CERTAIN BR MISC REPAIRS TO DRAIN PATH CULVERTS COMPOUND WALL SECURITY FENCING AND HARD STANDING ETC IN RESIDENTIAL AREA AT RCI HYDERABAD

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion of concrete, brick masonary and making good disturbed ground all as specified and directed.

Excavating in post holes (or similar holes)in hard/dense soil, each n exc 0.5 cu.m, getting out, complete all as specified and directed.

M/L cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in foundation for posts etc, incl formwork if required complete all as specified

Dismantling of fencing wire mesh of any type complete all as specified and as directed.

Supply only PVC coated tuflon chain link fencing (2.5mm wire+1.5mm PVC coating) of approved mesh of size 75mm size and nominal dia GI wire with tolerance as per IS to any type of standards , rails straining bolts etc., including provision of line wires , binding wire etc.,complete all as directed.

Supply only Chain link MS galvanised fencing, any size or type complete all as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire all as specified and directed

S&F mild steel work as in posts and struts in fencing including cutting top to shape as direct, drilling holes, notching for wire etc,. flat iron fillets (for securing wire mesh etc.) incl all necessary drilling, bolting or reveting,etc and similar work conforming to Fe-290 (Gde E165) all as specified and directed.

S&F for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe-290 (Gde E165) all as specified and directed.

Mild steel screw bolts (Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5 Cm long but not exceeding 10 cm long , 5 to 10mm dia of neck as specified and directed.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specifed and directed. (each line wire to be measured)

S & F mild steel TMT bars 10 mm dia over, cut to length, bent to shape required including crancking bending spirally for hooping for col hooking ends and binding with and including mile steel wire non less than 0.9 mm dia securing with clips in quality complete all as specifed and directed.

M & L welding in repairs not exceeding 2.5 cm in length with thickness of metal not exceeding 6mm complete all as specified and as directed.

M & L welding in repairs exceeding 2.5 cm but not exceeding 5 cm in length with thickness of metal not exceeding 6mm complete all as specified and as directed. Note: (1) Works shall be carried out in multi storey Building upto 2nd floor.

M&L for preparing new or previously untreated surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Demolition of brick works/stone masonry work built in cement mortar including all quions, arches, pillars etc.

Dismnantling of wrought iron or mild steel works of any description not otherwise provided for complete all as directed.

Taking down cement plaster of any description on brick or stone walls from any height including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified

M&L walling of square rubble regular coursed well bonded bedded and solidly hearted stone masonry built in cement mortar 1:4 complete all as specified and directed.

All as per item No 20 above but except stones.

M&L Flush pointing to squared rubble Secunderabad type masonary coursed or uncoursed in cement mortar 1:4 complete all as specified and directed.

M&L for boulder pitching laid dry handpacked tightly and grouted with cement and sand mortar 1:6 including demolition of unserviceable boulder pitching complete all as specified and directed.

Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 complete all as specified and as directed

M&L 15mm thick plaster on fair faces of brick surface with CM 1:4 finished fair and even without using extra cement all as specified and directed.

M&L cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in coping etc, incl formwork if required complete all as specified

Dismantling of Stone slabs laid, bedded and pointing in any mortar and tiles of any description or thickness in floors, aprons etc.

M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 40 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .

M&L for Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in near cement slurry in floors With grey cement and pigments and including 15mm screed bed in CM 1:4 all as specified and directed.

Demolition of cement concrete in ground floors and paving n.exc 15 cm thickness (below or above ground level).

M&L for PCC 1:4:8, Type D2, using 40mm graded stone aggregate, concrete surface furnished fair and rough as in subbase complete all as specified.

M&L for cement concrete 1:2:4 type B2 (using 20 mm graded stone aggregate) as in drains, incl necessary formwork complete all as specified

M&L for Preparation of new concrete surfaces and applying two coats of synthetic enamel paint over 10cm girth or width in two colours as per approved pattern over a coat of primer complete all as specified and directed.

M&L for Preparation of new plastered Concrete surfaces and applying two coats oMaterial & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfacesr complete all as specified and directed.

M & L for Cement concrete 50 mm thickType B1 1:2:4 (20 mm graded aggregate) in floor finished even and smooth without using extra cement in floor/ . Complete all as specified and directed.

M&L for preparation and applying two coat of floor paint of new/old path tiles (Make-Indigo Floor paint). All as specified and directed.

Material and labour for preparation of any description over 10 centimetre width or girth and applying one coats of synthetic enamel paint of curbs stone. Complete all as specified and as directed.

M&L for 20mm thick Granite (of any type) work(table rubbed and polished) for wall lining / cladding over cement mortar in (1:4) (veneering to wall) 12mm thick in cement mortar(1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.all as specified and directed.

M&L for 20mm thick granite (of any type) work (table rubbed and polished) in cooking platforms and like beded in cement mortar (1:4), 15mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

Demolition and breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) 150mm internal dia of pipe jointed in cement mortar including PCC bed and disposal of concrete debris in low lying areas complete all as directed.

Demolition and breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) 200mm internal dia of pipe jointed in cement mortar including PCC bed and disposal of concrete debris in low lying areas complete all as directed.

Demolition and breaking up drain pipes (salt glazed stone ware, AC or reinforced concrete) 300mm internal dia of pipe jointed in cement mortar including PCC bed and disposal of concrete debris in low lying areas complete all as directed. Note for item No 1 to 3: Excavation and earth work will be measured and paid separately.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.5m in depth for foundation, for cesspits, manholes, sewage line etc., and not exceeding 10sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches not exceeding 1.50m wide, depth exceeding 1.50m and not exceeding 3.00m for foundation, for cesspits, manholes, sewage line etc., and not exceeding 10sqm on plan and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each layer as in soil complete all as specified and as directed.

Removing excavated material/soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed.

M&L, 150mm bore reinforced concrete pipes, class NP2 with collars laid to falls in trenches or concrete bed, jointed with cement mortar 1:1 and testing complete all as specified and as directed

M&L, 200mm bore reinforced concrete pipes, class NP2 with collars laid to falls in trenches or concrete bed, jointed with cement mortar 1:1 and testing complete all as specified and as directed

M&L, 300mm bore reinforced concrete pipes, class NP2 with collars laid to falls in trenches or concrete bed, jointed with cement mortar 1:1 and testing complete all as specified and as directed

M&L, PCC 1:3:6 type C2 using 40mm graded stone aggregate as in concrete bed to drain pipes 150mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L, PCC 1:3:6 type C2 using 20mm graded stone aggregate as in concrete bed to drain pipes 200mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L, PCC 1:3:6 type C2 using 20mm graded stone aggregate as in concrete bed to drain pipes 300mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L, PCC 1:3:6, type C-2 using 20mm graded stone aggregate as in drain, surface channels and benching including necessary formwork complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth (inner girth shall only be measured and paid) in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc., complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm carried out vide item No. 20 here in before, complete all as specified and directed.

M&L, pre cast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs including necessary form work, placed in position, set in cement mortar (1:4) including dismantling of damaged RCC cover slabs complete all as specified and directed. Note: Reinforcement shall be measured and paid separately.

M&L, TMT bars 10mm dia, as in reinforcement cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed.

Cleaning of blocked WC's and soil pipe lines of any dia upto first manhole by roding or by any other means and flushing well with water after cleaning complete all as directed.

Cleaning of nahani trap of any depth by opening cover and taking out accumulated sludge, garbage, silt or any other foreign material, flushing with clean water, re-fixing the cover after cleaning of nahani trap and removing the sludge and other foreign material to a distance exceeding 50m but not exceeding 100 M and buried under ground (minimum 300mm below ground level) including excavation of pits and returning, filling in and dressing ground to slope if required, complete all as specified and as directed.

Mechanically pumping out sewage water from Septic Tanks / Soak Wells / Sumps etc., of any size / dia by means of mechanical operated equipment / trolley mounted Browsers with taking all precautionary measures and removing water to outside MD land (working on foul condition) complete all as directed.

Cutting into existing manholes for connecting new drains, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), finished smooth and reforming benching for any bore pipe as required and as directed by the Engineer-in-Charge.

Taking up existing loose CI manhole covers and frames, medium duty, any type and size, prepararing top of brick work to receive covers and setting in cement mortar 1:3 and flaunching with cement concrete 1:2:4 type B1 complete all as specified and directed.

Cleaning of sewage line of any bore and storm water drains by rodding or using jetting machine or by any other means from one manhole to another manhole, septic tank to manhole, gully trap to manhole etc,. dewatering, desilting and flushing well with water after clearing the blockage and testing the flow complete all as directed.

Cleaning of roofs/ slabs/ chajjas, rain water pipe, Cutting/derooting of small plants/shrubs etc from the building and removing all dust/ dry leaves/ mud etc., and making good disturbed wall/flooring surface with PCC 1:2:4 type B1, using 20 mm graded stone aggregate or in cement mortar 1:3 as per site requirement including disposal of unserviceable material to a distance not exceeding 50m all as specified and directed by engr-in-charge. Note: Measurement shall be made as Plan area of the roof and portico shall be measured for payment, cleaning of chajja shall be included in the rate of roof area.

S & F white glazed earthen ware vitreous Vitreous China wash basin, white, flat back, size 630x450mm excluding ditto but including bracket and including CI brackets, with including 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete

S&Fin repair brass chromium plated centre hole without popup type including hose pipe complete all as specified and directed . Make : cat No 8250 of Prayag or equivalent

S&F in repairs ABS Health Faucet Set with SS Hose & ABS Wall Bracket in Chrome Finish incl chrome flexible pipe of 1.00m length and fixing brackets and fixed as per manufacturers instruction. Complete all as specified and directed.Cat No BEA-81 of Prayag or equvalent

S & F in repair two In one wall Mixer with L bend ( provision of over head shower ) including adjustable legs and wall flanges complete all as specified anddirected.- Model No 8270 of Prayag or equivalent

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories).

S&F, 110mm dia uPVC(SWR) pipes, ISI marked, single socketed in any length with rubber ring joints fixed to walls or laid in floor with PVC clamps as rain water pipe complete all as specified and as directed.

S&F, 110mm bore PVC(SWR) bends any radius with access door and jointing with solvent cement, complete all as specified and as directed.

S&F, 75mm dia uPVC(SWR) pipes, ISI marked, single socketed in any length with rubber ring joints fixed to walls or laid in floors with PVC clamps as rain water pipe complete all as specified and as directed.

S&F, 75mm bore PVC(SWR) bends any radius with access door and jointing with solvent cement, complete all as specified and as directed.

M&L for PVC (SWR) floor trap, 75 mm dia plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs, vitreous china squatting pan, ‘Orissa’ pattern of size 580 x 440mm, white, with integral foot rests, including connection to trap, and to flushing pipe, anti-syphonage pipe, etc., complete including provision of cement concrete bedding in 1:5:10 type E2 using 40mm graded stone aggregate and making good to floor complete all as specified and directed.

S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white including connecting to trap and to flushing pipe, anti syphonage pipe etc., complete including fixing to floor with bolts, including provision of plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs, vitreous china Urinal, half stall type, white, including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing grating and union for discharge pipe etc., chromium plated urinal spreader and waste coupling of PTMT (half or full threaded) with 32mm bore dia of discharge pipe (minimum weight shall be 45gms) complete all as specified and directed.

S&F in repairs, 10 litres, PVC valveless, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float, flush pipe and handle including brackets complete all as specified and as directed.

S&F in repairs, 32mm dia PVC flexible waste pipe with fittings of suitable length as per site requirement for WHB/Sink or Urinal complete all as specified and directed.

S&F in repairs, PVC connection 15mm dia and 60 cm long with 2 Nos PTMT nuts complete all as specified and directed.

S&F in repair fancy type CP bib taps cast copper alloy chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore, fixed in repairs complete.

S&F in repairs, 15mm bore Stop valve, cast copper alloy, chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron/GI pipe or for union complete all as specified and directed.

S&F in repairs, stainless steel grating round of size 125mm complete all as specified and directed.

S&F in repairs, Waste fittings 32mm dia , brass, chromium plated for sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed etc complete all as specified and directed.

Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing rubbish off the premises complete all as specified and directed.

M&L, 7 to 8mm thick 300 x 300mm coloured, joint free Non skid ceramic tiles, in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including screed bed or bedding layer 15mm thick in CM 1:6 laying in floors complete all as specified and as directed.

M&L, coloured glazed ceramic tiles of size 450/ 600x 300mm, 6 to 7mm thick in dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM 1:3 complete all as specified and as directed. Note: Design of tiles shall be as approved by GE

S&F in repairs GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls and ceilings or laid in floors (including short length) including taking down old GI pipe. Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls and ceilings or laid in floors (including short length) including taking down old GI pipe. complete all as specified and directed by Engineer-in-Charge.

S&F in repairs GI tubing medium grade with all fittings like Tee, bend, elbow etc, 25 mm bore fixed to walls and ceilings or laid in floors (including short length) including taking down old GI pipe.complete all as specified and directed by Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws all as specified and directed.

S&F in repair Fibre glass reinforced translucent sheeting plain 2 mm thick fixed with coach screw/bolt and washer in roof, wall and iron gate etc. complete all as specified and directed.

M&L Providing pre cast cement concrete factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete..

S&F mild steel work grade Fe-290 grade E-165 as in posts ,roof trusses (framed/ unframed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, hollow pipes or flat sections) including distance pieces, cleats etccomplete all as specified and directed.

Anjana corporation (BID ID -3476372)

VAISHNOVI CONSTRUCTIONS (BID ID -3476306)

sri vishnu enterprises (BID ID -3476280)

M/s ANUSHA ENTERPRISES (BID ID -3476406)

MM PROJECTS (BID ID -3475920)

WELDECOR (BID ID -3475912)