Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹32.5 L+₹95,927.50 (3.04%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹35.8 L+₹4.3 L (13.5%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹36.3 L+₹4.8 L (15.1%)Rejected-Finance MCB Z 2 13519 ST NO 4 GREEN AVENUE BATHINDA 151001 PB | BATHINDA | BATHINDA | PUNJAB | 151001 | L4 | Rejected-Finance Rejected | |
| 5 | L5₹37.2 L+₹5.6 L (17.9%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
17 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Faridkot
GE Faridkot Military Station
Repair/ Replacemant of Structural Elements at C Arty Bde and other Misc Locations Under AGE B/R(P-2) at Faridkot Mil Stn
2023_MES_596428_1
GE FRD-37/2023-24
Open Tender
Civil Works
Item Rate
330 days
GE Faridkot
Class D Category a i
8 documents required · 8 mandatory
₹500
GE Faridkot
₹90,000
Yes
7 Jul 2023
18 May 2023
19 Jun 2023
18 May 2023
17 Jun 2023
2 Jun 2023
Amount
Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed
Demolition of concrete (un-reinforced) in any decription and in any position not otherwise specifically providecd for complete all as specified and directed
M&L for 40mm thick, PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregates), as in flooring ,finishing surfaces even and fair without using extra cement complete all as specified and directed.
M&L for 100mm thick, PCC 1:4:8 type D2 (using 40 mm graded crushed stone aggregates), as in sub base of flooring ,finishing surfaces even and rough without using extra cement complete all as specified and directed.
M&L for hard core of gauge not exceeding 63mm using broken stone or boulders, deposited, spread and leveled in layers not exc 15cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed .
Dismantling of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed
M&L for brick work with fly ash bricks using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed .
All as per Srl item No. 07 here-in-before but except bricks complete all as specified and directed .
Taking down cement plaster from brick walls including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15 mm thick in cement mortar 1:4 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .Note : WPC will be measured and paid separately
M&L for rendering 15 mm thick in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .
M&L for Rendering 10 mm thick in cement mortar 1:3 on ceiling, finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed .
M&L for preparation of old surfaces of walls including brooming down or steel wire brushing, scrapping down smoke soot, mould, moss, efflorescent salts, trading oil and greasy spots and applying two coats of cement base paint complete all as specified and directed .
M&L for preparation of newly plastered or unplastered wall surfaces and applying two coats of white wash complete all as specified and directed .
M&L for preparation of old plastered or unplastered wall surfaces and applying two coats of white wash complete all as specified and directed .
M & L for complete removal of existing treatment of old decorated surfaces of wall by brooming down and scrapping down smoke soot, moulds, moss and efflorescent salts , treating oil and greasy spots and applying two coats of Acrylic smooth exterior paint over and including one coat of exterior primer, using hand rollar complete all as specified and directed.
M&L for preparation of newly plastered or unplastered ceiling surfaces and applying two coats of white wash complete all as specified and directed .
M&L for preparation of old plastered or unplastered ceiling surfaces and applying two coats of white wash complete all as specified and directed .
M&L for preparation of old steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed
M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc primer complete all as specified and directed
S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall with PVC clamps complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend of any radius/shoe fixed to PVC pipes complete all as specified and directed.
Taking down shutter of any description exc 2 sqm but n.exc 4sqm each & refixing the shutter in same opening including repair/welding etc complete all as specified and directed
Demolition of concrete in roof, floors, other than ground floors beams, stairs, landings, chajjas, sunken areas and similar work complete all as specified and directed.
M & L for repair of facia, parapet, slab edges, projection bottom etc using cement mortar (1:3) including necessary scaffolding, dubbing coat & scrapping of damaged/deteriorated plaster and concrete surface finished fair and even, upto 15 m ht of bldg complete all as specified and as directed.
Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material to a distance n.exc 100m from the starting point complete all as specified and specified
M&L 40mm thick brick tiles laid on lime concrete and joints grouted flush in cement mortar 1:3 mixed with 5% of crude oil by weight of cement over & including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed .
All as per Srl item No. 28 here-in-before but except brick tiles.
M&L PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in roof padding laid over chicken wire mesh of size 24 SWG, roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed.
Demolition of mud in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of ) and disposal of retrieved material to a distance n.exc 100m from the starting point complete all as specified and specified
M&L for applying evenly a tack coat of in industrial bitumen 85/25 at the rate of 1.2 kg per sq.m including cleaning surfaces complete all as specified and directed .
Supply and fix APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150gms/sqm) laid over primed surface by using forced application complete all as specified and directed. Note : (i) The treatment shall be carried out as per the manufacturers instructions and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment (iii) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer.
M&L for lime concrete 1:2:5 (Lime:surkhi:brick ballast(40mm)) terracing in roof complete all as specified and directed
M&L for rendering 10 mm thick in cement mortar 1:4 with WPC as on roof complete all as specified and directed . Note : WPC will be measured and paid separately
Supply only integral water proofing compound
S&F in repair Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .
S&F in repair Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall fixed with self tapping screws complete all as specified and directed .
S&F Roof trusses (framed), trussed, purlins, crane gantries rails and fastening and heavy bracket framing (beam, tee, angle channel or flat sections) including distance pieces, cleats etc confirmimg to Fe 290- (Gde E -165) complete all as specified and directed
M&L for fixing Joist, channel, angle, or tee sections, to be fixed independently, without connecting plates, gusset plates etc. including bending and welding as necessary,(cut to ordinary lengths) and painted one shop coat of zinc chromate primer paint and cutting holes in structural members above ground floor without cutting structural steel and making horizontal support to roof slab including all necessary arrangements, conforming to Fe290, Gde-E-165 quality-A complete all as specified and directed.
M & L for Shotcreting average thickness 40mm in RCC columns, beams and slab etc. (with mix minimum cement content of 350 Kg per Cum, M-25). Concrete having the specified minimum characteristic compressive strength (with ordinary portland cement, coarse sand and graded stone aggregates of 6mm maximum size in proportion as per design criteria) incl the cost of centering and shuttering at edges and corner etc as directed by Engr-in-Charge incl chipping of unsound/week concrete material 50mm average thickness from slabs, beams/columns etc with mannual chiesels or standard power driven percussion type or of approved make incl tapering of all edges, make square shoulder of cavities incl cleaning the exposed concrete surface and reinforcement with wire brushes and throughly washing with water and allowing it to dry etc incl removel of rust by applying approved rust remover chemical and the coating with Dr Fixit Epoxy zinc primer @ 6 Sqm per Litre at DFT of 100 micron as per specification, applying the SBR Latex based bonding agent on each layer of the shootcreting work of Dr Fixit Pidicrete URP on the entire surface complete all as directed including 5mm thick cement plaster in CM(1:3) finished even and smooth without using extra cement including removing rubbish material from building and thrown in low lying empty area at any distance upto 500 metres from the site complete as specified and as directed by Engineer-in-Charge. Make :- Sika / Fosroc/Pidilite or Techno commercial equivalent make approved by GE Note : Complete treatment to be executed by approved applicator.
S&F hard drawn steel wire fabric not exc 4kg/sqm cut to lengths, wire mesh to be fixed and firmly anchored to the concrete surface by means of 'L' shaped mild steel shear key welded with existing reinforcement including cost of material, labour, tools and plants incl welding/L-clip/tying with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.
M & L for Drilling Holes of 12mm dia up to 100 mm deep holes in structural members at the interval of 300 mm in staggered manner or along the crack line in Reinforced Concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm dia NRV (Non Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix inside the hole by applying thixotropic epoxy adhesive to ensure complete sealing and allow curing the system for minimum of 8 Hrs before Grouting including nozzle projections, excess putty, if any, over concrete element by grinding, leveling and finishing the external surface, after completion of the work, etc. complete all as specified and as directed by Engineer-in-charge.
M & L for Grouting, injecting two part, low viscosity, moisture insensitive injection liquid, based on high strength epoxy resin by pressure and using pressure epoxy injector with accessories till nozzle refused to accept the grout including mixing of grout having following properties:- (i) Mixed Density 1.1 kg/l (at +27°C); Viscosity ~ 250 mPas at +30°C and should comply according to ASTM C 881, Type II and IV, Grade-1, Class E+F (ii) Compressive strength >= 70 N/sqmm (7 days) according to ASTM C 579; Tensile Strength ~ 50 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); Tensile Modulus ~ 2000 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); (iii) Bond Strength ~ 10.8 N/sqmm (failure in concrete) after 14 days at +30°C cure; Flexural strength ~ 50 N/sqmm according to ISO 178. (iv) Seal the nozzle with thixotropic epoxy adhesive after the refusal of grout material from the nozzle. Note:- leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost complete all as specified and as directed by Engineer-in-charge. Make: Sika - SikaDur 52 LP/ Fosroc- Conbextra EP 10/ Pidilite Dr Fixit Epoxy Injection Grout or equivalent make approved by GE .
M&L for TMT bars 6 to 10mm dia , cut to length, bent to shape as required, including cranking, bending and binding with & including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .
M&L for Mild steel TMT bars 10mm dia and over , cut to length, bent to shape as required, including cranking, bending and binding with & including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .
M& L for Chipping of Plaster/Concrete Upto cover only for making better bonding in between old and new concrete including tapering all edges upto 50mm thickness complete all as specified and directed .
Supply and apply of rust remover to remove rust from existing reinforcement complete all as specified and directed . Make: Sika/ Dr Fixit/ Fosroc
M&L for applying cement mortar 1:3 over a coat of neat cement slurry @ 3kg/sqm and one coat of bonding agent as per manufacturers specifications complete all as specified and directed. Make: Dr Fixit URP , Fosroc Nitobond, Sikka Hibond
M&L for a micro concrete mixed and poured as per manufacturer specifications , of thickness 40-50mm as required and directed by Engineer-in-Charge Make: Sika/ Dr Fixit/ Fosroc Note :- A Sum of Rs. 21,335.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 21 (Schedule of credit) of Tender Documents.
BANSAL BUILDERS
NEW AMRITSAR CONSTRUCTION COMPANY
N.G BUILDERS
SHIV SHAKTI BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .