PROVIDING DG SET FOR OPERATION CELL IN POLICE STATION, SECTO-26, CHANDIGARH.

DSR Item No.29.1.1 Supply, installation, Testing & Commissioning of ‘Silent Type Diesel Generating set as per CPCBIV + or better norms along with having Prime Power Rating of KVA as below, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz 3 phase system & for 0.85 Load Factor, (As per Complete Item No. 1 of the DNIT).

DSR Item No.1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

DSR Item No.2.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/ Isolator)

8 way, Double door

DSR Item No. 2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

DSR item No.5.2 Earthing with G.I. earth pipe 4.5 Mtr. long, 40 mm dia. including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

DSR item No.5.4 Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

DSR item No.5.12 Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

DSR item No.5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

DSR item No.15.16 Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

63 mm dia (OD-63 mm & ID-51 mm nominal)

Foundation for DG Set DSR Item No. 2.6.1 (Civil) Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30cm in depth 1.5m in width as well as 10sqmm (on plan) including disposal of excavated earth, lead up to 50m and lift upto 1.5m disposal earth to be leveled and neatly dressed.

All kind of soil.

DSR Item No. 4.1.11 (Civil) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level:

1:5:10 (1 cement: 5 fine sandderived from nature sources :10 grade stone aggregate 40 mm nominal size derived from nature sources).

DSR Item No. 5.22.6 (Civil) Steel Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.

Thermo-mechanically treated bars of grade Fe-500D or more.

DSR Item No. 13.1.1 (Civil) Providing 12 mm thick cement plaster of mix :

1:4 (1 cement : 4 coarse sand)

DSR Item No. 4.1.3 (Civil) Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering- All work up to plinth level:

1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

DSR Item No. 5.9.2 (Civil) Centering and shuttering including strutting propping etc. and removal of from for all heights :

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

DSR item No.2.2 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, Ics=100% Icu and Operational Voltage 690V etc. as required

100 A,30KA,FPMCCB

S/E of enclosure for MCCB 63/100/125 Amp 3 Pole / 4 pole made out of 16 Gauge M.S. sheet. The enclosure is to be painted after one coat of primer including its erection in existing angle iron board with nut bolts/ screws etc. to complete the job to the entire satisfaction of Engineer In Charge.

Supply and laying of XLPE insulated PVC sheathed Aluminum conductor cable of 1.1 KV grade as per IS 7098 (Part-I) 1988 (amended up to date) of the following sizes to be laid in existing RCC/Hume/DWC/ Metal pipe. (As per Complete Item No. 18 of the DNIT).

50 Sq.mm. 3.5 Core XLPE ArmouredAluminium conductor cable

Please Enable Macros to View BoQ information