Rev of Panchayat Ghar at

Engagement of laborers with all necessary tools and equipment for clearance and removal of Broken Windows and Glasses, thorough cleaning of PYT building, carriage of salvaged/unserviceable materials from site to designated location, and proper disposal of debris. The work shall be executed strictly as per the directions of the Engineer-in-Charge, ensuring safety, hygiene, cleanliness of site, and compliance with relevant specifications

Providing and fixing glass panes with putty and glazing clips in windows, clerestory windows, all complete 5.0mm thick glass panes

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length(KD Wood)

P/F of Colour Coated sheet Soffits with KD jambs (50mm x 38mm) 2 feet spacing

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg / 10sqm) (Snowsum)

Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately). Imported wood thickness of shutter in mm per sqm : 30 mm including glass panes 4mm thick KD wood comp.job

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. completeSize of tile 600x600 mm

Providing and fixing 10 mm thick plywood in ceiling and soffits, including necessary framework made of 50 mm × 50 mm seasoned wooden jambs, fixed at suitable intervals to ensure structural stability. The plywood shall be securely fastened using appropriate screws, and the exposed surface shall be finished with approved paint. Where required or directed by the Engineer-in-Charge, decorative cornices shall be provided to match the existing architectural profile. The rate shall include cost of all materials, labor, scaffolding, carriage, wastage, and complete finishing in line and level. Complete job as per site conditions and instructions of Engineer-in-Charge. I/C all carriages

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

P/l of stone soling / RBM including all carriages.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: in 1:3:6 using 40mm nominal size aggregate

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :Cement mortar 1:6 ( 1 cement : 6 coarse sand)

12mm Plaster in 1:4 mix

Providing and laying in position specified grade of 1:1.5:3 reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement.

Steel reinforcement for R.C.C. work including straightening,cutting, bending, placing in position and binding all complete upto plinth level TMTbars

P/f of bib cocks /Angle Cocks of 15mm nominal bore of qualityPVC TYPE

P/F of Flushing Cistern P.V.C. 10 litre capacity ( low level ) (White) ( with each 700.00 fittings, accessories and flush pipe)

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. railings, brackets, gates and similar works.

Providing and fixing in position collapsible steel shutters with verticalchannels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size,with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia

Providing and fixing T&G pannelling along with 12mm thick ply incl.screw, nails and applying of sprit paint over pannells CJ

Providing and fixing PPR pipes complete with fittings and clamps including cutting chases and making good the walls etc, 16 mm dia

Providing and fixing soil, waste and vent PVC pipes :Including all necesarry fittings like cowl bends/D-bends and other and fixtures.

75 mm Dia

100 mm Dia

P/f of pipes including cost of unions , sockets etc 25mm nominal bore ( Supply Line 150 Rft) OF approved brand and manufacture.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Provision for community information board and A4 size phtographs.