Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.0 LAccepted-AOC FLAT NO A 102 ASHOKVAN RAJSHIV CO OP HSG SOC SHIV VALLABH ROAD DAHISAR EAST MUMBAI 400 068 | MUMBAI SUBURBAN | MAHARASHTRA | 400068 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹49.9 L+₹7.3 L (17.3%)Rejected-Finance FLAT NO 402 4TH FLOOR BLDG NO 31 HANSGEET CO OP HSG SOCIETY PANT NAGAR GHATKOPAR E MUMBAI 400 075 | MUMBAI SUBURBAN | MAHARASHTRA | 400075 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹52.9 L+₹10.3 L (24.3%)Rejected-Finance NOT AVAILABLE | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹55.5 L+₹13.0 L (30.5%)Rejected-Finance PART III GANESH MURTHI NAGAR CAPT PRAKASH PETHE MARG CUFF PARADE ROAD COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹59.1 L+₹16.6 L (38.9%)Rejected-Finance | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹1.1 L
Closing Date
28 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
REPAIRS MAINT TO DANGEROUS CONCRETE FRP GALVALUME CHAJJAS AT CERTAIN BUILDINGS AT OLD NAVY NAGAR UNDER AGE BR I UNDER GE (NW) NAVY NAGAR COLABA MUMBAI
2023_MES_604754_1
8143/CWE (NW) Mumbai/E8
Open Tender
Civil Works
Item Rate
180 days
GE (NW) Navy Nagar
Class C
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Navy Nagar
₹1.1 L
Yes
23 Sept 2023
21 Jun 2023
31 Jul 2023
21 Jun 2023
28 Jul 2023
14 Jul 2023
21 Jun 2023 - 10 Jul 2023
Amount
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by Engr-in-Charge.
Material & labour for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick wall and inserting the sheets into these grooves including necessary working platform/scaffolding complete all as specified and as directed by Engr-in-Charge.
ditto all as per item No 2.00 above but except sheeting complete all as specified and as directed by Engr-in-Charge.
Material & labour for pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws as specified including making grooves of minimum 50mm into brick wall and inserting the sheets into these grooves including necessary working platform/scaffolding complete all as specified and as directed by Engr-in-Charge.
Cutting chases, pinning in and making good to facings of brick/concrete/stone walling where required and pointing in cement mortar 1:3 by using latex additives (MONOBOND) @ 500ml/bag cement used to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and as directed by Engr-in-Charge. (Note : Monobond additive will be measured and paid separately)
Material & labour in repair for filleting in any position and to any shape of section area exc 25 sq cm but n.exc 50 Sq cm in cement sand mortar 1:3 by using latex additives (MONOBOND) @ 500ml/bag cement used etc complete all as specified and as directed by Engr-In- Charge. (Note : Monobond additive will be measured and paid separately)
Supply only latex additives (MONOBOND) complete all as specified and as directed by Engr-in-Charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engr-in-Charge.
Supply & fixing Mild steel Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde - E- 165 including necessary working platform/scaffolding complete all as specified and as directed by Engr-in-Charge.
Ditto all as per item No 8 above but fixing only complete all as specified and as directed by Engr-in-Charge.
Supply & fixing Mild steel rolled section as in main and cross beam, hip and jack rafters, purlins where connected to common rafter and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates etc complete conforming to Fe-410- W(Gde?E-250) quality? including necesary working platform / scaffolding complete all as specified and as directed by Engr-in-Charge.
Supply & fixing Mild steel Framed brackets of angles or tee with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary, gusset plates, riveting etc n exc each 10Kg bracket confirming to Fe 410 or Fe 310-0 including necessary working platform/scaffolding complete all as specified and as directed by Engr-in-Charge.
Supply & fixing 10 mm dia 100 mm long dash through fasteners bolts fixed in concrete or brick work to hold brackets etc Complete all as specified and as directed by Engr-in-Charge.
Material & Labour for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.
Material & Labour for preparation of old steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-In- Charge.
Taking down cement or cement lime plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc including necessary working platform / scaffolding.
Removal of existing water proofing treatment of the roof, cleaning, with wire brushes etc including taking down old plaster demolition of PCC padding of any description and in any position including removing demolished materials outside MOD land complete all as specified and as directed by Engr-In- Charge.
Material & Labour for cement plaster 15 mm thick using factory manufactured pre mix/ready mix of 'Roofit Mix'of M/s Premier Floor to Roof Materials pvt.ltd/ 'Easy plast' of M/s Walplast Products pvt.ltd/ 'Readiplast' of M/s Ultratech Cement Ltd/'Soundplast PMC-1' of M/s Sound buildcare Pvt .Ltd/ or other approved equivalent make, having minimum composition of C:S :: 1:4 using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties, mechnIcal mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer and applied over exterior masonry and concrete surfaces as final rendering, including using richer mix for making corners if necessary, at all floors and level, including making grooves of existing size wherever required, including cleaning the surfaces, curing etc complete all as specified and as directed by Engr-In- Charge.
Material & Labour for protecting the roof including parapet wall with polyurethane hybrid next generation liquid applied on roof, top coat waterproof coating with flutyne protection technology, Complete all as specified and as directed by Engr-in-Charge below: (a) Applying one coat of primer on cleaned and dried surface spreading at the rate as per manufacturer’s instructions and allowing primer coat to dry for upto 6 to 8 hrs. (b) Applying 1st coat of polyurethane hybrid next generation liquid applied on roof, top coat waterproof coating without dilution and spreading at the rate as per manufacturer’s instructions. Allowing the first coat to dry for approximately 4-6 hours before applying the 2nd coat at 90° to the first coat. (c) Laying of 45 GSM Fiber glass mesh incorporated on the 1st coating as a sandwich layer when the first coat is still in wet condition. (d) Applying 2nd coat of polyurethane hybrid next generation liquid applied on roof, top coat waterproof coating without dilution at 90° to the first coat and spreading at the rate as per manufacturer’s instructions. (e) Applying 3rd coat of polyurethane hybrid next generation liquid applied on roof, top coat waterproof coating without dilution at 90° to the 2nd coat and spreading at the rate as per manufacturer’s instructions. Ensuring that there are no pinholes or air bubbles on the membrane. (f) Allowing the system to air cure for 7 days minimum. (Note : The work shall be carried out by authorised applicator only.)
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces Complete all as specified and as directed by Engr-in-Charge.
Material & labour for Preparation of old decorated surfaces of walls by washing the surfce thoroughly, filling the cracks, creaves with crack-filling-compound (Make : DR FIXIT CRACK SHRINK FREE or Equivalent ) and applying one coat of acrylic emulsion exterior grade (100%) etc complete all as specified and as directed by Engr-in-Charge. Note : - (a) Old surface shall be cleaned with bleaching powder as specified and as per manufacturers instructions , all cracks shall be filled with white cement and sand mortar (1:3) by making V- grooves . (b) Acrylic painting shall be done with rollers (c) Fungus formation to be cleaned throughly with wire brush or by any other means.
Taking down CI soil/ waste/ vent/ pipes including all fittings like shoes bends swan necks etc of any dia upto 20 mtr height all as required Complete all as specified and as directed by Engr-in-Charge. (Including necessary scaffolding and safety equipments)
Supply & fixing Cast Iron soil/ waste/ vent pipes in any length with or without ears 100mm bore ISI marked (sand cast) in any length with cement joints fixed to walls upto 20 mtr height Complete all as specified and as directed by Engr-in-Charge. (Including necessary scaffolding and safety equipments)
Supply & fixing Cast Iron soil/ waste/ vent pipes in any length with or without ears 75 mm bore ISI marked (sand cast) in any length with cement joints fixed to walls with Flat Iron clamp upto 20 mtr height Complete all as specified and as directed by Engr-in-Charge. (Including necessary scaffolding and safety equipments)
Supply & fixing CI bends or tee( any radius ) for soil / waste pipes 100 mm bore diminshing pieces or tapers on walls Complete all as specified and as directed by Engr-in-Charge.
Supply & fixing CI branch pieces single (equal or unequal ) ordinary or inverted (spigot or socket type) wirh parallel branches for 100 mm bore pipe Complete all as specified and as directed by Engr-in-Charge.
Supply & fixing Bends or Tee (any radius), diminishing pieces or tapers (larger bore measured) with oval doors of 75 mm dia Complete all as specified and as directed by Engr-in-Charge.
Supply & fixing Branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted without oval access doors of bore 75 mm Complete all as specified and as directed by Engr-in-Charge.
Taking down rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) including necessary working platform (scaffolding) and safety measures complete all as specified and as directed by Engr-in-Charge
Supply and fixing PVC (SWR) 160mm bore pipes in any length with rubber ring joints fixed to wall with dash through fastners and clamp of 15 x 1 mm FI including all fittings like sockets etc. necessary working platform /scaffolding and safety measurs complete all as specified and as directed by Engr-in-Charge.
Supply & fixing PVC bends of 160mm dia complete all as specified and as directed by Engr-in-Charge.
Supply and fixing PVC (SWR) 110mm bore pipes in any length with rubber ring joints fixed to wall with dash through fastners and clamp of 15 x 1 mm FI including all fittings like sockets etc. necessary working platform /scaffolding and safety measures complete all as specified and as directed by Engr-in-Charge
Supply & fixing PVC bends of 110mm dia Complete all as specified and as directed by Engr-in-Charge.
Grubbing up and uprooting of trees / plants from external walls of bldgs pouring muratic acid for burning residual roots if any. Raking out the dead roots from plants / concrete joints upto its penetrated portion and filling with PCC (1:2:4) 12.5 mm graded aggregate and finishing the surface with 15mm rendering in CM (1:4) including necessary hanging arrangement complete all as specified and as directed by Engr-in-Charge.
Material & labour for Writing letters or figures (Block,Roman,Italic, or Indian) exc 60 cm but not exc 90 cm high using two coats of Acrylic paint exterior grade (100%) acrylic over a coat of primer including preparation of surfaces of walls etc specified on external surfaces. (letter writing shall be done at isolated locations at height not more than 10 m above Ground level) complete all as specified and as directed by Engr-in-Charge.
Disconnecting existing water tanks, exc 500 but n exc 1000 ltrs setting aside (or lowering if required) for repair etc and hoisting reconnecting and refixing in position including cleaning complete all as directed by Engr in Charge
Disconnecting existing water tanks, exc 1000 ltrs but n. exc 2000 ltrs setting aside (or lowering if required) for repair etc and hoisting reconnecting and refixing in position including cleaning complete all as specified and as directed by Engr-in-Charge.
Material and labour for protecting the roof including parapet wall with heavy duty reinforced elastic and resilient acrylic polymers water proof coating, complete all as specified and as directed by Engr-in-Charge. (a) Cleaning the surface by jet pressure motor and applying one coat of primer as per manufacturer's instructions and allowing to dry for 6 to 8 hrs. (b) Applying 1st coat of heavy duty reinforced elastic and resilient acrylic polymers water proof coating over primer surface @ 2 sqm/ ltr without dilution and allowing to dry for 6 to 8 hrs. (c) Laying of 45 GSM fiber glass mesh incorporated on the 1st coating as a sandwich layer by roller when the first coat is still in wet condition. It will not be considered as second coat. (d) Applying 2nd coat of heavy duty reinforced elastic and resilient acrylic polymers water proof coating over 1st coat @ 2 sqm/ltr without dilution after 6-8 hrs of drying of 1st coat and allows to dry for 6 to 8hrs. (e) Applying 3rd coat of heavy duty reinforced elastic and resilient acrylic polymers water proof coating over 2nd coat @ 2 sqm/ltr without dilution after 6-8 hrs of dryling of 2nd coat and allows to dry for 6-8. The total thickness 1 to 1.25 mm or more must be achieved after 7 days of air cure. Note :- (i) The colour of each coat shall be as directed by GE. (ii) The work shall be carried out by authorized applicator only. (iii) Water proofing to rain water spouts to be done as per manufacture instruction.
RAMESH ENTERPRISES
SHREE JAGDISH FURNITURE CO.
P LAXMI AND CO.
SATYANARAYAN CONSTRUCTION
ORIENT ELECTRIC CO
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .