Loading
Loading…
Loading…
Tender Value
₹1.9 Cr
EMD Value
₹2.5 L
Closing Date
25 Feb 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
OS/EL/C/JP
14 conditions · 3 needing a document upload
"Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or ""V"" whichever is less crores; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIII, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. "
Only such tenderer(s) who satisfy the following eligibility criteria shall be considered:- The Contractor should have valid Electrical Contractor License issue by Govt. and submit along with tender document if valid Electrical Contractor License is not submitted along with tender documents then offer will be summarily rejected.
"(a)The tenderer must have successfully completed/substentially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work each costing not less than the amount equal to 60% of advertised value of the tender. (b) (i) In case of composite works (e.g. works involving more than one distinct component, such as Civil Engineering works, S&T works, Electrical works, OHE works etc. and in the case of major bridges - substructure, superstructure etc.), tenderer must have successfully completed/substantially completed any of the following during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of each component of tender, or Two similar works , each costing not less than the amount equal to 40% of advertised value of each component of tender, ora One similar work, each costing not less than the amount equal to 60% of advertised value of each component of tender. Note: Separate completed works of minimum required values for each component can also be considered for fulfillment of technical eligibility criteria. (b) (ii) In such cases, what constitutes a component in a composite work shall be clearly pre-defined with estimated tender cost of it, as part of the tender documents without any ambiguity. Any work or set of works shall be considered to be a separate component, only when cost of the component is more than Rs. 2 crore each. The tenderer shall submit the completion certificate as per proforma given in annexure-IV-A or IV-B or IV-C as applicable or in the format containing all information as required as per the Annex. IV-A or IV-B or IV-C. Note :- Criteria for the completed work/Substantially completed has been given in the General instructions in the tender document. "Following works will be treated as similar nature of work: "Any Electrical work related to HT/LT installations."
56 conditions · 7 needing a document upload
"Mandatory in case Bid security amount is prescribed in STD Para 5.1.2 - The Bid Security shall be deposited in cash through e-payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- XXXII and shall be valid for a period of 90days beyond the bid validity period. "
In case the tenderer is (i)Any firm recognized by Department of Industrial Policy and Promotion (DIPP) as 'Startups' - shall be exempted from payment of Bid security deposit and shall submit certified copy of the registration/ Valid document issued by DIPP (mandatory if applicable)
In case the tenderer is (iii) Labour Cooperative Societies - shall deposit only 50% of the Earnest Money Deposit and shall submit certified copy of the registration/ Valid document issued by the relevant Ministry/ Labour commission (mandatory if applicable).
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall submit the Firms's detail as per Annexure I. (Mandatory for all firms)
The tenderer shall submit the copy of certificate as per proforma given in Annexure II. & IIA(Mandatory for all firms)
The tenderer should submit the List of similar nature of works physically completed/substantially completed in all respects during last 7 years , ending last day of month previous to one in which tender is invited,(i) directly awarded by Govt./Semi Govt./Public sector undertaking / Autonomous bodies /Municipal bodies/ Railways Siding owners (ii) Public listed company having average annual turnover of Rs. 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of closing of tender/ as per proforma given in Annexure-III. In case of JV firm, these details are also required for all the members of the JV firm. In case, the Secondary Component(s) has/ have been defined, the details of successfully completed works of similar nature (that defined for the Secondary Component), executed by tenderer himself / the subcontractor (fully by any one or jointly i.e. partly by tenderer and remaining through subcontractor) during last five years, shall also be submitted (for five years )
In case of composite work, having distinct components and having separate schedule for each component having value more than 2 crores, tenderer should submit a details of work of similar nature successfully completed/substantially completed during last 7 years , ending last day of month previous to the one in which tender invited and detailed in Annexure-III (Bifurcated as per components of tender schedule), as per proforma given in Annexure-III-A. (Mandatory in case of tender for composite nature of work). In case of JV firm, these details are also required for all the members of the JV firm. In case, the Secondary Component(s) has/ have been defined, the details of successfully completed works of similar nature (that defined for the Secondary Component), executed by tenderer himself / the subcontractor (fully by any one or jointly i.e. partly by tenderer and remaining through subcontractor) during last five years, shall also be submitted (for five years ).
The tenderer shall submit the Attested copy of Completion Certificate/ substentially completed of works mentioned in Standard Technical Criteria under eligibility criteria above from the Organizations with whom they worked as per proforma given in Annexure-IV-A or IV-B (If the work is substantially completed) or IV- C (if the work is awarded by Public listed Company) as applicable. (Mandatory for all firms). In case of JV firm, these details are also required for all the members of the JV firm. In case, the Secondary Component(s) has/ have been defined, the Attested copy of Completion Certificate of works executed by tenderer himself / the subcontractor (fully by any one or jointly i.e. partly by tenderer and remaining through subcontractor) during last five years, shall also be submitted.
Details of Average Annual turnover of the public listed company (company should be 500 Cr and above) issued by Chartered Accountant. These details need to be submitted as per the proforma of Annexure VIII ( Mandatory in case of completion certificate issued by public listed company as per annexure IV- C)
The copy of the documents regarding listing in the National stock exchange or Bombay stock exchange with details of status of listing as on date of opening of tender, duly self-attested. (Mandatory in case of completion certificate issued by public listed company as per annexure IV-C)
The copy of the document of incorporation/ registration of the Public listed company (should be at least 5 years prior to date of closing of tender), duly self-attested. ( Mandatory in case of completion certificate issued by public listed company as per annexure IV- C)
The copy of document regarding Person Authorized by the Public listed Company to issue such certificate, duly self-attested. ( Mandatory in case of completion certificate issued by public listed company as per annexure IV- C)
Tenderer shall also submit the relevant copy of work order, bill of quantities bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received a copy of final/last bill paid by the public listed company in support of above work experience certificate duly self-attested.(Mandatory in case of completion certificate issued by public listed company as per annexure IV- C)
The tenderer shall submit the self attested copy of the PERMANENT ACCOUNT NO. issued by the Income Tax Department.
The tenderer shall submit the test report of the stone ballast conforming to railways specifications as mentioned in the general instructions of tender document. (This condition is mandatory and will be applicable only for the tenders of supply of ballast as specified "as required" in tender document.In case of non-compliance of this condition by the tenderer in ballast tenders only, the offer of the same will be summarily rejected.)
"The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIII, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet. "
"A statement showing construction works executed and payment received in any one of the previous three financial years or the current financial year (up to date of inviting tender) taking into account the completed as well as work in progress as per Annexure-XIX on the letter head of Chartered Accountant, to evaluate bid capacity of the tenderer (Mandatory for tender value more than Rs. 20 Crores). In case of JV firm details of construction works executed by each member of JV is required to be submitted"
The tenderer should submit the List of works on hand, existing commitments and balance amount of ongoing works as per proforma given in 'Annexure-V to evaluate bid capacity of the tenderer, duly verified by the Chartered accountant (Mandatory for tender value more than Rs. 20 crores)
The tenderer should submit the List of plants & Machinery available on hand (own) and proposed to be inducted/ Hired (own and hired to be given separately) for the subject work in Annexure-VI.
The tenderer should submit the List of Personnel, Organization available on hand and proposed to be engaged for the subject work in Annexure -VII.
The tenderer in the capacity of Sole Proprieter tenderer shall submit the affidavit duly executed on stamp paper and notarized as per Annexure IX. (Mandatory for Sole Proprietership Firm/ forJV firm having Sole Proprieter firm as a member)
The tenderer shall submit the Power of Attorney duly registered with registrar or notarized as per proforma given in Annexure XIV to be submitted by sole proprietor firm duly registrar with the registrar or notarized. (Mandatory for Sole Proprietership Firm , if tender documents are uploaded by any individual ,authorized by him) (Not required if tender documents are uploaded by proprietor himself).
The tenderer in the capacity of HUF shall submit the affidavit duly executed on stamp paper and notarized as per Annexure XXVI. (Mandatory for HUF firm/ for JV having HUF as a member) )
The tenderer in the capacity of HUF shall submit the Power of Attorney, duly executed on stamp paper and duly registered with registrar/ notarized as per Annexure XXVII. (Mandatory for HUF firm)( Required , if tender documents are uploaded by any individual ,authorized by him) (Not required if tender documents are uploaded by Karta himself).
The tenderer in the capacity of company shall submit the Copy of Certificate of Incorporation of the Company. (Mandatory for Company Firm/JV Firm having having Limited Company as a member)
The tenderer in the capacity of company shall submit the Power of Attorney/ Authorization (duly registered with registrar or notarized) including ratification clause duly signed by person authorized by the company as per proforma given in Annexure- XV. (Mandatory for Company Firm)( Required even if tender documents are submitted by the authorized/ power of attorney holder himself as per resolution passed by Board of Directors)
The tenderer in the capacity of Limited liabilities Partnership firm (LLP firm) shall submit the copy of LLP Agreement (Mandatory for LLP firm /JV Firm having LLP Firm as a member)
The tenderer in the capacity of Limited liabilities Partnership firm (LLP firm) shall submit the copy of Certificate of Incorporation (Mandatory for LLP firm /JV Firm having LLP Firm as a member)
The tenderer in the capacity of Limited liabilities Partnership firm (LLP firm) shall submit the copy of Resolution of Partners of LLP firm (executed on the Letter Head of LLP firm) in favour of the individual to sign he tender on behalf of the LLP firm and deal with tender on dehalf of the firm as per proforma given in Annexure-XX.(Mandatory for LLP firm).
The tenderer in the capacity of Registered Society/ Registered Trust shall submit the copy of the certificate of registration (Mandatory for Registered Society/ Registered Trust and JV firm having Registered Society/ Registered Trust as a member)
The tenderer in the capacity of Registered Society/ Registered Trust shall submit the copy of the Deed of Formation (Mandatory f o r Registered Society/ Registered Trust and JV firm having Registered Society/ Registered Trust as a member)
A copy of power of attorney in favour of the individual to sign the tender document and create liabilities against society/trust (Annexxure XXI)
The tenderer in the capacity of JV firm shall submit the Memorandum of Understanding of JV duly notarized as per proforma given in Annexure-X.(Mandatory for Joint Venture Firm)
The private/ limited company, sole propriter firm or HUF/Society/Trust partcipating as a member of JV shall submit the Power of Attorney duly registered with registrar or notarized as per proforma given in Annexure-XII (Mandatory), (For private/ limited company as member of JV- the annexure XII is required evenif MOU/JV agreement is signed by the authorized/ Power of attorny holder himself as per the Copy of Resolution) (For sole propriter firm/HUF as member of JV- Not required if MOU/JV agreement is signed by the proprieter of the sole propriter firm/ karta of HUF himself)
The tenderer in the capacity of JV firm shall submit the Letter of consent duly executed on stamp paper as per proforma given in Annexure-XI to be submitted by a partnership firm participating as a Member of JV firm. (Mandatory for Joint Venture Firm if one of the member is Partnership firm)
The tenderer inthe capacity of JV firm shall submit the Power of Attorney duly registered with registrar or notarized in favour of the individual to sign the MOU/JV agreement on behalf of the partnership firm and create libility against the firm as per proforma given in Annexure-XVIII.(Mandatory for Joint Venture Firm if one of the member is Partnership firm) (Required evenif MOU/JV agreement is signed by one or more partners authorised in the partnership deed, letter of consent )
The tenderer in the capacity of Limited liabilities Partnership firm (LLP firm) shall submit submit the Power of Attorney duly registered with registrar or notarized, issued by LLP firm as per proforma given in Annexure-XX. (Mandatory for LLP firm/ for JV having LLP as member) ( Required even if tender documents are submitted by the authorized/ power of attorney holder himself as per resolution passed by Parters of the LLP)
The tenderer in the capacity of JV firm shall submit the Copy of Resolution of the Partners of LLP firm, permitting the LLP firm to enter into a JV agreement, authorizing one of the partner of LLP firm to sign MOU/JV Agreement and such other documents required to be signed on behalf of the LLP firm and to create libilities against the LLP firm and / or to do any other act on behalf of the LLP firm as per proforma given in Annexure-XXIII (Mandatory for JV firm if one of the member is LLP firm).
The tenderer inthe capacity of JV firm shall submit the Power of Attorney duly registered with registrar or notarized (Backed by Resolution of the Partners of LLP firm) in favour of individual to sign the tender, to sign MOU/JV Agreement on behalf of the LLP firm and create liability against the LLP firm as per proforma given in Annexure-XXIV. (Mandatory for JV firm if one of the member is LLP firm).
The tendere in the capacity of JV firm shall submit the copy of resolution passed by Board of Directors of the Company, permitting the company to enter into a JV agreement, authorizing MD or one of the Directors of Mangers of the Company to sign JV Agreement, such other documents required to be signed on behalf of the Company and enter into liability against the company and/or do any other act on behalf of the company to be submitted as per Annexure-XVII. ( Mandatory for JV firm if one of the member is Limited Company)
The tenderers shall submit the information and particulars regarding retired Railway Engineer(s)/Officer(s) of the Gazetted rank and regarding Relative(s) employed in Gazetted capacity on North Western Railway as per proforma given in Annexure XXII (Mandatory)
"The tenderer in the capacity of newly formed Partnership Firm/ LLP Firm, shall submit Declaration as per ANNEXURE XXVIII (Mandatory if tenderer is Newly Formed Partnership Firm/ LLP Firm. The following relevant documents are Annexed with bid - (mandatory as applicable) (1) Details of previous Propriety firm / Partnership Firm/ LLP firm as per annexure I (2) A copy of previous partnership Firm (Notarized or duly registered with the Registrar) (3) Affidavit as per proforma given of Annexure -IX for previous Propriety firm (duly executed on stamp paper and notarized). (4) Copy of previous LLP agreement and certificate of incorporation. (5) Dissolution deed/ splitting deed of the previous partnership deed or LLP agreement (in case of dissolution of previous partnership firm/ LLP firm) (6) Proof of surrender of previous PAN no (in case of dissolution of previous partnership firm, LLP firm or propriety firm) (7) Documents for the technical, financial criteria, bid capacity as claimed w.r.t. such partner(s) joining the new/ existing partnership firm, as per para 16.1 (c ), (d), (f),(g ), (k) of Bid document. "
"The tenderer in the capacity of existing Partnership Firm/ LLP Firm, shall submit Declaration as per Annexure XXXIX (Mandatory if tenderer is existing Partnership Firm/ LLP Firm. The following relevant documents are Annexed with bid - (mandatory as applicable) (1) Details of previous Propriety firm / Partnership Firm/ LLP firm as per annexure I. (2) A copy of previous partnership Firm (Notarized or duly registered with the Registrar) (3) Affidavit as per proforma given of Annexure -IX for previous Propriety firm (duly executed on stamp paper and notarized). (4) Copy of previous LLP agreement and certificate of incorporation. (5) Dissolution deed/ splitting deed of the previous partnership deed or LLP agreement (in case of dissolution of previous partnership firm/ LLP firm) (6) Proof of surrender of previous PAN no (in case of dissolution of previous partnership firm, LLP firm or propriety firm) (7) Documents for the technical, financial criteria, bid capacity as claimed w.r.t. such partner(s) joining the new/ existing partnership firm, as per para16.1 (c ), (d), (f),(g ), (k) of Bid document "
"The tenderer in the capacity of existing/ New Company, shall submit Declaration regarding constitution of the existing/ New Company as per Annexyre XXX (Mandatory if tenderer is merged Company). The following relevant documents are Annexed with bid - (mandatory as applicable) (1) Details of company getting merged as per annexure I (2) Copy of Memorandum of Association/ Articles of Association of the Company getting merged (3) Copy of certificate of incorporation of previous company getting Merged. (4) Resolution by the Board of Directors for the Merger of the company(s) with the tenderer (5) Proof of surrender of previous PAN no (6) Documents for the technical, financial criteria, bid capacity as claimed w.r.t. such Company(s) joining the new/ existing Company, as per para 16.1 (c ), (d), (f), (g ), (k) of Bid document "
"Tenderer shall submit a formal agreement duly notarized, legally enforceable in the court of law, executed by tenderer with the subcontractor for the component(s) of work proposed to be executed by the subcontractor(s), and shall be submitted along with the offer as per performa given in Annexure XXXI. (Mandatory in case of secondary components are defined in the tender with special condition 'for submission along with the Offer) "
Modification of LT/HT (0.22/0.44/11/33 Kv) power line crossings in connection with Ringas-Khatushyam ji new Railway line project.
EL-C-JP-T06-25-26
EL-C-JP-T06-25-26
Open
Works - General
12 Months
Jaipur, Rajasthan
₹0
₹2.5 L
25 Feb 2026
31 Jan 2026
11 Feb 2026
79 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,90,54,482 | ||
| — | 61.00 | — | — | ||
| To drawn the site plan of HT/LT track crossing on tracing paper of 85/90 GSM showing details of crossings, DP., RCC pipe, cable with depth and bank height and other details & Certificates etc. as per railway requirement and same is to be got signed by Railway & JVVNL authorities before execution of work, each tracing is to be supplied with 12 copies of ammonia prin | — | — | — | 1,52,012 | |
| — | 61.00 | — | — | ||
| To get printed the agreement on 500 Rs. Stamp paper as per standardized proforma of railway track crossing regulation 1987 in Hindi & English separately, Preparation of paper for getting EIG sanction for each crossing before execution of work. (1 original copy and 6 Xerox copies of each) with proper drawing etc. | — | — | — | 1,23,342 | |
| — | 61.00 | — | — | ||
| Preparation of paper for way leave agreement on Rs. 500/- Stamp paper for getting EIG sanction for each crossing before execution of work. As per specification. | — | — | — | 36,722 | |
| — | 66.00 | — | — | ||
| Inspection, testing and examination fees of up to 11 KV line, busbar and cables per circuit for energisation permission. | — | — | — | 13,860 | |
| — | 56.00 | — | — | ||
| Inspection, testing and examination fees of 11KV up to 33 KV line, bus bar and cables per circuit for energisation permission. | — | — | — | 74,032 | |
| — | 150.00 | — | — | ||
| Supply, fixing & commissioning of 9 mtrs. long PCC single pole for 11 KV / 400 V for making cut point at 90 degree or realigning existing line and as per specification enclosed. | — | — | — | 4,97,100 | |
| — | 500.00 | — | — | ||
| Supply of material and stringing of ACSR DOG conductor size 06/1/4.72 Note:- Cost shall be quoted for per meter of conductor and as per specification enclosed. | — | — | — | 32,000 | |
| — | 1500.00 | — | — | ||
| Supply of material and stringing of ACSR conductor size 06/1/3.35 Note: - Cost shall be quoted for per meter of conductor and as per specification enclosed. | — | — | — | 39,000 | |
| — | 60.00 | — | — | ||
| Dismentalling of existing HT /LT overhead crossing complete in all respect & connecting XLPE cable 11 KV grade / LT cables to the system . | — | — | — | 32,700 | |
| — | 210.00 | — | — | ||
| Supply and fixing of stay complete with stay wire, stay insulator, stay rod, anchor plate, straining screw including clamps nut bolts washers pipe piece 50 mm dia, 1.5 m long foundation and painting. | — | — | — | 1,28,520 | |
| — | 100.00 | — | — | ||
| Manufacture, supply and fixing 4 wire cross arm of M.S. angle 50 x 50 x 6 mm suitable to accommodate 2/4 nos. conductors / guard wires with clamps, nut bolts and washers including primer coated of red oxide and two coats of aluminium paint as per latest ISS and as per specification enclosed. | — | — | — | 33,400 | |
| — | 264.00 | — | — | ||
| Supply, erection and commissioning of LT shackle insulator with all accessories on pole. And as per specification enclosed. | — | — | — | 9,240 | |
| — | 122.00 | — | — | ||
| To make termination point on existing pole. | — | — | — | 80,032 | |
| — | 122.00 | — | — | ||
| Supply, fabrication and Fixing of cable marker for HT / LT power line track crossing (PLTC) as per drawing provided by HQ and making of the details of cable laying as per drawing. 02 nos. per crossing. | — | — | — | 2,27,286 | |
| — | 600.00 | — | — | ||
| Supply & fixing of GI pipe having internal dia 100mm medium duty. | — | — | — | 3,05,400 | |
| — | 72.00 | — | — | ||
| Supply & fixing of GI pipe having internal dia 150mm medium duty. | — | — | — | 45,576 | |
| — | 100.00 | — | — | ||
| Dismantling of existing LT Poles with fittings by digging the foundation and transportation up to the required site as per specification. | — | — | — | 50,800 | |
| — | 56.00 | — | — | ||
| Supply of material, fabrication & erection of 12.8 Mtrs. long Lattice tower made of 65x65x5 mm MS angle with 50x6 mm MS flat for bracing including excavation of pit 1.50x1.50x2.10 m in ground. The tower should be erected by CC grouting & muffed in cement concrere of mix. ratio 1:3:6 having size of 1.20x1.20x2.10 m over base concrete of 100 mm thick in mix. 1:5:10 as per IS Spec. The remaing position of hte pit be back filled with watering & ramming and surplus material shall be dispose-off within lead of 50m. In all type of soil & tower weight 508 Kg. As per specification. | — | — | — | 24,81,472 | |
| — | 100.00 | — | — | ||
| Supply, erection, testing & commissioning of outdoor type cable end boxes suitable for 11 KV 'E' 3 core 185 Sq.mm XLPE | — | — | — | 9,17,800 | |
| — | 12.00 | — | — | ||
| Supply, erection, testing & commissioning of outdoor type cable end boxes suitable for 33 KV 'E' 3 core 300Sq.mm XLPE | — | — | — | 1,68,444 | |
| — | 336.00 | — | — | ||
| Supply, erection, testing and commissioning Disc/pin insulator for 11/33 KV on SP /DP. | — | — | — | 1,22,976 | |
| — | 4.00 | — | — | ||
| SITC of straight through joint 11 KV three core HT XLPE 185 SQMM | — | — | — | 45,128 | |
| — | 2.00 | — | — | ||
| SITC of straight through joint 33 KV three core HT XLPE 300 SQMM | — | — | — | 45,754 | |
| — | 924.00 | — | — | ||
| Supply and fixing of MS Channel 100x50x6 mm for termination with clamps, nuts, bolts and washers etc. including primer coat of red oxide and two coats of aluminium paints. As per specification. | — | — | — | 60,060 | |
| — | 50.00 | — | — | ||
| Supply, fixing & commissioning of 'V' type cross arm suitable for making 11/33 KV cut point | — | — | — | 24,250 | |
| — | 50.00 | — | — | ||
| Supply, fixing & commissioning of 11/33 KV top hamper and as per specification enclosed. | — | — | — | 5,200 | |
| — | 6.00 | — | — | ||
| Measurement of EHT lines as per specification. | — | — | — | 11,946 | |
| — | 396.00 | — | — | ||
| Supply and fixing of G.I. pipe 50mm for cable laying with pole/wall/under road/floor etc. | — | — | — | 99,792 | |
| — | 12000.00 | — | — | ||
| Supply and laying of HDPE pipe, dia 160mm under road/ground/ floor/railway track or as per site requirement already excavated trench. As per specification. | — | — | — | 55,44,000 | |
| — | 1500.00 | — | — | ||
| Supply and laying of HDPE pipe conforming to IS 4984:1995, 75/80mm dia wall thickness 3 mm PN-4 under the road/air. The work invloves laying of HDPE pipe. As per specification. | — | — | — | 1,78,500 | |
| — | 6000.00 | — | — | ||
| Digging and filling of trench size 0.4 x 0.8 mtr as per spec. ( trench work may be on kuchha/pucca land and all type of soil as per site requirement and without protective layer of brick ) | — | — | — | 2,88,000 | |
| — | 4000.00 | — | — | ||
| Excavation & refilling of 0.5 m width, 1.2 m Deep trench in all kind of soil for laying of HDPE/ SPUN Pipe for underground cable crossing. As per specification | — | — | — | 5,08,000 | |
| — | 8200.00 | — | — | ||
| Laying, testing & commissioning of LT cable in Air / laid concrete pipe /in ground in trench across crossing pole with transportation from main depot to required site. Note: - Cable will be supplied by Railways. | — | — | — | 1,72,200 | |
| — | 7000.00 | — | — | ||
| Laying, testing & commissioning of 11 KV /33 KV XLPE cable in air/ ground/ in trench/spun pipe, with transportation from main depot to required site. Note: - Cable will be supplied by Railways. | — | — | — | 5,67,000 | |
| — | 2000.00 | — | — | ||
| Drilling of horizontal bore below Rly track by pushing method for laying of HDPE/SPUN/DWC pipe of various sizes up to 450 mm dia. As per specification. | — | — | — | 56,12,000 | |
| — | 112.00 | — | — | ||
| Supply of material and providing of earth electrode for earthing byusing medium grade, 50mm GI pipe electrode3mtr. long, 7/4mm dia galvanized steel stranded wire including connections from earth pipe to pole. As per specification. | — | — | — | 1,37,312 | |
| — | 10.00 | — | — | ||
| SITC of LT heat shrinkable straight through joint (25-185sqmm cable) | — | — | — | 22,950 | |
| — | 8.00 | — | — | ||
| Dismantling of existing 11/33 KV transformer from DP/FP/ other location and Transportation to new site, installation, testing and commissioning with all required accessories at new DP. | — | — | — | 1,16,880 | |
| — | 4.00 | — | — | ||
| Dismantling of 0.44/11/33KV Iron pole/H-Pole and deposit the released material to JVVNL/AVVNL/JDVVNL/Railway store as directed by the site Engineer. As per specification. | — | — | — | 43,796 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TenderDOC-T06-25-26.pdf
ATTACHMENT
GCCApril-2022.pdf
ATTACHMENT
JPO_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .