REPAIR AND REPLACEMENT OF STEEL AND WOODEN FURNITURE ITEMS AT SEVOKE MIL STN UNDER GE SEVOKE ROAD

TEAPOY VERANDAH FD/ MAP FD-255/ FD/E6/MAP/17

Removing old existing unsv top from Teapoy verandah and supply and fixing the new top of same size made out of 18/19mm thick pre laminated MDF board exterior grade duly provided with 4mm hardwood beading all around all as directed by Engr-in-charge.

Replacement of unserviceable flat iron frame with flat iron 25mm x 5 mm thick of required size as per drg. The fixing and finishing shall be done in accordance with drawing specifications.

Welding to broken joints of Teapoy verandah all as directed .

S&F in replacement PVC shoes to Teapoy verandah complete all as shown on drg and as directed.

Note : 1. Removal of following existing unserviceable steel components of various MES pattern furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, welding, glueing, providing hinges placing everypart in-tact condition as per drgs. 2. Cleaning Derusting of Stain/Dirt with Sand Paper making the Surface smooth,filling the holes with Putty wherever required and Applying two coat of Synthetic enamelled paint(Colour of paint as per approved by Engr-In-Charge/GE) over a Red Oxide Primer for steel items direected by Engineer-in-Charge/GE. 3. Work will be executed where the furniture exist in different User Units of GE Sevoke Road including BSO's Furniture Yard as directed by Engineer-in-Charge/GE.

CHARPOY IP HARD TOP FD/MAP-II/01

Removing old existing unsv Plytop from Charpoy IP hard top and S&F of new 12mm thick plytop of suitable size, ISI marked, BWR Grade commercial plywood of unpolished edging of approved quality all as shown on drawing and as directed. (Make of Plywood : Kitply(Vista)/Century/Greenply/National plywood/Archid ply(Gold)).

S&F in replacement hard rubber shoes at the bottom of leg all as shown on drg.

Welding to broken joints/ fixing bt nut bolts of bed hard steel all as directed .

TABLE COOK HOUSE/PANTRY STEEL FD-1019 & FD-1020

S & F Top using 25mm thick polished stone slab kotah/chitor black/ dholpur.

Supply hard rubber/PVC shoe to the bottom of each leg.

MS Square pipe for frame whereever required by welding and preparation of surface of table and apply one coat of synthetic enamel paint OG (Make-Assian/Berger/Nerolac) to steel frame , complete all as specified and shown on drg.

BED HARD STEEL FD/E6/MAP/08 ®

Removing old existing unsv Plytop from Bed Hard and S&F of new 12mm thick plytop of siutable size, ISI marked, BWR Grade commercial plywood of unpolished edging of approved quality all as shown on drawing and as directed. (Make of Plywood : Kitply(Vista)/Century/Greenply/National plywood/Archid ply(Gold)).

Removing old existing unsv board from head board and S&F new board made of 18 mm thick prelaminated MDF board both side teak faced having 04 mm thick teak wood beading all around. All as per size and design shown on drawing and as directed.

All as per Sr.item No. 4.02 here-in-before but foot board.

S&F in replacement hard rubber shoes at the bottom of leg all as shown on drg.

Welding to broken joints/ fixing bt nut bolts of bed hard steel all as directed .

STOOL STEEL REVOLVING (ADJUSTABLE) HFD-2021

Supply and fix revolving top made out of Stainless steel thali 22 guage 300mm dia complete all as specified and shown on drg

Supply hard rubber shoes to the bottom of each leg.

MS tubular legs of CRCA quality of 18 swg and Stainless steel of 18 Swg for frame whereever required by welding and preparation of surface of stool and apply one coat of synthetic enamel paint white (Make-Assian/Berger/Nerolac) to steel frame , complete all as specified and shown on drg.

CHARPOY GI PIPE 25 MM WITH PLYTOP FD-220

Removing old existing unsv Plytop / Newar from Charpoy and S&F of new 12mm thick plytop of siutable size, ISI marked, BWR Grade commercial plywood of unpolished edging of approved quality all as shown on drawing and as directed after Fixing of 2 x ISI Specified MS Iron Strip of 4 mm thickness x 50mm width duly welded at equal distance across the long rail for fixing of plywood . (Make of Plywood : Kitply(Vista)/Century/Greenply/National plywood/Archid ply(Gold)).

Removing old existing unsv long rails and S&F new long rail as per existing shape and size as per drg.

Conversion of short rails obtained from Ser No 6.02 above in to short rails as per existing shape and size as per drg..

Conversion of legs obtained from Ser No 6.03 above in to leg as per existing shape and size as per drg..

Nut & bolts as per existing shape and size and as per drg.

Washers as per existing shape and size and as per drg.

GI elbow 3 way 32mm dia as per existing shape and size and as per drg.

LOCKER BED SIDE STEEL FD-1029

Replacement of of unsv Handle and S&F New Handle including Nut and Bolt with Washer complete as per existing shape ,size and as per Drg.

Replacement of unsv Butt Hinges and S&F New Butt Hinges complete as per existing shape ,size and as per Drg.

Replacement of unsv Hasp and Staple and S&F New hasp and staples complete as per existing shape ,size and as per Drg.

Replacement of unsv Hanging Rod of conduit Pipe and S&F New Hanging Rod with bracket complete as per existing shape,size and as per Drg.

Replacement of unsv /Rusted Shelves of Locker Bed side steel and S&F New Shelves dully Painted complete as per existing shape ,size and as per Drg.

Adjustment of existing shelves by providing New clamps/clips after removing the old unsv clamps/clips as per existing shape,size and as per drg.

PAINTING :- M&L for two coats of paint by means of spray painting machine with synthetic enamelled paint of appropriate shade as dedcided by Engr-In-Charge/GE and quality to steel furniture items (internally & externally complete) including removing of dents & filling with putty after preparation of surfaces thoroughly by using appropriate abrasive cloth emery 1 grinder machine as required as trade practice complete all as specified and as directed by Engineer-in-Charge to the following steel furniture items :-

Teapoy Verandah FD–255/MAP

Charpoy IP Hard Top FD/MAP-II/01

Table cook House/Pantry Steel FD-1019

Bed Hard Steel FD/E6/MAP/08 (R)

Stool Steel Revolving (Adjustable) HFD-2021

Locker Bed Side Steel FD-1029

SIDE BOARD FD-241

Removing of old unserviceable top from side board and supply & fixing new top made out of 19mm thick Pre-laminated MDF board exterior grade phenol formaldehyde one side teak veneered & other side having balancing white lamination complete all as specified and shown on drawing & directed by Engr-in-Charge.

Taking down old unserviceable shutters from side board and supply & fixing new shutters made out of 18/19mm thick pre-laminated MDF board exterior gde one side teak veneered & other side having balancing white lamination including fixing of teakwood beading all around the with 19x6mm fixed with MS hinges 75mm long complete all as directed & shown on drawing.

Taking out old unserviceable plywood back from side board and supply & fixing new plywood back of 6mm thick commercial gde of approved quality complete all as directed & shown on drawing.

Taking out old unserviceable drawers from side board and supply & fixing new drawers made out from 6mm thick plywood commercial gde & 12mm thick teakwood plank as approved complete all as directed & shown on drawing.

Taking out old unserviceable legs from side board and supply & fixing new legs made out of well seasoned teakwood complete all as directed & shown on drawing.

Removing of old unserviceable sides of side board and supply & fixing new side made out of pre-laminated particle board one side teakwood finish as approved quality complete all as specified & shown on drawing.

Supply & fixing of 35mm round brass knob to the shutters & drawer of side board complete all as specified & shown on drawing.

Removing of old unserviceable locks from the shutters of side board and supply & fixing new locks brass body 4 levers 40mm with duplicate keys complete all as directed & shown on drawing.

Supply and fix only 75 mm butt hinges brass medium weight of approved quality complete all as directed & shown on drawing.

TABLE DRESSING GENTS WITH MIRROR FD -230

M & L for carrying out repair/replacement of following parts of Table Dressing Gents With Mirror as per drawing after dismantling the old parts complete all as specified :- Top and side complete using 18/19mm thick pre-laminated MDF board ISI Marked Make (Archid/Novapan/ECCO) exterior grade and 6mm thick Teak wood beading all around.

Bottom portion using 19mm thick Teak veneered (one side) commercial ply (other side) particle board decorated with phenol formal dehide Make (Archid/ Novapan/ECCO) including 4mm thick teakwood beading.

Side and back of drawers using 12mm thick teak wood plank, bottom of drawer using 6mm thick commercial plywood, Front of drawer using 19mm thick commercial particle board over which 1.5 mm thick plastic laminated sheet is fixed and 3mm thick teak wood edging to be provided at all round of front of drawer.

Supply and fixing Chromium plated knobs for drawers.

Suuply and fixing mirror 5.5mm thick electro copper plated of polished plate(Make:Saint Gobain/Atul/modiguard) with frame of Teak wood and back ply all as shown on Drg.

Applying two coat of french polish (ready made) to article after necessary preparation of surfaces.

TABLE BED SIDE FD-276

Repair/replacement of following parts of Table bed side as per drawing after dismantling the old parts complete all as specified :- Leg using Teak wood (MP Teak) .

Side using 12 mm thick MDF bd with one side teak finish. Make (Kit ply/Duro/Green ply).

Back using 6 mm thick ply wood commercial Make(Kit ply/Duro/Green ply).

Bottom using 12 mm thick ply wood commercial Make (Kit ply/Duro/Green ply).

Shelve using 12 mm thick ply wood commercial Make (Kit ply/Duro/Green ply).

Top using 12mm thick pre-laminated MDF board ISI Marked Make (ECCO/Archid/Novapan) exterior grade and 6mm thick Teak wood edging all around.

Applying two coats of French polish (ready made) to article after necessary preparation of surfaces .

MIRROR DRESSING GENTS FD-52M/MAP

M & L for carrying out repair/replacement of following parts of Mirror with shelf as per drawing after removing the old unservicable parts complete all as specified :- Supply and fixing shelf of 18mm thick prelaminated particle board Make (Archid/Novapan/ECCO) ISI marked exterior grade and 6mm thick Teak edging all around.

Supply and fixing mirror 5.5mm thick electro copper plated of polished plate(Make:Saint Gobain/Atul/Swastik) with frame of Teak wood, back ply and hanging arrangement.

Applying two coat of french polish to complete article with shelf after necessary preparation of surfaces.

CHAIR DINING FD- 279

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made out of 1st class hard wood (teak) with nails of appropriate size. Rest all as shown on drg and as directed by the Engineer-in-Charge.

All as 13.01 above front leg

All as 13.01 above side rail

All as 13.01 above front/ back rail

All as 13.01 above stiffner

All as 13.01 above back strip

S & F new hard PVC/rubber shoe/ring of superior quality fixing with suitable screws to the bottom of leg. Rest all as shown on drg and as directed by Engr-in-charge.

Recanning of chair dining with 2mm wide plastic cane in Godrej pattern all as shown on drawing.(Make of cane shall be Ajay/Binny/ Shah/ Premier)

CHAIR DINING JCO/ORS FD/MAP-II/05

M&L for removal of old existing unsv PVC seat of chair, S&F new PVC seat 4mm thick with holes screwed with rails and S&F 2 Nos of stiffner on back side of seat all as specified in drg and as directed by the Engineer-in-Charge.

M & L for replacement of back leg made of 1st class hard wood (teak) with nails of appropriate size. Rest all as shown on drg and as directed by the Engineer-in-Charge.

All as 14 .02 above front leg

All as 14.02 above side rail

All as 14.02 above front/ back rail

All as 14.02 above stiffener

All as 14.02 above wooden back strip

S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

CHAIR WRITING FD-280

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak) all as shown on drg, specified and as directed by the Engineer-in-Charge.

All as 15.01 above front leg

All as 15.01 above side rail

All as 15.01 above front or back rail

All as 15.01 above back strip

All as 15.01 above arm rest

All as 15.01 above stiffner

S & F new hard PVC/rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

Recanning of chair writing with 2mm wide plastic cane in Godrej pattern all as shown on drawing.(Make of cane shall be Ajay/Binny/ Shah/ Premier)

CHAIR EASY FD-229

M&L for removal of old existing unsv back leg of chair in any position, S&F new back leg made of 1st class hard wood (teak) all as shown on drg, specified and as directed by the Engineer-in-Charge.

All as 16.01 above front leg

All as 16.01 above side rail of seat frame

All as 16.01 above front or back rail of seat frame

All as 16.01 above side rail of back frame

All as 16.01 above top or bottom rail of back frame

All as per item No 16.01 above but replacement of arm rest

S & F new hard PVC/ rubber shoe/ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

Recanning of chair writing with 2mm wide plastic cane in Godrej pattern all as shown on drawing.(Make of cane shall be Ajay/Binny/ Shah/ Premier)

PEG TABLE FD-384

Removing of old existing unsv top from peg table and S&F new top made out of 18/19mm thick exterior grade pre laminated MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood).

Replacement of old existing unsv leg from existing peg table and S&F the same size new leg made out of Ist class hard wood (Teak) to Peg table duly french polished all as shown on drawing and as directed by Engineer-in-Charge.

All as per 17.02 but long top rail.

All as per 17.02 but short/ bottom rail.

All as per 17.02 but stiffener of Peg table.

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TEAPOY FD- 382

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood).

All as 18.01 above but leg made of 1st class hard wood(teak)

All as 18.01 above but long rail

All as 18.01 above but short rail

All as 18.01 above but stiffner

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

TABLE DINING (JCOs/ORs) 4 PERSON 1200 X 900 MM FD/MAP-II/03

M&L for removal of old existing unsv top of table in any position, S&F new top made out of 18/19mm thick exterior grade MDF board (ISI marked) all as directed by Engineer-in-charge. (Make:- Green panel max/ Century/ Archid Ply/National Plywood) for Table dining 4 persons.

All as 19.01 above but S&F new leg made of 1st class hard wood

All as 19.02 above but long rail

All as 19.02 above but short rail

All as 19.02 above but support stiffner

S& F new bracket of size 100 x 100 x 35 mm made of 1st class hard wood and fixing with 02 Nos suitable size steel screws complete as directed by Engr-in-charge

S & F new hard PVC shoe/ ring of superior quality with suitable screws for fixing complete all as shown on drg and as directed by Engr-in-charge.

POLISHING OF WOODEN FURNITURE

Material and labour for removing/scrubbing of all old polished surfaces by using grinding machine & sand paper/ emary paper etc, including filling of cavities by putty/filler/sealer, preparation of old wooden surfaces by applying seina/burnt seina in uniformally and and applying two coats of french/Lacquere polish using spray machine to obtain glossy finish to the following wooden furniture items complete all as specified and as directed by Engg-in-Charge.

Chair Dining FD - 279

Chair Dining JCO/Ors FD/MAP-II/05

Chair Writing FD - 280

Chair Easy FD-229

Peg Table FD- 384

Teapoy FD– 382

Table Dining 4 Person (1200x900x760mm) FD -273/ FD /MAP-11/03

Side board FD -246

Notes for all items : Quoted rate shall include the followings:- 1. Removal of existing broken and unserviceable steel/wooden components of various MES pattern furniture items carefully without disturbing the adjoining parts and supply and fixing new components in lieu of dismantled components including tightening the joints, screwing, welding, glueing, providing hinges placing everypart in-tact condition as per drgs. 2. Cleaning, derusting of Stain/Dirt with Sand Paper making the surface smooth,filling the holes with putty wherever required and applying two coats of Synthetic enamelled paint(Colour of paint as per approved by Engr-In-Charge/GE) over a Red Oxide Primer for steel items replaced as directed by Engineer-in-Charge\. 3. Work will be executed where the furniture exist in different User Units of GE Sevoke Road including BSO's Furniture Yard as directed by Engineer-in-Charge.