to under ground cable, provided with a layer 8 cm before and 10 cm after laying and stretching jointing and testing the cable complete all as specified and directed [Note : Measuremenet will be done after punning]

Supplying and laying Brick, flat, size 230mm x 110mm x 75mm for cable protection complete all as specified and directed

M&L for cement concrete (1:4:8) type D2 in foundation filling and mass concrete using 40mm graded stone aggregate for pole foundation or as per site reuirement at electical installations complete all as specified and directed

M&L for cement concrete (1:3:6) type C2 in foundation filling and mass concrete using 40mm graded stone agg for pole/stay foundation or as per site reuirement at electical installations complete all as specified and directed

M&L for cement concrete (1:2:4) type B1 in foundation filling and mass concrete and coping of poles or as per site reuirement at electical installations complete all as specified and directed incl necessary form work using 20 mm graded stone aggregate etc

Supply and fix GI Pipe Light grade with all connected accessories of sizes 40 mm complete all as specified and directed

Supply and fix GI Pipe Light grade with all connected accessories of sizes 50 mm complete all as specified and directed

Supply and fix GI Pipe Light grade with all connected accessories of sizes 80 mm complete all as specified and directed

Taking out Unserviceable LT UG cable any size from site complete all as specified and directed

Supply, laying, jointing, testing and commissioning of LT under ground cable 1100 volts grade XLPE (cross linked polythene ) armoured with galvanised round steel wire or steel strip , electric power cable heavy duty, with multi stranded aluminium conductor, laid in trenches, ducts fix on walls/poles with proper size saddles and clamp laid under roads/path/ drain /colverts or enclosed in GI pipe/ fix complete incl taking out unserviceable cable complete all as specified and directed for following size:-

25 Sqm 4 core

16 Sqm 4 core

35 Sqm 3.5 core

Supplying and fixing 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1 mtr apart including 4 mm suspension wire, one twin core multistranded cable flat or circulas 4 sqmm incl taking out old unserviceable wire complete all as specified and directed

Ditto all as per Ser Item No 28.00 above but Service wire of size 6 Sq mm twin core complete all as specified and directed

Ditto all as per Ser Item No 28.00 above but Service wire of size 10 Sq mm twin core complete all as specified and directed

M&L for scrapping of old alum paint of steel tubular pole 9/11 mtr by means of emery paper for preparation of smooth surfaces and painting with two coats of alum paint on pole , brackets old junction boxes channels etc incl alternate 30 cm wide white and blue strip painting up to 1.5 Mtr height from ground level incl fixing of red bright laminated reverse lights reflection strip 100 mm wide 03 round and Pole Numbering complete all as specified and directed

M&L for scrapping old painted surface with emery paper for preparation of smooth surfaces and spray painting with two coats of synthetic enamel paint (as existing on site) for LT/HT Panel/ fidder pillers boxes etc complete all as specified and directed

Surface cleaning/site clearance n exc 15 cm in depth in Elect Sub stations area, trenches,sub station rooms two / four pole structure surroundings to make a over all presentable condition complete all as specified and directed

Trimming for branches of trees, bushes, hurbs under over head line including removal of trees branches etc to a distance not exceeding 50 mtr from over head line complete all as specified and directed

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 25 to 50 sqmm,Indoor/Outdoor type

Ditto all as per Ser Item No 35.00 above but for cable of size 70 to 95 sq mm complete all as specified and directed

Supply and fixing LED Post top fitting 35 Watt 5700 K CCT IP 65 powder coated aluminium die cast and spun aluminium with clear diffuser suitable for landscape lighting incl making necessary arrangement for mounting fitting as reqd on site and testing complete all as specified and directed Make Havells /Halonix/Polycab/Crompton

Taking out the old one and Supply, Install, Test and Commissioning of Feeder pillar box out door type fabricated out of 3 mm thick CRCA sheet double door, of size 500x500x300 mm complete with powder coating with seven tank process mounted on M.S angle Iron frame, duly grouted with PCC reqd. with all electrical connection complete all as specified and directed including following:- (a) S&F MCCB TPN 100 Amps 10KA -1 Nos (b) S&F Street light timer -1 Nos (c) S&F 70 Amps Contactor -1 Nos (d) MCB 40 Amps SPN, 10 KA - 01 Nos

Earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6mm as earthing lead buried directly in ground vertically to a depth not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 Mtr below normal ground level connected to and including galvanised iron strip 25 X 4 mm as earthing lead by means of bolts, nuts, check nuts & washers etc made of GI and connected to earthing test point all as shown in electrical plate No. 5 of SSR Part I of 2009 & as specified or indicated and testing on completion including excavation/earth work in any type of strata PCC ( 1:3:6 ) type C1 earthing chamber, pre cast slab cover 50 mm thick in cement concrete ( 1: 2 : 4 ) type B 1 ( reinforced with welded steel wire fabric (XPM) weight not less than 4 Kg / Sqm), funnel with wire mesh, watering pipe of 20 mm bore medium grade, including galvanised iron strip 25X4 mm with GI protection pipe of 40 mm medium grade up to 7.5 meter length, etc complete all as specified and directed

Taking old unserviceable driver from LED light fitting and S&F LED outdoor driver with all Electricals connection as per existing make on site and testing for smooth functioning complete all as specified and directed

for LED light fitting 60-72 Watts

for LED light fitting 80-120 Watts

for LED light fitting 150 Watt

for LED light fitting 250 Watt

for LED light fitting 300 Watt

Inkhead Corporation

Maruti Abhiyantriki

Rama Electricals