Smart periodical services and repair works of Md Accn under AGE B/R-II at Tibri Mil Stn Gurdaspur.

M&L for 15 mm thick rendering with ready mix mortar of approved make on brick work/stone/concrete wall, facia, projection, chajja etc. external surfaces finished even and smooth without using extra cement of any shape, any size incl taking down existing plaster incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 12 mm thick rendering with ready mix mortar of approved make on brick work/stone/concrete wall, facia, projection etc. internal surfaces finished even and smooth without using extra cement of any shape, any size incl taking down existing plaster of any size incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for 5 mm thick rendering with ready mix mortar of approved make on brick work/stone/concrete wall etc. internal surfaces finished even and smooth without using extra cement of any shape, any size incl taking down existing plaster of any size incl raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L for preparation of newly plastered surfaces on wall/ roof projections including facia, cornices, chajja etc and applying one coat of primer and applyint two or more coats of 100% premium acrylic smooth exterior emulsion paint having VOC less than 50gm/ ltrs and UV resistance as per IS 15489 : 2004, alkali and fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives & Color stay technology, Excellent dirt pickup resistance @ 1.79 litre/ 10 sqm diluted with water as per manufacturers instructions over and including priming coat of exterior waterproof primer applied @ 0.9 litre (Undiluted) / 10 sqm over old/new putty surfaces of wall/ ceiling complete all as specified and directed. (Note:-Paint to be applying with using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed make / company).

M&L for newly plastered surfaces on internal wall surface and applying water proof wall care putty @ 1 kg (undiluted) per sqm of average thickness 1mm to 2mm over the prepared plastered wall surfaces, one or more coats and grinding the puttied surfaces with mechanical grinder for make the surface even and smooth for receiving primer and applying two coats of smooth oil bound distemper with rich matt finish having VOC less than 50 grms per ltr complying lead criteria @ 1 ltrs ( undiluted) / 10 sqm diluted with water as per manufacturers instructins applied over of required shade ( Company Depot Tinted) with silicon additives and color stay technology over and including priming coat of interior water proof primer with roller finish and allow 6-8 hrs to dry the surface for second coats of paint complete all as specified and directed. (Note:-Paint to be applying with using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed make / company).

M&L for preparation of new plastered surface and applying three coats of white wash on ceiling complete all as specified and directed by Engineer-in-Charge.

M&L for chipping off existing loose, damaged concrete from RCC members i.e RCC columns, beams, slabs, chajjas etc on external and internal faces , etc for providing PMM (Polymer modified cementitious mortar). The following steps are to be followed :- (i) Dry sub strate surface and free of debris & dust. (ii) Applying epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible. (In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) pre packed ready to use of n exc 50 mm thickness. (iv) PMM surface to be moist cured for three days followed by air curing in temperature as rcommended by manufacturer complete all as specified and directed.

Complete removal of existing treatment of wall/ roof projections including facia, cornices, chajja etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour with mechanical sander having RPM of 1500 - 2700 rpm, with internal dust extraction system for clean environment, and preparation of old plastered/scrapped surfaces of wall/ceiling by filling cracks by external wall putty/crack fill paste and applying exterior water proof wall care putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1mm to 2mm over the prepared plastered wall/ceiling surfaces, one or more coats and grinding the puttied surfaces with mechanical grinder for making the surface even and smooth for receiving primer and applying Two or more coats of 100% Premium acrylic smooth weather proof exterior emulsion paint having volatile organic compound less than 50 gm/litre and ultra violet resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives & color stay technology, excellent dirt pickup resistance @ 1.79 litre/ 10 sqm diluted with water as per manufacturers instructions over and including priming coat of exterior waterproof primer applied @ 0.9 litre (Undiluted) / 10 sqm over old/new putty surfaces of wall/ceiling complete all as specified and directed. (Note:-Paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed make/ company).

M&L for preparation of old plastered surface of walls by rubbing down, making good holes, cracks and stopping etc on existing distempered surfaces and applying one coat of cement base paint on wall height upto 12m incl cleaning the floor/ joinery, surfaces, glass panes complete all as specified and directed by Engineer-in-Charge. (Note :- Paint using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed make).

Complete removal of existing treatment on internal ceiling by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean,free from dust, loose paint etc by skilled labour with mechanical sander having RPM of 1500 - 2700 rpm, with internal dust extraction system for clean environment, and preparation of old plastered/scrapped surfaces of wall by filling cracks by internal wall putty/crack fill paste and applying interior water proof wall care putty @ 1 Kg(undiluted) per sqm of average thickness 1mm to 2mm over the prepared plastered ceiling surfaces, one or more coats and grinding the puttied surfaces with mechanical grinder for make the surface even and smooth for receiving two coats of white wash on ceiling with roller finish and allow 6- 8 hrs to dry the surface for second coats of white wash complete all as specified and directed. Note:-whitewash using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed.