REPAIR /MAINT OF TOILETS AT VARIOUS OTM ACCN AT AF STN PALAM UNDER GE (AF) PALAN, DELHI CANTT-10

Taking down cement plaster or cement lime plaster on brick or stone walls etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed.

M&L for 12mm thick rendering using polymer modified ready-mix cement based mortar conforming to IS- 1661- 1972, IS-2250-1965, IS:2402-1963) applied in ratio (1:3) as per manufacturer's instructions on brick or concrete surfaces of ceiling including finishing surface even and fair without using extra cement complete all as specified and as directed. Make:- Ultratech / Dr. Fixit / Fosroc

M&L for 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6), to be finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4), to be finished even and fair mixed with water proofing compound by weight as per manufacturer's instructions including necessary scaffolding up to (G+3 storey) complete all as specified and as directed. Note:- WPC shall be measured and paid separately.

M&L for washed stone grit plaster (of any colour/ pattern) on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 coloured stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and as directed by Engr-in-Charge. Note:- Payment for providing grooves shall be measured and paid separately.

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete all as specified and as directed by Engr-in-Charge

M&L for removing loose, disturbed or disintegrated old concrete surfaces of RCC beam, column, lintel, slab, chhajja, pardi, railing etc, cleaning thoroughly exposed reinforcement, by sand blasting using suitable pump as directed by the GE, preparing exposed concrete surfaces to receive guniting, applying one coat of anti corrosive paint to the exposed reinforcement, supply and fixing welded wire mesh of size (100 x 100)mm of 3 mm dia wire, weight not less than 1.37 Kg/Sqm & binding with 22 guage mild steel (annealed) binding wire to reinforcement and applying pressure guniting in cement mortar (1:3), average 30mm to 50mm thickness and thereafter rendering 10mm thick plaster in cement mortar (1:3), mixed with water proofing compound @ 2% by weight of cement and finishing the surfaces even and smooth without using extra cement to match with the existing surfaces, removing the debris outside MD land including material and labour for necessary scaffolding and formwork (G+3 storeys) and safety arrangement for guniting work complete all as specified and as directed. Note:- The finish of the surfaces shall be matched with the existing surface. WPC shall be measured & paid separately under respective item as supply only.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending separately for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

S&F 5 to 10mm dia TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends, as in stirrups and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

Supply only Integral Water Proofing compound complete all as specified and as directed.

M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of white wash complete all as specified and as directed.

M&L for preparing old surfaces on ceilings including brooming down, mechanically scraping down and applying two coats of white wash complete all as specified and as directed.

M&L for preparing plastered or unplastered new surfaces on walls and applying two coats of exterior emulsion paint 100% acrylic white or coloured complete all as specified and as directed.

M&L for preparation of plastered or un plastered old decorated surfaces of walls removal of nails etc & filling cracks/hole by applying cement base wall care putty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of exterior emulsion paint 100% acrylic white or coloured complete all as specified and as directed. Note:- The work shall be carried out upto four storey building. Necessay scafolding upto four storey building shall be deemed to be included in unit rates.

M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron surfaces of any description not otherwise described over 10cm width & girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Disconnecting existing water tank of any description n. exc 500 litres capacity in any position, setting aside for repairs, cleaning and removing all scales, dirts etc from tank and mouth of circulating pipes etc and re-fixing in position with and incuding 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminum rod complete all as specified and as directed.

Disconnecting existing water tank of any description exc 500 litres and n exc 1000 Ltr capacity in any position, setting aside for repairs, cleaning and removing all scales, dirts etc from tank and mouth of circulating pipes etc and re-fixing in position with and incuding 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminum rod complete all as specified and as directed.

S&F sheet glass 3mm thick, ordinary quality and glazing with oil putty / wooden beads in square or rectangular in section n exc 0.5 sqm in each pane including hacking out old broken glass complete all as specified and as directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples including taking down old steel wire cloth complete all as specified and as directed.

S&F figured glass pin head type 4mm thick n exc 0.5 sqm and glazing with oil putty, including hacking out old broken glass complete all as specified and as directed.

M&L for special treatment for sunken portion of WCs / Bath & toilet etc executed in following stages:- Stage 1: Providing 15mm thick plaster in CM (1:3) mixed with water proofing chemical of Dr.Fixit or Shalicrete 'R' of STP Ltd in the proportion/quantity all as per manufacturer's instructions. State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces. Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufactuer's instructions. Stage 4: Laying fibre glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky. Stage 5: After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturer's instructions. Stage 6: Providing 10mm thick protective plaster in CM (1:3) mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturer's instructions. Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES :- (i) Mode of measurement shall be actual area treated (floor and adjoining walls).

Demolition of stone slabs and tiles laid beded and pointed in any mortar of any description or thicknes as in floors, aprons etc complete all as specified and as directed.

M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n. exc. 0.11sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces, laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.

M&L for joint free coloured glazed ceramic tiles as in vertical surfaces of size (300 x 200)mm x 7mm hick / (450 x 300)mm x 7mm thick set and jointed in cement slurry and pointed in white or coloured cement to match laid over & including 15mm thick cement rendering in cement mortar (1:4) complete all as specified and as directed.

M&L for dark coloured / printed / highlighter ceramic tiles (digital first quality) of size (300 x 600)mm x7 to 8mm thick digital ceramic tiles as on vertical surfaces such as skirting, dado etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick ready-mix cement based mortar adhesive for fixing tiles and stone approved brand etc complete all as specified and as directed.

Taking down AC, PVC pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.

Taking down CI pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.

Description all as per ser item No. 31.00 above but 75/80 mm dia pipes complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints complete all as specified and as directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps at one meter of interval complete all as specified and as directed.

S&F PVC (SWR) bends of radius, suitable for 110mm dia PVC pipes fixed complete all as specified and as directed.

S&F 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to floor/ walls including suitable clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and as directed.

S&F 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls/floor etc with cement joints fixed to wall /floor etc complete all as specified and as directed.

S&F CI 100mm bends with door complete all as specified and as directed.

S&F cast iron floor trap with grating including jointing to waste pioe fixed in cement concrete (1:2:4) type B1 of size 100mm including jointing with salvent cement 75 mm dia out let incluidng grating complete all as specified and as directed.

Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris out side defence land from the site complete all as specified and as directed.

Taking up or down 15 to 25 mm steel tubing and connections in walls, ceilings, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.

S&F tubes, medium gade 15mm dia, galvanized with all fittings and fixed complete to walls and ceiling or laid in foors complete all as specified and as directed. (concealed type).

S&F GI tubing, 20mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F GI tubing, 25mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and as directed.

Dismantling water tanks exc 250 ltr & n exc 500 ltr capacity and removing to store complete all as specified and as directed.

Dismantling water tanks exc 500 ltr & n exc 1000 ltr capacity and removing to store complete all as specified and as directed.

S&F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), white colour three layered, hoisted and fixed in position with and incuding 20mm bore ball valves high pressure of PTMT with epoxy coated aluminum rod complete all as specified and as directed.

S&F 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), white colour three layered, hoisted and fixed in position with and incuding 20mm bore ball valves high pressure of PTMT with epoxy coated aluminum rod complete all as specified and as directed.

S&F in repairs 20mm bore ball valves high pressure of PTMT with epoxy coated aluminum rod & high-density plastic ball, screwed for iron pipe and fixed (minimum weight 210 gms) complete all as specified and as directed.

S&F in repair WC Orissa pattern white with integral foot rest of size (580x440)mm including trap set, PCC bed and making good disturbed floor connecting to flush pipe and incuding 10 litres capacity PVC valveless symphonic action type flushing cistern complete all as specified and as directed.

S&F in repairs vitreous china wash hand basin coloured of oval tiffany shape minimum of size 550mm x 400mm, with and including bottle trap chromium plated heavy duty 32 mm dia, PVC connection of 15mm dia & 450mm long with PTMT nuts, 15mm bore basin mixer long swan neck cast copper alloy chromium plated high pressure and 32mm dia brass waste fitting complete all as specified and as directed.

S&F in repairs vitreous china ware wash hand basin, white, flat back of size (550 x 400)mm including brackets, cutting for and pinning in ends of brackets or erecting stand including brass CP union/waste fitting of 32mm dia and discharge pipe of 32mm dia PVC of 1.0 m length, 15mm bore pillar tap long swan neck cast copper alloy chromium plated high pressure with all fittings etc complete all as specified and as directed.

S&F in repairs vitreous china urinals half stall type white or coloured with grating and union for discharge pipe and including chromium plated spreader suitable for 15mm bore pipe, provision of 40mm bore PVC waste pipe complete all as specified and as directed.

M&L for granite (18-20mm thick) work in counter for cooking & W.H.B platform including rounding and grinding of edges and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite including cutting for hole, rounding of edges and mirror polishing complete all as specified and as directed. Note:-(a) Unit rate includes raking, circular cutting or notching and waste on granite. (b) This item shall be used in W.H.B Counter top /cooking platfom Counter top etc

S&F in repairs for PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed by Engineer-in-Charge.

S&F gunmetal globe or gate valves, 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F gunmetal globe or gate valves, 25 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 10 litres capacity PVC valveless symphonic action type flushing cistern (Economy dual flush) low level, white, with inlet, ball valve, float and handle including brackets and brass CP flush pipe long band complete all as specified and as directed.

S&F in repairs 15 mm dia long body bib taps fancy type cast copper alloy chromium plated handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F in repairs 15mm dia type pillar taps swan neck fancy type, cast copper alloy, with capstan head, chromium plated, screwed down, high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.

S&F in repairs 15mm bore CP angular valve (fancy type), screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repairs 15mm bore concealed stop cock long shank and long threading chromium plated, screwed down to iron pipes, high pressure complete all as specified and as directed.

S&F CI 100mm single branch piece with door complete all as specified and as directed.

S&F CI 75mm bends with door complete all as specified and as directed.

S&F cast iron cowls 100mm size complete all as specified and as directed.

S&F in repairs, salt glazed stone ware gulley traps (150 x 150)mm size square mouthed type ‘P’ including CI cover complete all as specified and as directed.

Supply and fixing in repairs brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

Demolition of concrete in ground floor and pavings n exc 15cm thickness below or above ground level complete all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC, PVC, reinforced concrete any type etc), set in cement mortar, upto 200mm internal dia complete all as specified and as directed. Note : including rate of Excavation in trenches as required at site.

M&L for unplasticisted PVC drainage pipe 160mm dia type 'B' with wall thickness 4mm (min) of pressure rating 4 KN/Sqm laid in tranches and jointed with cement solvent including testing complete all as specified and as directed. Make:- Jain Pipes / Ajay flowgaurd / Astra pipes

M&L for unplasticisted PVC drainage pipe 200mm dia type 'B' with wall thickness 4mm (min) of pressure rating 4 KN/Sqm laid in tranches and jointed with cement solvent including testing complete all as specified and as directed. Make:- Jain Pipes / Ajay flowgaurd / Astra pipes

M&L for 100mm thick concrete bed to drain pipes in cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and as directed.

M&L for 100mm thick concrete bed to drain pipes in cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) including packing under and haunching against the sides of pipes after they are laid and tested for 200 mm bore pipe complete all as specified and as directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete etc, complete all as specified and as directed.

M&L for PCC (1:3:6) type C-2 (using 40mm graded stone aggregate) as in surface channel, drain and manholes complete all as specified and as directed.

M&L FOR PCC (1:2:4) Type B-1 (using 20mm graded stone aggregate) as in benching, coping including necessary use and waste of form work complete all as specified and as directed.

M&L for PCC (1:2:4) type B-2 (using 40mm graded crushed stone aggregate) as in surface channel, drain and bedding including necessary form work and weathering, slightly rounded or chamfered angles complete all as specified and as directed.

M&L for providing reinforcement cement concrete nominal mix (using 20mm graded stone aggregate) type B-1 (1:2:4) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal or sloping) complete all as specified and as directed.

Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.

M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) but except bricks complete all as specified and as directed.

M&L for brickwork with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, in half brick thick wall built in CM (1:4) complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each and removing from site and making good the disturbed protion in CM (1:3) or PCC (1:2:4) type B1 complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm but not exc 4.00 Sqm each and removing from site and making good the disturbed protion in CM (1:3) or PCC (1:2:4) type B1 complete all as specified and as directed.

S&F solid PVC door frame of size (50mm x 47mm) made out of 5mm wood grain printed PVC sheet used instead of plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

S&F PVC flush door solid panel fancy type both side with teak wood finish 30mm thick consisting of panel of hollow PVC profile of 24mm thickness, consisting of frame made out of MS tubes of 19 gauge thickness and size (19mm x 19mm) inserted inside the hollow section of stiles, top and bottom rails and two (19mm x 19mm) MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mm x 2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant prelam PVC sheet using solvent cement on both the sides of the panel etc. incuding stainless steel 3 Nos hinges 100mm, 2 Nos handle 150mm, 2 Nos tower bolt 150mm etc each leaf complete as per direction of Engineer-in-Charge, maufacturer's specification and drawing complete all as specified and as directed.

S&F 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid moulded WPC door shutter of 30mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (edge), minimum compressive strength 50 N/sqmm, modulus of elasticity 850 N/sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless screws, incuding stainless steel 3 Nos hinges 100mm, 2 Nos handle 150mm, 2 tower bolt 150mm etc each leaf complete all as specified and as directed.

S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other frames/ chowkhat of size (45 x 85)mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/sqmm, modulus of elasticity 900 N/ sqmm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ stainless steel dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note:- (a) MS hold fast/ lugs or SS dash fasteners shall be paid separately. (b) For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and as directed.

S&F windows & ventilators fabricated from rolled formed GI section made of galvanised steel colour coated (PPGI Sheets) (base steel as per IS 513 ‘’D’’ quality). Galvanised as per IS 277 with Zinc of 120 gms/Sqm. PAINT: Pre-Painted sections should be with primer coat of epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyl backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. GI Section of 0.58mm thick in double rebate windows in which both glazed shutter and flymesh shutter, (75 x 58)mm outer frame, mullion (74 x 53)mm, glazed shutter (52 x 50)mm, flymesh (42 x 21)mm, beading for glass fixing (12 x 12)mm in fixed portion and the outer frame and mullions to have rebate for glazed/gauzed shutters the sections cut to length mitred joined with corner PolyVinylChloride brackets centre mullion fixed with Poly vinyl chloride mullion caps. Glass of 4mm thick plain float glass fitted with rubber gasket in glazed shutter and wiremesh of stainless steel of 36 guage to fix mesh in mesh shutter using VC gypsum drywall screws and spoon profile of 0.58mm GI sheet. Corners of the windows should be joined with corner brackets made of poly vinyl chloride with CRCA of zinc phosphate coat. Each glazed shutter and fly mesh shutter shall be provided with SS Pivot Hinges 2 in each, Poly Vinyl Chloride handle 1 in each and Powder coated Peg stay in Glass shutter. Window shall be provided with enamel paint MS Grill/Guard Bars made of 10mm horizontal MS square bar welded to 6 x 12mm MS Flat at with holes at both vertical ends. Gap between the bars should not be more than 152mm. Window frames shall be fixed to brick / concrete masonry by using nylon self expansion caps & 75/100mm MS screws after drilling in walls. VC Gypsum drywall screws should be used while fixng corner brackets, stay, hinges, mullion caps of windows Type-4000 series ref drg No CEAF/STD-191/2014 SH1/2&2/2 complete all as specified and as directed.

M&L for 75mm thick cement concrete (1:3:6) type C1, (using 20mm graded stone aggregate) as in plinth protections, to be finished even and smooth without using extra cement complete including use and waste of necessary form work complete all as specified and as directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed with and incuding taking down any type of sheet complete all as specified and as directed.

S&F PPGI pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to fix the wall fixed with self taping screws with and incuding taking down any type sheet complete all as specified and as directed.

S&F mild steel angles/rectangular hollow section/steel tubular roof trusses (framed), purlines crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified including applying two coats of synthetic enamel paint over & including a coat of red oxide primer complete all as specified and as directed.

M&L for machine pressed, glossy finished 25 mm thick coloured cement concrete chequered tiles of size (300mm x 300mm) of pattern as approved set, jointed and pointed in neat cement slurry and pointed in floors, laid over cement screed bed of 15mm thick in cement mortar (1:6) including over 75mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed by Engineer-in-charge.

S& F glossy finished machine pressed precast concrete interlocking paver block any shape and size, with grey cement and pigment to match, conforming to IS 15658-2006 of 60mm thick M-35 grade with and including over 50mm thick sand cushioning over and incuding 75mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed by Engineer-in-charge.

S&F precast cement concrete designer tiles 22 to 25mm thick glossy finish, heavy duty of approved brand and manufacturer of required shape and size (Orit Design of mid green or dark green shade) over 15mm thick screed bed in CM (1:6) including pointing the joints with ready mixed pointing material including 75mm thick cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and as directed by Engineer-in-charge.

Cleaning of blocked floor/Nahani trap and CI pipe upto 1st manhole and removing all silt, residue sludge both organic and inorganic nature including any type of foreign materials and removing waste materials/ sludge etc to a distance exceeding 50mtr and sealing the sides of traps in bath room/kitchen using Aqua TS of Aqua shield water proofing or equivalent complete all as specified and as directed by Engineer-in-charge. Note:- Any damage caused during cleaning shall be made good by contractor to the entire satisfaction of Enginner-in-Charge.

Cleaning of blocked WC trap and CI pipe upto 1st manhole and removing all silt, residue sludge both organic and inorganic nature including any type of foreign materials and removing waste materials/ sludge etc to a distance exceeding 50mtr complete all as specified and as directed by Engineer-in-charge. Note:- And damage caused during cleaning shall be made good by contractor to the entire satisfaction of Enginner-in-Charge.

De-silting and cleaning of sludge of sewage line 100mm to 350mm bore of any description under ground any depth, removing any type of bloakage including desilting, descaling and de-chocking from drain as well as from manhole with combined high pressure water jetting cum suction (vaccum) type machine mounted on LCV/HCV having facility of high pressure vaccum including provision of hydraulic application through high pressure thermoplastic fibre based water jetting hose and through conical round shaped nozzle pipe and flushing after cleaning, sludge water shall be desposed off including taking of manhole cover and refixing the same after cleaning complete all as specified and as directed by the Engr-in-Charge.

De-silting and cleaning of sludge of manholes n. exc 1.0 m deep and removing sludge/waste materials etc to a distance n. exc 50m and burrying in pits and re-filling the same complete all as specified and as directed by the Engr-in-Charge. Note:- The cost for excavation and earth work for pits is deemed to be included in the unit rate.

S&F in repairs, SFRC drain cover of size (1000mm x 500mm) x 70mm thick laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete.(b) M/s KK Manhole.(c) Or equivalent

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. any type complete all as specified and as directed.

Taking down ceiling fan /exhaust fan, sealing cable end, dismantling blades and removing fan and blades to store yard complete all as specified and as directed.

Taking down unservesiable sub main wiring with conduits/battens etc complete all as specified and as directed.

M&L for point wiring with single core PVC insulated unsheathed 1.5 sqmm FRLS multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories suitable for mounting modular switches including modular metal flush box and modular face plate with frame for mounting switches, sockets, fan regulators, etc and earth wire single core PVC insulated but unsheathed multistranded copper conductor cable 1100 volts grade IS-694 marked 1.5 sqmm FRLS cable as continuous earth wire connecting to common earth dolly in concealed wiring system includes cutting of chases and making good disturbed surfaces complete all as specified and as directed for the following :- (a) One light/fan point controlled by one switch one way

(b) One 3 pin 5 Amps socket out let point on the same board controlled by one switch complete all as specified and as directed.

(c) One socket outlet 5 Amp controlled by one switch on independent board complete all as specified and as directed.

All as per Srl item No 109.00 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sq mm stranded copper conductor cable PVC insulated including earth wire 2.5 Sq mm copper conductor cable connected to earth dolly complete all as specified and as directed.

M&L modular switch 1 way 6 Amps 1 module complete all as specified and as directed.

M&L modular switch 1 way 16 Amps 1 module complete all as specified and as directed.

M&L modular socket outlet 6A, 2/3 pin combined 2 module complete all as specified and as directed.

M&L modular socket outlet 6A/16A, 2/3 pin combined 2 module complete all as specified and as directed.

Supply and fixing ceiling rose, surface type, 65mm x 50mm, 2 to 3 terminal complete all as specified and as directed.

S&F LED light fitting 1x9W / 1X10W bulk head luminaires with and including LED light driver holder connecting up with three core flexible copper complete all as specified and as directed.

Supply and fixing exhaust fan, steel body AC single Phase 230V of size 300mm sweep, 1350 RPM with blades, and frame and louvers conforming to relevant latest IS including anchor fasterner -04 Nos complete all as specified and as directed. Make:- Bajaj Maxair, Crompton Greaves Trans Air, Havells ventilair,

Supply and fixing environment friendly indoor decorative 20 watt LED for wall mounted 20 Watt LED batten, extruded aluminium heat sink provided for heat dissipation and integrated electronic driver back plate suitable for batten fittings complete all as specified and as directed.

Supply and fixing environment friendly indoor decorative mirror LED light fitting 1x10 watt with opal diffuser including all accessories suitable for batten fittings complete all as specified and as directed.

M&L for sheet metal enclosure for DBs 8 way double door type with 200 amps rated busbar SPN including necessary connection complete all as specified and as directed. Make:- Havells/C&S/legrand/L&T

Supply and fixing MCB, SPN, 40-63 Amp,10 kA complete all as specified and as directed.

Supply and fixing MCB, SP, 5-32Amp,10 kA complete all as specified and as directed.

Material and labour for submain wiring with two single core 4.00 sqmm PVC insulated FRLSH multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 4.00 Sqmm multistranded copper conductor cable as continuous earth wire complete all as sepcified and as directed.

Supply and fixing electric water heater (geyser) storage type with inner tank with glass lined coating and heating element heavy duty 2 KW capacity 25 litre, BEE 5 Star rated Engineered for hard water complete with all accessories such as pressure safety relief valve, thermostat, NRV, connection piece (steel armoured - 02 Nos) etc conforming to relevant latest IS including anchor fasterner - 04 Nos complete all as specified and as directed. Make:- Bajaj Shield Series Immorto, Crompton Amico Pro25, Havells Greta Pro 25L,

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20-32 Amps 'C' series complete all as specified and as directed.

M&L for earthing complete with galvanised earth plate electrode of size (600 x 600)mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level, the earth plate surrounded by a mixture of charcoal dust and salt to a packed thickness of 150mm on all sides with and including necessary excavation earth work returning filling in and removal of surplus spoil up to 50 mtr including GI wire 4 mm dia bolted and riveted to earth plate at one end in and connected to continuous GI earth wire encased in and including 15 mm GI light grade pipe with all fittings from top edge of earth plate complete all as specified and as shown in electrical plate no 3 including testing on completion.

Supply and laying XLPE LT 1100 Volt grade, armoured under ground cable size of 16 Sqmm 2 core with stranded aluminium conductor in trenches /passing through pipes/ on poles etc with and incl taking out unserviceable cable complele all as specified and as directed. Note:- Necessary excavation, earth work and protection of cable shall be measured and paid seperately.

Excavation of soft/loose soil in trenches not exc 1.5 meter wide & not exc 1.5 mtr in depth, for foundation etc or for manholes, laying of pipe in any type of soil and getting out complete all as specified and as directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified and as directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L for dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable complete all as specified and as directed by Engr - in - Charge.

M&L for old size sub class ‘B’ bricks, laid in trenches as cable covers complete all as specified and as directed.

S&F in replacement of LED street Light fittings 60 Watt 230V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, GI pipe light grade 32mm dia bracket to make L type & MS flat clamp of size 30mm x 5mm thick including nuts, bolts and washer suitable for bldg light fitting with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection complete all as specified and as directed.

Please Enable Macros to View BoQ information