Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.3 LAccepted-AOC | L1 | Accepted-AOC AOC PLACED ON L1 BIDDER WITH CONTRACT AGREEMENT NO GE/SHL/26 OF 2023-2024 | |
| 2 | L2₹40.2 L+₹7,259.14 (0.18%)Rejected-Finance | L2 | Rejected-Finance REJECTED BEING L2 BIDDER | |
| 3 | L3₹42.4 L+₹2.2 L (5.60%)Rejected-Finance 7TH MILE UPPER SHILLONG P O NONGLYER SHILLONG MEGHALAYA | EAST KHASI HILLS | MEGHALAYA | 793009 | L3 | Rejected-Finance REJECTED BEING L3 BIDDER | |
| 4 | L4₹45.6 L+₹5.4 L (13.6%)Rejected-Finance | L4 | Rejected-Finance REJECTED BEING L4 BIDDER | |
| 5 | L5₹46.1 L+₹6.0 L (15.0%)Rejected-Finance | L5 | Rejected-Finance REJECTED BEING L5 BIDDER |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
13 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SHILLONG
GE SHILLONG SHILLONG DIVISION PIN 793002
PROVISION OF REPLACEMENT OF OLD CGI SHEET AT BLDG NO P 179 P 177 S 20 S 23 P 38 P 46 A 101 A 102 AND A 103 OF ARC UNDER GE SHILLONG
2023_MES_596132_1
GE/SHL/TOKEN-05 OF 2023-24
Open Tender
Civil Works
Item Rate
270 days
GE SHILLONG
ALL AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
Yes
GE SHILLONG
₹87,000
Yes
10 Aug 2023
17 May 2023
14 Jun 2023
17 May 2023
13 Jun 2023
31 May 2023
Amount
S & F Pre-painted galvalume aluminium zinc coating GI based corrugated/ semicorrugated, steel sheet 0.50 mm thick of an colour having tensile strenngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings in complete all as specified and directed.
S & F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strenngth of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings in complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
S & F roof trusses (framed), trussed, purlins, crane gantries, railing, access ladders, frame work for valley gutters and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.
S&F 2mm thick fibre reinforced translucent plain or corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof , wall etc complete all as specified and as directed.
S&F 0.68mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and as directed.
S&F 2nd class HW plain fillets square rectangular triangular in section, clean sawn secured with nails section area exc. 13sqcm but n.exc 25sqcm complete all as specified and as directed.
S&F in repairs 2nd class HW plain fillets square rectangular triangular in section, clean sawn secured with nails sectiona area exc 6sqcm & n.exc 13sqcm complete all as specified and directed.
M&L for 2nd class hard wood plain fillets bullnosed, splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws sec are exc 3sqcm and n exc 6sqcm complete all as specified and as directed.
Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section of unframed work complete all as specified and as directed.
Dismantling wall and ceilling bords of any description including cover fillets complete all as specified and directed.
M&L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with nails as in ceiling complete all as specified and directed.
S&F false ceiling of Non asbestos fibre decorative cement building boards manufactured from homogeneous mixture of cement quartz and cellulose and cured with high pressure steam using auto claving process confirming to IS-14862, of size 605 mm x 605 mm x 4 mm thick fixed over and including anodised aluminium powder coated (minimum thickness of powder coating 50 micron) snap grid frame work of T section (main & cross member) of size 25 mm x 25 mm x 1.5 mm thick in square pattern of grid size 605mm X 605mm.The aluminium frame work will supported on side wall with the used of aluminium 'L' section of size 25 mm x 25 mm x 1.5 angles etc. Snap grid shall be supported with hangers of 4 mm dia. Galvanised iron wire adjusting level fixed to roof slabs / truss etc by means of ceiling cleats made out of Galvanised iron flat of size 40 x 3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified directed by the Engineer-in-Charge. Make : Everest or equivalent as approved by GE
S&F 2nd class HW boarding 20mm thick fixed with nails as in eaves board planed one side with butt joint including dismantling boarding of any description complete all as specified and as directed.
M&L for preparation of new wooden surfaces of any description n.exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of new painted wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L for preparation of old decorated plastered surfaces/non abestoes fibre of ceiling including cornices, plasters etc and applying two coat of white wash complete all as specified and directed
S&F 110mm PVC (SWR) pipe single socket in any length with rubber ring jointed fixed to wall with clamps (ISI Mark).
S&F 110mm bore PVC (SWR) bends /door bend of any radius with cement solvent, cement joints, complete all as specified and as directed.
S&F PVC gutter , Half Round, 180mm size complete all as specified and directed.
S&F Joint Bracket (with 2 clamps), 180mm for PVC pipes (half round) complete all as specified and directed.
S&F Support Bracket, 180mm for PVC pipes (half round) complete all as specified and directed.
S&F Running Outlet (with 2 clamps), 180mm for PVC pipes (half round) complete all as specified and directed.
S&F Stop End Outlet (with 1 clamp), 180mm for PVC pipes (half round) complete all as specified and directed.
S&F PVC Reducer, 180mmx110mm complete all as specified and directed.
Taking down cement plaster in cement or cement lime mortar on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, Including removal of debries out side MD land complete all as specified and directed.
M&L for rendering 10 mm thick on concrete surface in cement mortar (1:6) as backing coat and 5 mm th in CM 1:4 using finishing the surface even and smooth without using extra cement, including mixing only liquid water proofing compound as per manufacturer instruction complete all as specified and as directed on External surface. Note:- WPC will be measured & Paid separately
Supply only for water proofing compound complete all as specified and directed.
Repair to damagedroof after complete removal existing treatment including padding, cleaning, the surface using wire brush brooming down and appplying the following treatment all as directed in order of precedence as stated:- (i) Rendering 15mm thick in Cm (1:3) with water proofing compound on existing roof surface true to level after applying cement slurry @ 3Kg/Sqm. (ii) Applying one coat of a tack coat of industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including surfaces. (Note :- Industrial bitumen (Make: M/s STP Ltd or M/s Texsa India Ltd) (iii) supply and laying 3mm thick APP based polymeric membrance of approved manufactured with weight not less than 3.00 Kgs Sqm reinforced with non-woven polyester febric weight not less than 150gms peer Sqm. Polymeric membrance shall be taken to a height of 3cm (minimum) and than inserted inside the groove of parapet wall and shall be finished by a membrance flashing. Note :- (a) Laying APP based polymeric membrance shall be done torch on method as per manufacturers instructions. (b) A minimum overlap of 100mm and 75mm should be made at the end and sides of the polymeric membrance respectively and sealed all overlaps and joints as per manufacturers instructions. (c) APP based polymeric membrance shall be "SUPER THERMOLAY" manufactured by M/s STP Ltd of "MOPLY FP 3mm" manufactured by M/s Texas India Ltd & equivalent of Shivam Tar product. (v) Applying one coat of aluminum paint over the APP modified membrance @ 0.11Kg/sqm.
S & F 500 litres capacity double layer, rotational molded, polythene (white colour), tripple layer water storage tank, ISI Marked (Cylindrical vertical with closed top),colour white , hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including dismantling complete all as specified and as directed. Make : Sintex, Polycon, waterwell.
S&F in repair for 20mm dia Ball cock valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0 m m - 2 1 0 g m s ) complete all as specified and directed. Make: Prayag or Equivalant.
Taking down GI tubing 15mm dia and connection including removable to store complete all as specified and directed.
Supply and fix 15 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including concealed in wall all as specified.
Refixing only 15mm tubes any grade, to walls and ceilings or laying in floors complete all as specified and directed.
Taking down GI tubing 20mm dia and connection including removable to store complete all as specified and directed.
Supply and fix 20 mm bore galvanised steel water tubing, medium grade including necessary fittings such as GI bends, tee, union etc fixed on wall / floor complete and connecting to water supply pipe line including concealed in wall all as specified.
Refixing only 20mm tubes any grade, to walls and ceilings or laying in floors complete all as specified and directed.
M&L for preparation of old steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat red oxide primer all as specified.
M/S SAMAL CONSTRUCTION
M/S BISWA CONSTRUCTION
M/s Chandan Kumar Thakur
M/S K R DEY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .