Interior fitout Renovation work in the office space of National Investigation Agency NIA at Talkatora, New Delhi

CEMENT CONCRETE : Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring and

shuttering-all work upto plinth level.

4.1.8 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) CUM 103.28 6,812.00 7,03,543.36

RAISED FALSE FLOOR : Providing and fixing removable raised/false access flooring with systemand its components of approved make

for different plenum height with possible height adjustment upto 50 mm, comprising of modular loadbearing floor panels supported on

G.I. rectangular stinger frame workand G.I. Pedestal etc. all complete, as per the architectural drawings, as specified and as directed by

Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm

outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal

head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud

for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to

the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.

(b) Stringers system in all steel construction hot dipped galvanized ofrectangular size 570x20x30x0.80mm thick having holes at both

ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all directions,

the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate solid, rigid

11.54 support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom of the floor for

1.02 electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the Engineer-in-charge.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H

grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64

hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum

64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and

cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight

foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto

1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs

applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand

and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved

manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to

ensure the quality of the product.

11.54.2 450 mm Finished Floor Height (FFH). SQM 18.2 5,977.35 1,08,787.77

ALUMINIUM SKIRTING : Supply of 100 mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish. Thickness

1.30 to 1.50mm. Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

ENGINEERED WOODEN FLOORING Panel 1820x145 Total thickness 14 mm Numbers of panels per pack 6 Nested Lengths Max. 1

plank out of 6 m2 per pack 1,583 m2 Kg per pack 11,99 kg Toplayer PEFC controlled sources EN 13489 ± 3 mm Core board PEFC

controlled sources Spruce Backing layer PEFC controlled sources Wood Veneer 2 mm Tongue and groove Length Uniclic Width Uniclic

Multifit Domestic use Conditions in each pack 33 years Uniclic - Multifit connection Lifetime Commercial On request "Wood for Life"

Edge Protect + Provides a warranty on build-up of residue dirt along the edges due to maintenance over the years 10 years "Wood for

Life" Surface & Edge Protect + (lacquered products only) Provides a warranty on pollution of surface structure and a warranty on build-up

residue dirt along the edges due to maintenance over the years 10 years Surface layer Wood species Oak Origin Europe Finishing UV

1.04 M.R. cured Oiled finish 2 layers UV cured Lacquer Anti-scratch top coat 5 - 7 layers Natural variance Due to nature, visual surface can deviate SQM 0 3,541.00 0.00

from samples Surface treatments cf catalogue/website Nature Marquant Vibrant General aspect of installed EN 13489 Lipping -

difference in height (mm) ≤ 0,20 difference in width (mm) ≤ 0,20 cupping lengthwise % ≤ 0,1 cupping in width % ≤ 0,2 Dimensional

stability ISO 24339 Cupping short side max % ≤ 0,30 Changes 30 - 85 % RH Cupping short side min % ≥ - 0,20 Open joints short side

(mm) ≤ 0,20 Open joints long side (mm) ≤ 0,30 Underfloor heating Suitable of special installation instructions.or its equivalent

VITRIFIED TILES : Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the manufacturer) with

water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement

11.41A mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and

matching pigments etc., complete.

2 Digitally signed by AMIT

CARPET TILES : Providing and laying Carpet tiles of Yarn type Eco Solution Q® Nylon (Nylon 6) only; Multi-Level Pattern Loop,

manufactured using 100% solution dyeing process, Tiles of size 23cms x 91cms or equivalent as per direction of EIC and site

requirement with SSP® Soil Protection treatment TM or equivalent containing properties of Stain Repel, with Tile- 100% PVC Free/

100% Bitumen Free/ 100% Recyclable - backing system with recycled content, made from thermoplastic polyolefin compound with

reinforcing layer high-performance environments requiring modular flooring, having tufted yarn weight of 542.5 gsm/sqm and average

1.06 M.R. yarn density of Minimum 9143 oz/cu. yd. or more, Nominal total thickness 5.42 mm minimum, Radiant Panel class 1 rated (ASTM E648), SQM 128.7 2,283.00 2,93,822.10

NBS smoke < 450, Pill test -Passed, Anti Static Property less Than 3.5 kv, Texture Appearance Retention Rating of 3.5 for Severe Use,

Anti Microbial Treatment-Passes (AATCC-174). CRI Green Label Plus is certified for indoor air quality, including fixing/ installation with

Low/ Zero VOC content Adhesive. Impact Sound (ISO 10140-3) 20 dB & Sound absorption (ISO 354) 0.2 Class D.or equilent as per

direction of EIC and site requirement

IPS FLOORING : 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4

(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener consisting of mix

1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg

1.07 11.4 of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. SQM 128.7 978.45 1,25,926.52

TOTAL FLOORING WORKS 60,44,351.00 3,26,097.10

2 FALSE CEILING WORKS

GYPSUM BOARD CEILING : Providing and fixing false ceiling at all height including providing and fixing of frame work made of special

sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange

fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of

25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels

45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm

with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I.

intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter

2.01 12.45 channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help

of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section

and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish

of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3

layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and

also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed,

all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with

12.45.1 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) SQM 2840.20 1,355.80 38,50,743.16

BAFFLE CEILING: Providing & Installation of Baffle ceiling system comprises of 25 mm x 100 mm (30 mm width & 100 mm Height) U

Shape panels in RAL color finish. Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and length up to 4000 mm.

Panel shall be high corrosion resistance and good color stability. Centre to Centre panel gap will be 75 mm. Panels are fixed on to roll

formed carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color with cutouts to hold the panels in module of 50

mm at maximum 1200 m c/c. Carriers are suspended from the roof or truss by 6 mm dia. galvanized steel wire rod hanger with special

2.02 MR height adjustment suspension clip at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. SQM 0 4,000.00 0.00

Panels are factory cut in lengths up to maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side cap are used to cover

the edges of the panels.

3 Digitally signed by AMIT

STRETCHED FABRIC CEILING: Supply & installationof fabric false ceiling / wall formed out with TRANSLUCENT Printed fabric

coverings made out of polyester knitted fabric coated with Polyurethane (PU). The TRANSLUCENT Printed fabric width of 2m, 3m, 4.1m

&5.1m with weight of 200gm/m2, thickness of 0, 3 mm. The appearance of fabric is matt, smooth and uniform with blanq color and light

transmission of 50%. The tear strength of fabric should be accordance to CH: 4,5daN; TR: 6,5 daN. The fire rating should be accordance

to B-S1, d0. The fabric should be humidity resistant and free of carcinogenic substances(CMR) or volatile organic Compounds (VOC’s).

At labeling in accordance with the French decree no. 2011- 321, Oeko-Tex standard100 certified. Fabric should be installed with

approved manufacturer guidelines. It comes with 10- year manufacturer guarantee. The installation of TRANSLUCENT Printed fabric

should be dry installation & done at room temperature using PVC, Grippers. ceiling base to be made of MS or Wooden frame finishing

2.03 MR to a flush finish of tapered and square edges in desired design as per Engineer-incharge.Supply of LED Lights behind the Fabric Wall/ SQM 0 7,000.00 0.00

False ceiling in modules/ PCB with recommended wattage as per manufacturer's standards to give an effect of ambient lighting. LED as

per List of make or as per engineer incharge. LED spacing / Pitch should be atleast 73 -80mm with beam angle of 170 degree, Colour

temperature shoud be as per design intent 3000K/4000K/6000K. Wattage of 8-10W/mtr. LED modules/ PCB should be positioned

properly to provide an even light flow, casting noshadows or dark spots. LED Driver Cost included.

METAL CEILING : Providing and fixing GI Plain 84mm wide x15mm deep panel upto 6mtr, shall be roll formed out of 0.5mm thick

Powder Coated .The top coat of panel shall be 60 micron polyester coated finish in approved colour. The panel shall be factory cut in up

to 6Mtr OR required length. Accessories Detail: Carrier: 63mm deep, made out of 0.6mm thick steel backed with enameled black paint

2.04 MR having cut out to hold on panel in a module of 75mm closed. The joint of two carriers shall be joined by means of carrier splices SQM 286.858 1,870.00 5,36,424.46

maintaining a module of 75mm .4mm dia galvanized rod with special height adjustment butter fly clips made out of SS steel sheet. The

edge profile G.I.shall be matching with the panel.

SOUNDSCAPES ACOUSTICAL BLADES : Providing and Fixing SoundScpaes Acoustical blades which are 40 mm thick, flat glass fibre

panels with Humidity Resistance RH 90%, with factory fitted embedded metal insert with ¼” – 20 threading for fixing cable adjuster for

hanging application. Acoustical blades shall have sizes of 200x1200mm, 200x1600mm ,400x1200mm, 400x1600mm, 400x1800mm with

both side laminated scrim finished with uniform water based paint on all surface (including edges). Acoustical performance of 0.65

NRC(for 400mm high x 40mm thick baffles with 400mm on centre distance and overall depth of construction 1000mm) as per ASTM C-

423 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) in standard White color with

Light reflectance 87% or in the color specified by the engineer in charge (Shell / Tangerine / Cranberry / Moss / Kiwi / Reef / Lagoon),

Fire Performance Class B2 – s1, d0 as per EN 13501-1 .The blade shall be made of Glass fibre panel with density of 110-120 Kg/ m3.

SUSPENSION: The Soundscapes Baffle shall be installed at a Centre to centre distance of 200mm The panel shall be hung using

hanging kit comprising of griper structure anchor & cap of dia 20mm, spring loaded bottom end cable adjuster of dia. 9mm and 2.4m long

aircraft cable of 1/16” dia. Components 1) Griper structure anchor 2) Gripper anchor cap 3) Cable adjuster 4) Aircraft Cable Cable

2.06 MR adjuster Spring loaded bottom end cable adjuster of dia. 9mm and 45mm long Aircraft cable Material Galvanized Steel Aircraft cable SQM 0 2,500.00 0.00

dimension 1/16” Ø x 2.4m Tolerance ±1mm. INSTALLATION: Hanger Wire Attachment to Structure: Attach the gripper structure anchor

to the structure with an appropriate fastener (1/4"-20 Threading) that will carry the full weight of the blades. Insert the end of the cable

into the gripper anchor cap. Screw the gripper anchor cap completely into the gripper structure anchor. Insert Suspension Cables: The

panel is to be suspended using the aircraft cables which are suspended from the soffit using the gripper structure anchors and its other

end passing through the bottom end cable adjuster. The height & level of the panels can be adjusted using the bottom end cable

adjusters.Suspension of Blade: Locate the two factory fitted female inserts on the blades. Suspend the Blades by screwing the bottom

end of the cable adjuster into the female inserts. Installation should be carried out as per Manufacturer recommended procedure.

GYPSUM LOUVERED CEILING : 12.5 x 600 x 600 high grade, glass-fibre reinforced, acoustic, gypsum panel with acoustic perforation

as Unity 3 - square 3.5x3.5mm c/c 8.33 type U3.The tiles with Strip shall be screw fixed on min. 60mm wood or steel furring. The with

strips tiles are with edge B+ and are pre-painted ready for installation on site. screws, type Torx 15, with white-painted head are used for

screw-fixing. The acoustic tiles are furnished with a grey (white) absorbent felt backing with an airflow resistance of 330-460 Ns/m³ (DIN

53887).Colour - White, NCS 0701 Y24R, gloss 5 (standard) or re-paintable at site with water based acrylic paint.Closest match for

2.07 MR repainting: NCS 0700/RAL 9003. Paint Type - Waterbased acrylic emulsion paint including titanium for hygienic indoor climate. Light SQM 0 14,000.00 0.00

Reflection: 69.2% according to DIN Norm 5036.Acoustic Property - αw: 0.95; NRC: 0.90.Fire Class - A2-s1,d0 .Suspension - The ROLD

12 must be screw fixed to furring of 22 mm wood or 60mm steel battens at 300 mm c/c.

4 Digitally signed by AMIT

ACOUSTIC CEILING :Providing and fixing suspended Demountable acoustic ceiling in recessed grid system - Belgravia 300 x 1200

x12.5mm E with Unity 3,square 3.5mm holes, with 0.80 NRC*Material: High Grade Glassfiber Reinforced Perforated plasterboard with

Cleaneo Technology Board type: Ceiling tile Length x width x thickness: 300X1200X12.5mm Edge: E recessed grid system ( 8mm

Perforation: Unity 3, 3.5x3.5 Surface: Water-based acrylic paint ,Colour: White NCS 0701 Y24R, closet match to RAL 9003; gloss 5

TOTAL FALSE CEILING WORKS 38,50,743.16 5,36,424.46

3 WALL FINISHES WORKS

GLASS PARTITION(FIXED GLASS PARTITION WITH 10MM GLASS) : Supply & Insallation of partition sleek series aluminium profile

with Clip- on / U-Section of size 30mm x 21mm with 2.5mm Wall thickness in matt black/ natural Alu finish with suitable gaskets for

insertion with 10mm thick clear toughened glass. It consists of two way Polycarbonate I profiles, 90 Degree L Junction and T Junction

profiles. Transparent profile to be applied on the glass shim for glass wall systems Supplied with double sided adhesive tape. Profile to

3.01 MR be inserted in the joint instead of sealing to give continuity glas effect and suitable fasteners for fixing profiles including installation SQM 768 4,400.00 33,79,200.00

FRAMELESS HINGED GLASS DOOR : Supply & Insallation of door sleek series Door Profile frame of size 45X60x45mm or any other

size as per the site requirement along with necessary seals, door to be fixed on Hinges & Lock with lever handle for rebated door in matt

black/ natural Alu finish with Top Mounted Door closer with Slide Channel on Top and saddle plate for fixing on the Glass door suitable

for 10mm thick clear toughened glass and necessary seals to be provided all around the door frames. Hardwares should match colour of

door frames and profiles. All necessary hardware should be in same colour including Hinges and minimum 3 hinges are required in each

door depending on door size. Necessary Hardwares includes Lock with Lever Handles, Seals, Hinges & door closers as per Engineer

3.02 MR incharge/ client choice. Installation rates should be inclusive and vendors shall provide end to end solution. Lever handle should be Solid NOS 63 22,540.00 14,20,020.00

in aluminum alloy in curved/square shape as per Engineer incharge/client choice Finish: Aluminium Anodized (Silver) - Black matt

finish/or any other color.The glass door shall include all hardwares such as D-type Handle Material : Stainless Steel. Finish : Satin

Stainless Steel (SSS). of approved make and model all complete as per the direction of Engineer-in-charge.

WOODEN DOOR FRAMES : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed

and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

9.1 separately).

9.1.1 Second class teak wood CUM 1.989 1,42,949.70 2,84,326.95

WOODEN BATTENS : Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling

8.27 necessary holes for rawl plug etc. including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood CUM 2 1,87,277.65 3,74,555.30

FLUSH DOOR SHUTTERS : Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,

core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or

3.05 cross bands and face veneers on both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws SQM 107.1 2,392.65 2,56,252.82

WOODEN LIPPING : Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door

3.06 9.23 shutters (over all area of door shutter to be measured). SQM 3.213 462.35 1,485.53

Providing and Fixing 1236-22x922 mm D-type Handle Material : Stainless Steel. Finish : Satin Stainless Steel (SSS). of approved make

and model all complete as per the direction of Engineer-in-charge.

Providing and Fixing SS Mortise Lock Body SB/TB for door thickness 25-50 mm for of approved make and model all complete as per

the direction of Engineer-in-charge.

5 Digitally signed by AMIT

Providing and Fixing Double cylender Floor Spring- with Closing Force EN 3 with Maximum door weight 105 Kg. Maximum door width

950mm.Closing speed : 130°

3.09 MR Final closing speed : 15-0°. Hold Open (standard): 90° hold open. Weight of floor spring approx : 6kg, 5,00,000 cycles Tested with 5 Each 114 5,395.00 6,15,030.00

Years Warranty against manufacturing defect. CE certified for wooden doors all complete as per the direction of Engineer-in-charge.

Providing 40x5mm flat iron hold fast 400mm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and

3.1 9.53 embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal EACH 60 228.85 13,731.00

Providing and Fixing top and Bottom Strap of approved make and model all complete as per the direction of Engineer-in-charge.

Providing and Fixing Dead lock Back set- 50 mm with Key Hole of approved make and model all complete as per the direction of

Engineer-in-charge.

Providing and Fixing 1060- 60 mm SS Cylinder One side knob and one side regular key (3 key) for wooden doors of approved make

3.13 MR and model all complete as per the direction of Engineer-in-charge. Each 15 798.00 11,970.00

GLASS FILMS : Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-

blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having

minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7

kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) Contractors payment

wouldn't be released until & unless he/she produces orginal warranty certificate from the manufacturer.

Providing and fixing Bollard Channelled woodwork acoustic wall panel of width of 192/132/128mm with finishing of 15 mm thick Grooved

wooden acoustic panel of size 2420 mm, Groove Size 3.2mm at an interval of 21mm/28 mm c/c as per acoustic design / Engineer

incharge/ client approval, the wooden acoustic panels to be backed with black acoustic fleece with NRC of 0.45 (NRC 0.8 with 50mm

3.16 MR GW of 48kg/m3).the edge of panel shall be Tounge and groov to be fixed with clips on aluminium profile designed specially fo the panel. SQM 173 2,650.00 4,57,920.00

the panel will be mounted with the help of clips on Bollard Aluminium extruded Keel. The grooved acoustic panel laminated in desired

shade as per Engineer In charge / Architect’s approval.

Providing and fixing woodwork 16mm thick forming 600x600 mm tiles with Tegular edge. Perforation in the panel will be of

6mm/8mm/10mm or as per Engineer incharge/ client approval, the wooden ceiling panels to be backed with black acoustic fleece with

NRC of 0.4 (NRC 0.8 with 50mm GW of 48kg/m3). The grid should be of 24mm/15mm wide T - section flanges color Black. The main T

runner with length and size of 24X38mm/ 15X38mm made from .30mm thick sheet spaced at 1200mm Centre to Centre and cross T of

3.17 MR size 24X25mm / 15X25 made of .3mm thick of 1200mm long spaced between main T at 600mm center to centre to form a grid of SQM 133.2 2,450.00 3,26,340.00

1200X600mm and second cross T of length 600mm and size 24X25mm/15X25mm made of 0.30mm sheet to be interlocked at middle of

the 1200X600 mm panel to form grid of 600X600mm and wall angle of size 19X20 The Wooden acoustic panel laminated in desired

shade as per Engineer In charge /client approval.

LACQUERED GLASS : Providing and fixing of 6 mm thick premium GRIHA rated Lacquered glass of approved color byEngineer

incharge/ client/ Customer, fixed with compatible neutral grade silicon on a perfectly levelled 12mm thick water proof marine plywood /

MDF / Mineral fibre board which is mounted on RCC wall/any other structure. Lacquered glass must be made industrially (using curtain

coating process); opaque (if viewed against a support wall), uniformly coated with PU lacquer (50 micron thick coating or more); panel to

3.18 MR panel colour consistency (measured by photo spectrometer); highly durable (passes hardness test for minimum 220 oscillations); SQM 0 3,150.00 0.00

humidity resistance (conforms to BS EN 1036 1999 or equivalent) ; environmentally friendly having Low VOC (no lead, no arsenic, no

copper, no formaldehyde), low VOC content <100g/l. Silicone used should not react with lacquer coating (compatible neutral cure silicon)

6 Digitally signed by AMIT

GYPSUM BOARD PARTITION : Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including

providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both

side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor

and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener

or metal screws with nylon plugs and the studs 48mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed

vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts,

including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at

spacing of 450mm centre to centre, and fixing of boards to both side of frame work by 25mm long dry wall screws on studs, floor and

ceiling channels at the spacing of 300mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid

3.19 through cracks, M.S. fixing channel of 99mm width (0.9mm thick having two flanges of 9.5mm each) to be provided at the horizontal

joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with

recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer

suitable for board as per manufacturer's specification and direction of engineer in charge all complete.

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to

9.105.1 IS: 2095: part 3 (Board with BIS certification marks) SQM 1828.8 2,131.10 38,97,355.68

ACRYLIC SOLID SURFACE CLADDING : Providing & fixing of straight Paneling for walls & Columns structures anchored in floor slab &

celling, cladded with Acrylic Solid Surface 12mm thick sheets straight fabricated on a single face, finished in matte finish, pasted with

industrial grade silicon on a robust substrate. Substrate shall be with suitable MS box sections [Appx. 15 to 20 kg/ Sqm] as per structural

requirement & duly painted with anti-rust red oxide coating and covered with 12 mm thick water proof ply as per the design and

3.2 MR dimensions approved. The proposal includes the cost of preparing appropriate substrate surface over the civil structure provided, along SQM 50 9,175.00 4,58,750.00

with material cost & installation / fixing on straight walls etc. FOR ALL WALL CLADDING, TABLE TOPS ETC. COMPLETE

ROLLER BLINDS : Providing & supplying of Window Blinds as per the approved sample in required shade and style consisting, of

Roller Blinds comprising of optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sq m,

Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .The tear resistance

should be complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for quick,easy and safe

installation,moulded plastic with steel spring support and inserted into the tube end. It shall be driven by a ball chain pulley with ball chain

and can be positioned at right side or left hand side of the Shade. The Shade when lowering or raising, shall be automatically locked in

position upon release of the ball chain by means of a built in friction lock.Universal clutch for left and right hand operation.Chain Gear

Ratio of 1.75:1.The END PLUG shall be molded of plastic witha steel location pin. The plug shall be inserted into the tube end. (Opposite

to the Drive Unit) for ease of installation. TheSUPPORT BRACKETS shall be of coated steel & provided with covers and used in right

3.21 MR hand or left hand positions differentiated by the acceptance of the of the rectangular drive unit support or the round idler plug pin.Can SQM 600 1,665.00 9,99,000.00

beinstalled (a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess. The Bracket should be protruding outside maximum of80mm.The

ROLLER TUBE shall be of extruded aluminum with 37mm internal diameter & skin thickness of 1mm and shall incorporate a key way

integral with the tube to accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom made up of powder coated steel. The

BALLCHAIN shall be 2mm diameter cord with 4.5mm diameter acetal balls moulded co-axially to it on 6mm pitch to form an endless

ballchain.It is used for raising or lowering action of the shades.hall be suitable for sill, face or side facing. Cord Equalizer shall be

injection melded from impact modified acrylic with a high flexural modulus

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line with external glazing as per details of

3.22 MR Architect. Rate to include finishing exposed surfaces of the Pelmet with enamel paint of approved shade or 1mm laminate. RM 400 575.00 2,30,000.00

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to

3.24 floor V level.

6.13.2 Cement mortar 1:4 (1 cement :4 coarse sand) Sqm 233.6 1,123.80 2,62,519.68

3.25 6.15 Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry. Sqm 233.6 104.80 24,481.28

13.4 12 mm cement plaster of mix :

3.27 13.26 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. Sqm 500 262.70 1,31,350.00

7 Digitally signed by AMIT

13.61 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :

13.61.1 Two or more coats on new work SQM 4410.8 155.90 6,87,643.72

PLY : Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and

9.140 fixed on wooden /steel frame work, complete as per direction of Engineer-in-Charge

9.140.1 12mm thick commercial ply conforming to IS : 1328 BWR type SQM 624.64 1,224.65 7,64,965.38

4MM THICK MDF BOARD : Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved

3.2 MR primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in-Charge

4mm thick MDF Board SQM 497.76 414.00 2,06,072.64

FRAME : Providing and fixing metal system up to ceiling height, which includes frame work made of special section power pressed/ roll

form G.I. sheet with zinc coating of 120 GSM, consisting of Boral U track 52mm wide having equal flanges of 30mm and 0.55mm thick

(Base metal thickness) fastened to the floor slab and ceiling soffit using rawl plugs with screw at 600mm centers, with first & last fixing

3.31 MR point at not greater than 50 mm from either end. Boral C studs 50mm wide having one flange of 34mm, other flange 36mm, lip size 6 mm SQM 624.64 659.00 4,11,637.76

and 0.55mm thick installed perpendicularly within the flanges of floor and ceiling channels located directly opposite to each other at not

more than 610mm centers. Maintain 5 to 10mm gap between C Stud and web of U Track.

LAMINATE : Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high

density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive

of approved quality.

THERMAL INSULATION : Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having

3.33 12.57 density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawel plug & washers and held in SQM 2453.44 358.50 8,79,558.24

position by criss crossing GI wire etc. complete as per directions of Engineer-in-Charge.

3.34 MR WALLPAPER design and pattern shall be approved by Client/Engineer in charge SQM 150 1,076.00 1,61,400.00

TOTAL WALL FINISHING WORKS 85,05,356.45 97,95,039.60

4 MISCELLANEOUS WORKS

MODULAR KITCHEN - UNDER COUNTER STORAGE CABINETS:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient

number of drawers made of 18 mm thk. ISI Marked comm. ply , all ply to be laminated with 0.8 mm laminate.All shelves should be

supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia

shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high

4.01 MR gloss acrylic of approved. The cabinet boxes of floor units will be supported by 100mm height vertical adjustable legs which will be SQM 18 7,658.00 1,37,844.00

covered with PVC skirting in brushed aluminum finish attached by hardware of skirting. The unit shall be fixed to the floor/ wall/slab using

metal screws of appropriate size and rawl plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be

considered for measurement and payment. Cabinet boxes size would be varies from 400X560X710MM to 1000X560X710MM (approx.)

and join together as per site requirements etc.

MODULAR KITCHEN - OVERHEAD STORAGE WALL UNITS:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and sufficient

number of drawers made of 18 mm thk. ISI Marked comm. ply. All ply to be laminated with 0.8 mm laminate.All shelves should be

supported on approved quality SS pins and shall be adjustable for different heights as per requirements.Shutters and drawers fascia

shall be at least 18mm thic with laminate on both sides with 18mm wide 2mm thick PVC edge banding, All Shutters finished in high

gloss acrylic of approved. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw plugs. Only front

face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment. Cabinet boxes size

would be varies from 400X560X710MM to 1000X560X710MM (approx.) and join together as per site requirements etc.

4.02A MR Providing and fixing of Innotech with metal sides and quadro channels Each 10 3,548.00 35,480.00

4.02B MR Providing and fixing baskets Each 10 4,013.00 40,130.00

8 Digitally signed by AMIT

WATERPROOFING : Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C.,

kitchen and the like consisting of: (i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming

to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface. (ii) IInd course of 20 mm cement

plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of

4.03 22.3 vertical and horizontal surface. (iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area. (iv) IVth SQM 175 769.60 1,34,680.00

course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen

SHOP DRAWINGS : Preparation of complete set of shop drawings including finishing, MEP services, details, design calcualtions etc.

4.04 MR and any other details as and when desired by Engineer Incharge/ client. A qualified professsional for the purpose shall be appointed after LS 1 4,00,000.00 4,00,000.00

due appproval from Engineer InCharge.

DISMANTLING : Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling and any other items to be

4.05 MR dismantled including disposal of unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed LOT 1 3,50,000.00 3,50,000.00

by Engineer-in-Charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position

4.07 10.2 and applying a priming coat of approved steel primer all complete. Kg 6400 133.70 8,55,680.00

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and

10.16 applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

10.16.2 Hot finished seamless type tubes Kg 4000 206.35 8,25,400.00

Providing and fixing roofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering

over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on

4.09 26.65 structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be SQM 160 1,525.60 2,44,096.00

paid separately).

4.20.1.4 Concrete of M25 grade with minimum cement content of 300 kg /cum cum 15 9,439.05 1,41,585.75

5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more kg 1200 107.85 1,29,420.00

Providing and fixing Toilet cubicals with the following specifications

Thickness of Compact Laminate : min 14 mm

Color of HPL Boards: As approved by Engineer-in-charge

Size of Cubicle : As per drawing

Door Size : 1995mm (H) x 610mm (W)

Divider Size : 1995mm (H)

Overall Height Of Cubicle : 2100mm (Including boom Gap of 100mm)

Accessories: Standard - Stainless Steel - 304 Grade accessories)

a) SS "U" Channel

b) SS "F" channel

c) SS Coat Hook

d) SS Privacy Thumb turn c/w Occupancy Indicator

e) SS Door Knob

f) SS Hinges with Cover

g) SS Shoe Box Leg 18mm - 316 Grade

h) Rubber Lining for Groove

i) S.S.Screws 304 G & P .V.C Wall Plugs

Providing and fixing Urinal partitions with the following specifications

Thickness of Compact Laminate : min 12 mm

Color of HPL Boards: As approved by Engineer-in-charge

Size of UMP : 1200 mm (W) X 500 mm(H) AND 900 mm (W) X 450 mm(H)

Overall Height Of Cubicle : 1850 mm (Including bottom Gap of 650mm)

Accessories: Standard – Stainless Steel - 304 Grade accessories)

a) Right Angle Brackets

b) S.S.Screws 304 G & P.V.C Wall Plugs

9 Digitally signed by AMIT

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open

grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis &

design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make

it watertight including checking of all the structural and functional design.

(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of

approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core

sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated,

with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer

(Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods

4.12 8.32 c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the Sqm 90.00 5015.05 451354.50

wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic

contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the

cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the

assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium

composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the

relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance

characteristics all complete , as per the Architectural drawings, as per item descriptioy 25mm long dry wall screws on studs, floor and

ceiling channels at the spacing of 300mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid

through cracks, M.S. fixing channel of 99mm width (0.9mm thick having two flanges of 9.5mm each) to be provided at the horizonta

TOTAL MISCELLANEOUS WORKS 27,82,216.25 15,68,126.00

10 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

S NO TOTAL AMOUNT TOTAL AMOUNT

S NO TOTAL AMOUNT TOTAL AMOUNT

NO DESCRIPTION UNIT QUANTITY RATE

2023 DSR (INR) NON-DSR (INR)

Supply, Installation, Testing and Commisioning of SINGLE LEVER CONCEALED BASIN

MR 1 MIXER (WALL MOUNTED) WITH SPOUT (COMPOSITE ONE PIECE BODY) EACH 23 6650.00 152950.00

Supply, Installation, Testing and Commisioning of TABLE TOP BASIN, SIZE:

Supply, Installation, Testing and Commisioing of suitable compatible WASTE COUPLING

MR 3 32MM- FULL THREAD- WITH CERAMIC CAP-*130MM HEIGHT *65MM CERAMIC CAP EACH 23 1250.00 28750.00

Supply, Installation, Testing and Commisioing of BOTTLE TRAP (WITH INTERNAL

MR 4 PARTITION) 32mm SIZE WITH 300mm & 190mm LONG WALL CONNECTION PIPES & EACH 23 2056.00 47288.00

Supply, Installation, Testing and Commisiong of RIMLESS, BLIND INSTALLATION WALL

MR 5 HUNG WC WITH UF SOFT CLOSE SLIM SEAT COVER, HINGES AND ACCESSORIES EACH 23 8645.00 198835.00

SET, SIZE: 375X520X400 MM

MR 6 Supply, Installation, Testing and Commisiong of PNEUMATIC CONTROL PLATE EACH 23 3523.00 81029.00

Supply, Installation, Testing and Commisiong of ANGULAR STOP COCK WITH WALL

Supply, Installation, Testing and Commisiong of CONCEALED STOP COCK WITH

MR 8 ADJUSTABLE WITH WALL FLANGE 15mm EACH 23 3150.00 72450.00

Supply, Installation, Testing and Commisiong of HAND SHOWER (HEALTH FAUCET) WITH

MR 9 8mm DIA 1.2 METER LONG FLEXIBLE TUBE EACH 23 1650.00 37950.00

Supply, Installation, Testing and Commisiong of PNEUMATIC SINGLE PIECE SLIM

CONCEALED CISTERN BODY WITH INSTALLATION KIT & “S-TYPE” DRAIN PIPE

MR 10 CONNECTION SET FOR WALL HUNG WC (WITHOUT FLUSH CONTROL PLATE) EACH 23 4640.00 106720.00

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28 complete.

17.28.2 Flexible pipe

Providing and fixing mirror of superior glass (of approved quality) complete with 6mm thick 36982.85

hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved

13 quality conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 50 574.30 28715.00

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse

17.61 sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and

pointing in cement mortar 1:4 (1 cement : 4 coarse sand) :

18.76 Cutting holes upto 30x30cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 23 416.80 9586.40

Digitally signed by AMIT

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching

18.78 16 surface after housing G.I. pipe etc. METRE 23 202.90 4666.70

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the

18.7 pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step

CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

17 20mm nominal outer dia pipes 335.00 16750.00

18.7.3 25mm nominal outer dia pipes METRE 50 401.55 20077.50

18.7.4 32mm nominal outer dia pipes METRE 100 518.75 51875.00

18.7.5 40mm nominal outer dia pipes METRE 20 702.95 14059.00

18.7.6 50mm nominal outer dia pipes METRE 20 934.15 18683.00

18.8 18 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for

hot & cold water

Concealed supply, including

work including all CPVC

cutting chases plain

making goodthreaded

the wallsfittings,

etc., i/c fixing the pipe

18.8.1 15mm nominal outer dia pipes METRE 80 497.80 39824.00

18.8.2 20mm nominal outer dia pipes METRE 100 537.60 53760.00

18.8.3 25mm nominal outer dia pipes METRE 50 627.25 31362.50

18.8.4 32mm nominal outer dia pipes METRE 30 739.30 22179.00

18.51 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS

19 standards and weighing not less than 690 gms.

18.51.1 15 mm nominal bore EACH 4 798.95 3195.80

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for

soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels,

clamps, rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp &

hangers etc. in concealed / inside duct / under floor & basement ceiling / external work etc.

including chase cutting as required, excavation and back filling in all kind of soils, suspended

from floor under false ceiling or embedding the pipes laid under floors / building in 75 mm.

alround 1:2:4 cement concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm

20 nominal size) including cost of shuttering for proper completion of the work, breaking and

MR making good the walls and floors etc. after pipes have been duly laid and tested. The rubber

ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on

50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications and as directed by engg-

in-charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 200.00 536.00 107200.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 40.00 416.00 16640.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6

Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces,

enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by

MR 21 clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with

cement concrete 1:2:4 complete as required.

Digitally signed by AMIT

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating

MR 22 complete in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 60 536.00 32160.00

MR 23 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 50 726.00 36300.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round

cover with screws and other required fitting complete as required.

Supply, Installation, Testing and Commisiong of HIGH FLOW SINGLE LEVER CONCEALED

MR 27 DIVERTOR FOR BATH & SHOWER

Supply, Installation, Testing and Commisiong of SPOUT FOR BUILT IN BATH/SHOWER

Supply, Installation, Testing and Commisiong of OVERHEAD SHOWER 350x350MM ROUND

MR 29 EDGE SQUARE HEAD SINGLE FLOW (BODY & FACE PLATE STAINLESS STEEL WITH EACH 3 11500.00 34500.00

CHROME PLATED) WITH RUBIT CLEANING SYSTEM

MR 30 Supply, Installation, Testing and Commissioning of 15 litre geyser EACH 3 7480.00 22440.00

MR 31 Supply, Installation, Testing and Commisiong of SOAP DISH HOLDER EACH 3 3150.00 9450.00

MR 32 Supply, Installation, Testing and Commisiong of TUMBLER HOLDER EACH 3 3150.00 9450.00

Supply, Installation, Testing and Commisiong of TOWEL RACK 600MM LONG WITH

MR 33 LOWER HANGER

MR 34 Supply, Installation, Testing and Commisiong of ROBE HOOK EACH 3 2045.00 6135.00

MR 35 Supply, Installation, Testing and Commisiong of TOILET ROLL HOLDER WITH COVER EACH 27 3245.00 87615.00

MR 36 Supply, Installation, Testing and Commisiong of TOWEL HOLDER EACH 3 3336.00 10008.00

Providing and fixing white vitreous china battery based infrared sensor operated urinal of

approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml

17.80 37 consumption), having water inlet from back side, including fixing to wall with suitable brackets Each 12 7979.20 95750.40

all as per manufacturers specification and direction of Engineer-in-charge

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I.

5 17.10 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting

and making good the walls wherever required :

17.10.1 Kitchen Sink with Drain Board

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC conduit,

1.10 with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm.

FRLS PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent

switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface

1.55 / recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single

A.3 1.12 core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS Metre 17550 334.00 5861700.00

PVC insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 1161 122.00 141642.00

1.24.5 6 pin 15/16 amp socket outlet Each 142 197.00 27974.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box

A.6 1.26 excluding modular plate as required. Each 200 40.00 8000.00

Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC

1.14 insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 20 233.00 4660.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 100 439.00 43900.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 600 1005.00 603000.00

Digitally signed by AMIT

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 600 1365.00 819000.00

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1

KV grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

Conductor Cables :

Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor

armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively &

(b) 3.5 C x 95 Sqmm XLPE cable RM 400 710.00 284000.00

(c ) 3.5 C x 70 Sqmm XLPE cable RM 100 587.00 58700.00

(d) 3.5 C x 50 Sqmm XLPE cable RM 40 421.00 16840.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 100 310.00 31000.00

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit

2.10 breaker suitable for inductive load of following poles in the existing MCB DB complete with

D.2 connections, testing and commissioning etc. as required.

2.15 Supplying and fixing following rating, four pole, (three phase and neutral),415 volts, residual

1.4 current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral

2.4 bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as

D.4 required. (But without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 22 9081.00 199782.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts,

2.14 residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in

the existing MCB DB complete with connections, testing and commissioning etc. as required.

Digitally signed by AMIT

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

Supply, installation, testing & Commissioning of Specific Backbox for Carpet for Floor Box

along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and

single cable outlet/ glavanized steel, paint RAL 7031 for floor box . The item should be

complete in all respects

Supply, installation, testing & Commissioning of Specific Backbox for Wooden/Tile Flooring for

Floor Box along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for

E.4 MR headband and single cable outlet/ glavanized steel, paint RAL 7031 for floor box. The item Set 4 6410.00 25640.00

should be complete in all respects

Supplying and fixing following modular switch / socket on the existing modular plate & switch

1.24 box including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 41 148.00 6068.00

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge .Or equivalent

MR specifications or as per the site requirement. The Thickness of raceway should be of suitable

size to accumulate the min number of wires/ Cables as per the standard capacity of raceways.

(f) 50 mm-150 mm as per site conditions Mtr 750 536.78 402587.81

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at

the intersection of raceways supplied completely with base and cover plates, height adjustable

junction boxof suitable mm including all accessories complete in all respect as per the

MR directions of engineer in charge Or equivalent specifications or as per the site requirement.The

Thickness of Junctions should be of suitable size to accumulate the wires/ Cables as per the

E.10 standard capacity..

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.11 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 1230 47.00 57810.00

surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed

E.12 conduit as required

Supplying and Installation of following size perforated of painting with powder coating M.S.

cable trays of perforation of not more than 17.5% in convinient sections, joined with connectors

4.1 suspended from the cieleing with MS suspenders including bolts and nuts painting suspenders

etc as required

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 500 1137.00 568500.00

Digitally signed by AMIT

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe of SET 5 13838.00 69190.00

2.7 metre long etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 200 70.00 14000.00

G PANEL BOARDS

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with

rear access for cable alley and with segregated bus-bar chamber with tinned aluminium bus

bar and including supplying and fixing following switchgears, meters and accessories, inter-

connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:or its equivalent as per the requirement of sites

conditions . The current carrying capacity of Busbar/MCB or numbers of MCB may vary as per

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 200 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 250 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB -4 Nos.

(b) 40 Amps, TPN, MCB - 11 nos

Panel complete as above Each 4 159869.00 639476.00

15 MR UPS Panel

Digitally signed by AMIT

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with

rear access for cable alley and with segregated bus-bar chamber with tinned aluminium bus

bar and including supplying and fixing following switchgears, meters and accessories, inter-

connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram::or its equivalent as per the requirement of

site.The current carrying capacity of Busbar/MCB or numbers of MCB may vary as per the site

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

detailed in the Specifications

Colour: Gray Powder Coated, as per approved sample.

Three (3) nos, 63 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault

breaking capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

2 Nos. 100A, 4P, MCCB (25kA) with phase indicating lamp protected with 2A, SP, MCB's

along with E/M interlocking

(a) 63 Amps, TPN, MCB - 2 nos

(b ) 40 Amps, TPN MCB - 6 nos

Panel complete as above Each 2 138500.00 277000.00

G PANEL BOARDS

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick

CRCA sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors

fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with

rear access for cable alley and with segregated bus-bar chamber with tinned aluminium bus

bar and including supplying and fixing following switchgears, meters and accessories, inter-

connections, bonding to earth, powder coated painting and marking as specified. Switch

boards complete as per schematic diagram:or its equivalent as per the requirement of site

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as

G.1 MR detailed in thePowder

Colour: Gray Specifications

Coated, as per approved sample.

Digitally signed by AMIT

1 nos, 400 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

Bus Bars:25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 500 Amps capacity with heat shrinkable colored

sleeves and I/C DMC/SMC bus bars supports at required intervals complete for cross section,

size supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 100 Amps, TPN, MCCB -2 Nos.

(a) 63 Amps, TPN, MCB -8 Nos.

(b) 40 Amps, TPN, MCB - 6 nos

Panel complete as above Each 0 215610.00 0.00

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2

mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on

front side as required

Providing and fixing HT danger notice plate of 250mm x 200mm made of mild steel, atleast 2

18 2.22 mm thick, and vitreos enamelled white on both sides and with iscription in single red colour on Nos. 2 292.00 584.00

front side as required

Supply, Installation, Testing and Commissiong UPS of required capacity with True Online

Double Conversion UPS 3Phase Input - 3Phase Output in Parallel Redundant N+1

Configuration IGBT Based Rectifier and IGBT Based Inverter, Batteries of suitable capacity/

Voltage, SMF Amararaja/Exide with minimum VAH capacity suitable for 30 minutes backup

Along with Accessories Rack, Interlinks, SFU, Parallel Kit, DC Cable Upto 10 /or as per site

requirement Meters complete in all respect as per the directions of the engineer in charge.

MR UPS should have availability of Input /Output isolator, Inbuilt manual bypass along with phase KVA 80 21611.00 1728880.00

sequence corrector. Unity PF (Approx) .UPS Efficiency shall not be less than 90% from 25% to

100% Load or its equivalent specifications. Distrubution of UPS KVA/size cabinet & batteries

shall be as per the site requirement.

MR SITC of UPS Incomer Panel /Enclosure with TPN MCCB/MCB of Suitable capacity of 63/100 A

or of higher capacity (MCCB) to bear the load , inclusive of other fittings complete as per the

site requirements

MR SITC of UPS Outgoing Panel having Copper BusBar of Min 200 A or of sufficient capacity to

bear the load with Enclosure & other fittings complete as per the site requirements

Total of Electrical items 13262871.00 4433030.23

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Description Unit QTY Rate DSR AMOUNT NON DSR AMOUNT

Supply, Installation, Testing and Commissioing of 4'x1' Pendant mounted LED

Panel luminaire with system power : 36W, having efficacy of 100lm/W having

glare free lighting .Color Temperature of 4000K-6500K or as per the section of

client, Powder coated , Internal wiring along with Integral Electronic Driver

having an in built Surge Protection of 2.5kV, min IP20 having ,Panel Length -

1200mm or as per the selection, Net Width - 300mm or as per the section,

along with Suspension wire for Pendant mounting/ Or Recess or its equivalent

specifications.

Supply, Installation, Testing and Commissioing of Round shaped Recess

Mounted Fixed type COB LED Ceiling Downlighter Luminaire with Translucent

Cover with system power: 12W, having efficacy of 100lm/W having glare free

lighting .Color Temperature of 4000K-6500K or as per the selection of client,

Powder coated , Internal wiring along with Integral Electronic Driver having an

in built Surge Protection of 2.5kV, min IP20 having , or as per the selection,or

as per the section, along with Suspension wire for Pendant mounting/ Or

Recess or its equivalent specifications.

Supply, Installation, Testing and Commissioing of Linear Suspended mounted

LED Ceiling luminaire with Up-Downlight distribution 28W, having efficacy of

100lm/W having glare free lighting .Color Temperature of 4000K-6500K or as

3 MR per the selection of client, Powder coated , Internal wiring along with Integral no 83 2410.00 200030.00

Electronic Driver having an in built Surge Protection of 2.5kV, min IP20 having

, or as per the selection,or as per the section, along with Suspension wire for

Pendant mounting/ Or Recess or its equivalent specifications.

Supply, Installation, Testing and Commisioning of Round Ring shaped

Suspended mounted LED Ceiling luminaire with Downlight distribution with

Ring shaped Diffuser having system power: 70W, , Dia 1200 mm or as per the

site requirement, having efficacy of 100lm/W having glare free lighting .Color

4 MR Temperature of 4000K-6500K or as per the selection of client, Powder coated , no 14 12708.00 177912.00

Internal wiring along with Integral Electronic Driver having an in built Surge

Protection of 2.5kV, min IP20 having , or as per the selection,or as per the

section, along with Suspension wire for Pendant mounting/ Or Recess or its

equivalent specifications.

20 Digitally signed by AMIT

Supply, Installation, Testing and Commissioing of Round shaped Recess

Mounted Fixed type COB LED Ceiling Downlighter Luminaire with Translucent

Cover with system power: 6W, having efficacy of 100lm/W having glare free

lighting .Color Temperature of 4000K-6500K or as per the selection of client,

Powder coated , Internal wiring along with Integral Electronic Driver having an

in built Surge Protection of 2.5kV, min IP20 having , or as per the selection,or

as per the section, along with Suspension wire for Pendant mounting/ Or

Recess or its equivalent specifications.

Supply, Installation, Testing and Commisioning of Pendant Linear Track

luminaire with spots having Die cast aluminium housing, System power: 24W (

2 x ( 2 spots (in 300mm) of 6W each), the luminous flux of 2160 lm, having

efficacy of 100lm/W having glare free lighting .Color Temperature of 4000K-

6 MR 6500K or as per the selection of client, Powder coated , Internal wiring along no 20 5150.00 103000.00

with Integral Electronic Driver having an in built Surge Protection of 2.5kV, min

IP20 having , or as per the selection,or as per the section, along with

Suspension wire for Pendant mounting/ Or Recess or its equivalent

specifications.

21 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO DSR (E & M- DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

UNIT QUANTITY RATE

1 M.R. Supply and Installation of pressure independent rectangular VAV unit with integral sound attenuator

CFMGI sheet casing length 900mm consisting of 25mm thick 48kg/m3 density fiber glass Nos. 19 20280 385320.00

Supply, installation, testing and commissioning of Variable Frequency Drive (VFD)

4.0 380-400 VAC, IP-54 Chassis, RFI class A1 (C2), No brake chopper.

a VFD upto 5 HP or as directed by the engineer in charge Nos. 16.0 32110.00 513760.00

DUCT PRESSURE SENSORS

Supply, Installation and Testing of pressure sensors to be installed in supply air ducts. Quoted

5.0 MR price shall be inclusive of necessary conduting, copper control cabling from the sensors to the Nos. 8.0 15400.00 123200.00

respective VFDs as per "Approved Shop Drawings".

6.0 Tube Axial Fan

Supply Installation, testing and commissioning of supply air Tube Axial flow fan of following capacity

with GSS casing and aluminium alloy impellers with high efficiency aero-foil sections, blades, the

impeller directly driven by TEFC induction motor suitable for 3 Phase 50 Hz 415 V ± 10 %, complete

M.R. as required. This cost shall include the cost for suitable panel, DOL starter, breakers etc compete in all

respect as per the directions of engineer in charge.

9000 cfm at 15 mm static presuure for fresh air/exhaust air With Class "H" insulation. NOS 8.0 98118.00 784944.00

Supplying, Fixing, testing and commissioning of fire dampers in supply air duct/main branch and return

air path as and where required of required sizes i/c control wiring,the damper shall be motorized and

spring return so as to close the damper in the event of power failure automatically and open the same

in case of power being restored. The spring return action shall be inbuilt mechanism and not externally

7.0 16.20 mounted. The damper shall also be closed in the event of fire signal complete as required and as per

specifications.

(Fire damper shall ve suitable for 120 minutes fore rating as per NBC norms)

GI Gravity Louver

Supply, installation, testing and commissioning of GI Gravity Louver complete with neoperene rubber

gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.

9.0 VOLUME CONTROL DAMPER

Digitally signed by AMIT

Supply, Installation and Testing of GI box type volume control dampers as per the specifications and

shop drawings. SQM 20.0 7046.00 140920.00

Insulated Flexible Duct

Supply, Installation, Testing and Balancing of flexible ducting comprising of inner as well as outer skin

constructed out of aluminium & fibre glass insulation 25mm thick of minimum 24 kg/cu.m density

insulation sandwitched in between. Duct should confirm to fire rating standards BS-476 part 5, 6 & 7.

Flexible Ducts of following sizes as per approved shop drawings, specifications :

Universal (Jubilee) clamp should be provided to fix the flexible duct in the spigots/Butterfly Dampers

and covered with aluminium tape. Circular clip with chain/GI threaded rod to be provided to support

MR the flexible duct.

Supply, Installation and Testing of single piece GI round spigot made out of spinning process with

11.0 50mm height and having grooves on both sides and circular flanges. Spigots shall be installed on main

ducts to facilitate connection of flexible ducts.

Supply, Installation and Testing of Butterfly damper of GI sheet construction with two flap with round

flange on one side and 10mm grove on other side for fixing of flexible duct with the help of band, 20

12.0 Gauge Frame 250mm dia & above, 22 Gauge Frame upto 200mm dia & 22 Gauge Blade in all sizes

as per the specifications and shop drawings.

Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/

13.0 round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers,

16.12.1 supports etc. as per approved drawings and specifications of following sheet thickness complete as

Diffusers & Grills

Digitally signed by AMIT

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume

14.0 16.15 control dampers as per specifications. SQM 12.0 9105.00 109260.00

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without

volume control dampers complete as required

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with

aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without

volume control dampers with anti smudge ring & removable core.

Supply, Installation, Testing of 125mm deep antivibration flexible joints at the outlet of air handling

18.0 MR units/ductable split units//inline fans. Flexible connections shall be constructed using imported fire RM 20.0 1440.00 28800.00

retardant fabric with extruded aluminium frame/flange on both sides of approved make.

Supply, Installation, Testing and Balancing of linear slot diffusers as per the approved shop drawings

and specifications. Each slot shall be 25mm wide. The diffuser face shall be a one piece extrusion so

there are no visible joints. Slot diffusers shall be complete with end caps either as end plates or end

angles or integral part, air control blades etc. Slot diffuser have a variable neck length and the diffuser

face could be optionally be fitted to the plenum box on site. Diffuser shall have provision to access

20.0 MR collar dampers for air balancing.

All Return air diffusers in false ceiling to be properly supported from real slab using chains or gripple

3 slot/2slot, powder coated extruded aluminium diffusers of approved colour & shade.

Supply, Installation and Testing of Bird Screens with GI wire mesh to be installed at the suction of

21.0 MR fresh air/discharge of Exhaust air as per the specifications and shop drawings. Sample of bird screen SQM 10.0 5500.00 55000.00

to be got approved from Engineer in charge/ Clients prior to procurement.

Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile

rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The

22.0 16.23 joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation

complete as per specifications and as required.

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass

wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre

23.0 to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet

fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc.

complete as required and as per specifications

Testing & reparing of existing AHU units ,cleaning of filters and any other works if required to make

21.0 MR AHU functional as per the requirement. no 8.0 16500.00 132000.00

Digitally signed by AMIT

SITC of Split AC of 2 Tonn of minimum 03 star rating with Timer and stand for outdoor unit , complete

21.0 MR in all respects as per the site requirement. One timer is to be installed for 02 numbers of AC. One no 12.0 48110.00 577320.00

Temperation meter for one room (one for 02 ac)

TOTAL HVAC WORKS 3714860.0 3925264.0

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - DATA and VOICE WORKS

S NO Description UOM Qty Rate DSR Amount Non-DSR Amount

DSR 2022 UTP Components for Data

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of

1 (DSR 1.53.1) Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, METRE 21980 57.00 1252860.00

Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Work

2 MR Station end. Keystone Unshielded Outlet, 180DG C6, Blue or its equivalent specifications Nos. 326 450.00 146700.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Work

Station end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow or its equivalent

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Rack

4 MR Side. Keystone Unshielded Outlet, 180DG C6, Blue or its equivalent specifications Nos. 326 450.00 146700.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Rack Side

5 MR end Redantant . Keystone Unshielded Outlet, 180DG C6, Yellow or its equivalent specifications Nos. 249 450.00 112050.00

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information

6 MR outlet (I/O) to end user device connectivity.High Speed Gigabit 24AWG U/UTP Patch Cord Blue, Nos. 326 400.00 130400.00

LSZH, C6, 2M or its equivalent specifications

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information

7 MR outlet (I/O) to end user device connectivity. (Rack end), High Speed Gigabit 26AWG Traceable Nos. 326 950.00 309700.00

Patch Cord Grey, LSZH, C6, 2M or its equivalent specifications

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information

9 MR outlet (I/O) to Rack End Redantant device connectivity.High Speed Gigabit 24AWG U/UTP Patch Nos. 249 400.00 99600.00

Cord Yellow, LSZH, C6, 2M (Yellow) or its equivalent specifications

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred Jack Panel for

10 MR CAT6 cable termination at rack end. Data Active or its equivalent specifications Nos. 14 4800.00 67200.00

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred Jack Panel for

11 MR CAT6 cable termination at rack end. Data Active Redandant or its equivalent specifications Nos. 12 4800.00 57600.00

SITC of 04 core OM4 Multimode fiber orange color 50/125, minimum bending radius 15x

12 MR OD or its equivalent specifications RM 200 229.17 45833.33

13 MR SITC of OS2 G.652.D 1-fibre, buffered, LC Duplex, LC to pigtail, 1m. or its equivalent Set 6 247.50 1485.00

14 MR specifications

SITC of 42U Rack Each 2 46,500.00 93,000.00

B. UTP Components for VOICE

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of

1 (DSR 1.53.1) Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, RM 8575 57.00 488775.00

Unshielded LSZH Cable, C6 or its equivalent specifications

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Work

2 MR Station end. Keystone Unshielded Outlet, 180DG C6, (Ivory) or its equivalent specifications Nos. 245 450.00 110250.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Rack end.

3 MR Keystone Unshielded Outlet, 180DG C6, (Ivory) or its equivalent specifications Nos. 245 450.00 110250.00

Supply , Installtion , Testing and Comissioning of 24 port Loaded Angled Staggred Jack Panel for

5 MR CAT6 cable termination at rack end. Voice Active or its equivalent specifications Nos. 12.00 4800.00 57600.00

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information

7 MR outlet (I/O) to end user device connectivity. (Rack end), High Speed Gigabit 26AWG Traceable Nos. 245.00 950.00 232750.00

Patch Cord Grey, LSZH, C6, 2M or its equivalent specifications

Supply , Installtion , Testing and Comissioning of 4 Port British Style Shuttered Face Plate white

8 MR for I/O fixing at user side or its equivalent specifications Nos. 245 275.00 67375.00

26 Digitally signed by AMIT

C. 200 Pair MDF Box

1 MR 200 Pair MDF Box with mounting Frame Nos. 2 11666.00 23332.00

2 MR 10 Pair Krone Module Nos. 20 900.00 18000.00

3 MR 25 Pair Riser Cable Mtr. 200 1253.00 250600.00

D UTP Components for Wifi

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of

1 (DSR 1.53.1) Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, RM 2400 57.00 136800.00

Unshielded LSZH Cable, C6 or its equivalent specifications

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Work

2 MR Station end. Keystone Unshielded Outlet, 180DG C6, White or its equivalent specifications Nos. 40 450.00 18000.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Rack end.

3 MR Keystone Unshielded Outlet, 180DG C6, White or its equivalent specifications Nos. 40 450.00 18000.00

Supply , Installtion , Testing and Comissioning of 24 port Unloaded Angled Staggred Jack Panel for

4 MR CAT6 cable termination at rack end. Voice Active or its equivalent specifications Nos. 2.00 4800.00 9600.00

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information

5 MR outlet (I/O) to end user device connectivity. (Field End), High Speed Gigabit 26AWG Patch Cord Nos. 40.00 400.00 16000.00

Grey, LSZH, C6, 2M or its equivalent specifications

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information

6 MR outlet (I/O) to end user device connectivity. (Rack end), High Speed Gigabit 26AWG Traceable Nos. 40.00 400.00 16000.00

Patch Cord Grey, LSZH, C6, 2M or its equivalent specifications

Supply , Installtion , Testing and Comissioning of Single Port British Style Shuttered Face Plate

7 MR white for I/O fixing at user side or its equivalent specifications Nos. 40 147.00 5880.00

E UTP Components for CCTV

Supply, Fixing & Laying of CAT 6 UTP cable 23 AWG solid copper conductors for Connectivity of

1 (DSR 1.53.1) Hub room to End Point.High Speed Gigabit Ethernet U/UTP, 250 MHz, Class E, 23 AWG, RM 1440 57.00 82080.00

Unshielded LSZH Cable, C6

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Work

2 MR Station end. Keystone Unshielded Outlet, 180DG C6, White or its equivalent specifications Nos. 24 450.00 10800.00

Supply , Installtion , Testing and Comissioning of I/O port for CAT6 cable termination at Rack end.

3 MR Keystone Unshielded Outlet, 180DG C6, White or its equivalent specifications Nos. 24 450.00 10800.00

Supply , Installtion , Testing and Comissioning of 24 port Unloaded Angled Staggred Jack Panel for

4 MR CAT6 cable termination at rack end. Voice Active or its equivalent specifications Nos. 1.00 4800.00 4800.00

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information

5 MR outlet (I/O) to end user device connectivity. (Field End), High Speed Gigabit 26AWG Patch Cord Nos. 24.00 400.00 9600.00

Grey, LSZH, C6, 2M or its equivalent specifications

Supply , Installtion , Testing and Comissioning of CAT6 patch cord 2 Mtr (7 feet) for information

6 MR outlet (I/O) to end user device connectivity. (Rack end), High Speed Gigabit 26AWG Traceable Nos. 24.00 950.00 22800.00

Patch Cord Grey, LSZH, C6, 2M or its equivalent specifications

Supply , Installtion , Testing and Comissioning of Single Port British Style Shuttered Face Plate

7 MR white for I/O fixing at user side or its equivalent specifications Nos. 24 147.00 3528.00

GRAND TOTAL (A+B+C+D+E) 1960515.00 2338283.33

GRAND TOTAL (A+B+C+D+E) 1960515.00 2338283.33

27 Digitally signed by AMIT

S No Description UOM Qty Rate Amount

A. Active Component for Data, Wifi

24-Port Layer 3 Stackable Managed Gigabit Switch, 20 x 10/100/1000BASE-T ports

With 4 x Combo 10/100/1000BASE-T/SFP ports, 4 x 10G SFP+ ports, Switch

Resource Management (SRM) for flexible management of system resources,

1 Redundant Power Supply (RPS) support, MPLS L2VPM/L3 VPN support, Full L3 Nos. 1 166830.00 166830.00

routing protocol support including OSPF, BGP, and ISIS for IPv4/IPv6. As Approved by

NSL Incharge.or its equivalent specifications

Supply instllation testing and commissioning of Access Switch of 48 x 1G POE+, 4 x

SFP+ , 370W PoE, Switching Capacity of switch is of 176 Gbps having Forwarding

performance (64-byte packet size): 130 Mpps, Secure Shell (SSH), RADIUS, TACACS

2 + DRAM 2GB , Flash 2GB , 10K IPv4 Routes ,1K multicast Routes ,16K MAC address Nos. 3 117424.20 352272.60

, 16K flow entries L3 Protcols like OSPF , PBR, MACsec, PIM , QOS from day-1 , As

Approved by NSL Incharge.or its equivalent specifications

SITC of 48 port 10/100/1000 Base T Switch with 4 x 10G SFP+ ports,The Switch

should have 16K MAC address, Should have RJ-45 console port should support

MSTP and DUAL configuration, Should support Static Route Entry: IPv4 124; IPv6 50

, Should support IP-MAC- Port Binding strictly management network devices

preventing illegal access and the Man-in- the-middle attack, Should support

3 Asymmetric VLAN, Auto Voice VLAN, Should support Cable diagnostics, Time-based Nos. 10 104897.40 1048974.00

PoE: PoE ports can be turned on/off by port or system through schedule,

Operating Temperature -5 to 50°C (23 to 122°F). As Approved by NSL Incharge.or its

equivalent specifications

Supply, Installation, Testing & Commissioning of SFP Modules 10G.or its equivalent

Wi-Fi standard, IEEE’s new 802.11ac Wave 2 specification, and meets the growing

requirements of wireless networks by delivering a better user experience. The 1830

Series extends support to a new generation of Wi-Fi clients, such as smartphones,

5 tablets, and high-performance laptops that have integrated 802.11ac Wave 1 or Wave Nos. 40 15310.00 612400.00

2 support.or its equivalent specifications

28 Digitally signed by AMIT

Supplying, installation, testing and commissioning of WLC should support 50 access

points from Day 1 and scalable for upto 4000 AP's without Software/hardware change.

Proposed WLC should be On-Prem/cloud based, and should be hosted in

India.Controller shall support minimum 20000 concurrent sessions from a single

account.WLC should provide Guest management system with Voucher based

5A authentication, local SMS server integration for OTP, Google and Facebook Nos. 1 112280.00 112280.00

authentication. Should support major SMS gateway provider. Same controller should

manage & configure Wireless AP & Network Switch through single dashboard. or its

equivalent specifications

Providing and laying of LC- LC multimode OFC type patch cord for data and voice.or

6 its equivalent specifications Nos. 22 3850.00 84700.00

Supply, Installation, Testing and comissioning of Router. Router should be a modular

aggregation platform. It should support broad band aggregation for voice, video,

data, and mobility services with QoS scaling to a large number of

queues per device. Router should have 4 nos. of 10/100/1000 Base-T ports and 4 nos.

SFP based ports. Router should have at least 1 open slots for additional LAN/

WAN modules other then asked ports. Router should have 4x10 Gigabit SFP+ ports

from day 1. Router should have minimum 4 GB RAM from day 1. Router should have

DES, 3DES and AES Standards through dedicated encryption module/processor.

Should support IPSec with IKEv2 and Suite-B Encryption. Router shall have hot

7 swappable 1 internal power supply. Router should have a minimum performance of Each 1 2,37,188.00 237188.00

10 Mpps and 10 Gbps of bandwidth, Scalable to 10 Gbs in future. Router

should support static Routes, OSPFv2, OSPFv3, BGP4, MBGP, BFD, Policy

based routing, IPv4 and IPv6 tunneling, MPLS LDP, MPLS L3VPN, MPLS L2VPN ,

MPLS TE, FRR Link & Node Protection, LDP, MPLS Static label, MPLS VRF-

aware static labels, LDP - / Router‘s Operating System should be tested

and certified for EAL 4 or above under Common Criteria Certification or its

equivalent specifications

29 Digitally signed by AMIT

Supply, Installation, Testing and comissioning of Firewall solution should be Hardware

based, Reliable, purpose-built security appliance with hardened operating system that

eliminates the security risks associated with general-purpose operating systems. It

Should support 1:1 high availability. It Should have minimum 4 x 10G supporting SFP+

interfaces & 4 x 100/1000/10 BaseT RJ45 ports to cater to connectivity from multiple

service providers and load balance them. The Firewall should have ultra-low latency .

The IPSEC VPN should deliver at least 10 Gbps throughput to ensure connectivity with

Multiple colleges / University catering to Data / Voice traffic over IPSEC tunnel. The

Firewall should be able to handle very high concurrent sessions like 20 Million or above

and at least 200,000 of new sessions per second. The solution should support

Virtualization with 10 Virtual contexts scalable to 150 to help use the logical Firewalls

for internal / student projects run isolated with each other. The proposed solution

should have integrated IPS module with at least 10Gbps of throughput for deep pack

inspection of traffic and also should be able to inspect encrypted SSL traffic. The

8 solution should have at least 5 Gbps of Threat Protection throughput and the so that Each 1 6,60,317.00 660317.00

the entire traffic is scanned before reaching the end user. The antivirus engine should

be able to inspect the encrypted traffic like HTTPS, SMTPS, POP3s , IMAPs, FTPs etc.

The proposed system should have integrated Web Content Filtering solution which can

be used to block any unwanted sites / category of sites to adhere to University IT

guidelines. The Firewall & IPSEC VPN module shall belong to product family which

minimally attain Internet Computer Security Association (ICSA) Certification or

equivalent. The proposed system should have modules/Licenses for integrated Web

Content Filtering along with IPS, Application Control, Antivirus / Malware Protection &

Anti spam. Proposed solution should be an Appliance/Virtual Machine based solution.

In case of Virtual Machine based.or its equivalent specifications

Total : A - Active Component for Data, Wifi 3729233.60

30 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - CCTV

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR/ MR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation, Testing & Commissioning of 2MP IR IP H.265 Vandal

Proof Dome camera with 1/2.7” CMOS Motorized vari-focal, Smart IR, up to

1 MR 20m; Smart IR, IR On/Off Control Auto/Manual, or its equivalent Nos 24 4190.00 100560.00

Supply, Installation, Testing and Commissioning of 32Ch Embedded

Network Video Recorder with2-channel VGA, 2-channel HDMI video output,

AI disabled: 384 Mbps incoming, 384 Mbps recording and 384 Mbps

outgoing AI enabled: 200 Mbps incoming, 200 Mbps recording and 200

Mbps outgoing, Smart H.265+; H.265; Smart H.264+; H.264; MJPEG,

HTTP; HTTPS; TCP/IP; IPv4/IPv6; RTSP; UDP; SNMP; NTP; DHCP; DNS;

SMTP; UPnP; IP Filter; PPPoE; FTP; DDNS; Alarm Server; IP Search

Multicast; P2P; Auto Registration, ONVIF or its equivalent specifications

SITC of SSD Hard Disk Drive 8TB, 24/7 surveillance category Only

3 MR complete etc as required.etc.all complete. or its equivalent specifications Nos 4 19520.00 78080.00

SITC of 55" Professional Ultra HD Display Panel, 4K UHD (3840x2160)

Resolution, Brightness 400 Nits, Dynamic Contrast Ratio: 500000:1,

Viewing angle (horizontal / vertical): 178 / 178 degree, Display Colours:

1.07 Billion, Panel technology: IPS / Direct LED, Contrast ratio (typical)

4 MR 1200:1, Connectivity: Video Input: 2 HDMI 2.0, 2 USB 2.0, DVI-I, Audio In, Nos 1 60730.00 60730.00

Audio Out, COntrol: RS232, Ethernet, 2x10W Built-in speakers, BIS

Certified etc all complete or its equivalent specifications

5 MR SITC of HDMI cables 10 meters M2M etc all compelte. or its equivalent Nos 2 8968.00 17936.00

Total : A - CCTV 314959.00

31 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of intelligent analog addressable

1 17.2.4 photothermal detector complete with mounting base complete as required. No 320 2858.00 914560.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS

Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of intelligent addressable thermal detector

with rate of rise cum fixed tempreature thermistor complete with base as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as

Supplying, installation, testing & commisssioning of intelligent addressable programmable

5 17.2.6 sounder complete as required. No 8 2651.00 21208.00

Supplying, installation, testing & commissioning of addressable fire control module complete

Supplying, installation, testing & commissioning of addressable phone control module

7 17.2.11 complete as required. No 2 3267.00 6534.00

Supplying, installation, testing & commissioning of addressable manual call point complete as

Supplying, installation, testing & commissioning of 6 zone, voice alarm controller with USB,

11 17.3.1 MP3 player (including 6 zone button paging station) with seamless integration facility with No 1 126411.00 126411.00

main fire alarm panel for voice evacuation complete as required

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as

Supplying, installation, testing & commissioning of digital audio amplifier 500 Watt, 25V rms

13 MR operating at 240 Volt AC Supply complete as required. NOS 2 75000.00 150000.00

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

14 17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath Mtr. 3200 173.00 553600.00

complete as required

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

17.5.3 existing surface / recessed steel conduit of following pairs, cores and size including

15 connections and interconnections etc. as required.

17.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm Mtr 1440 89.00 128160.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries

16 17.5.4 and accessories like coupler etc. as required. Metre 1152 53.00 61056.00

Supplying & Fixing of battery operated illiminated "EXIT" signage, with 2hrs power Battery

backup complete as required.

Supplying, installation, testing & commissioning of Voice command keypad 6 zone, with

19 17.3.9 microphone assembly complete as required. NOS 1 81756.00 81756.00

Supply, Installation, Testing and Commisioning of Loop Card capacity of 159 detectors For

BMS Fire integration compatible with existing system

Supply, Installation, Testing and Commisioning of Interface Card for BMS fire integration

compatible with exisiting system

Digitally signed by AMIT

17.2.1 Supplying, installation, testing and commissioning of micro processor based intelligent

addressable main fire alarm panel, central processing unit with the following loop modules

and capable of supporting not less than 240 devices (including detectors) and minimum 120

detectors per loop and loop length up to 2 km, network communication card, minimum 320

character graphics/ LCD display with touch screen or other keypad and minimum 4000 events

history log in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 48

6 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger. The panel

shall have facility to connect printer to printout log and facility to have seamless integration

with analog/digital voice evacuation system (which is part of the schedule of work under SH:

PA System) and shall be complete with all accessories . The panel shall be compatible for

IBMS system with open protocol BACnet/ Modbus over IP complete as per

17.2.1.2 Two loop panel Each 1 239225 239225

17.2.3 Supplying, installation, testing & commissioning of repeater panel wih 320 character/ Touch

screen LCD display with inbuilt reset, acknowledge and silence switches complete as

required. Each 1 108688 108688

TOTAL FIRE ALARM WORKS 2549828.00 188700.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - IPPBX

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT

Supply, Installation, Testing & Commissioning of Server based Communication

System with all the required Software licenses and Hardware - IP-PBX/IP

Telephony Communications Server: The IP Telephony Solution shall support the

following Services - Voice, Video, IM, Presence and Audio Conference The

Solution should be built on Redundant Servers The IP Telephony Solution should

support H.323 and SIP The Solution should support the following Trunks - FXO, E1

PRI and SIP The IP Telephony solution should incorporate all licenses for the

1 Phones and Trunks Solution should support all Extensions from Day 1 with future Nos 1 1409304.00 14,09,304.00

scalabilityupto 500 users. Licenses for all Phones supplied should be provisioned

on Day1 Solution should support Hard 100 IP Phones, Softphones, Video Phones,

400 Analog Extensions with necessary Licenses, Rack mount architecture,

complete as required and as per technical specifications.or its equivalent

Supply, Installation,Testing and commisioning of Executive Level IP Phone with

Color display – 3.7 inches x 2.1 inches (9.5 cm x 5.4 cm)- Diagonal width: 4.3

inches (11 cm), Touch Screen display, 4-position adjustable tilt display,

Permanently-labeled feature buttons:, speaker, mute, headset, contacts, home,

history, message, phone, forwarding, volume (separate volume levels in handset,

speaker, ringer, and headset), Red LEDs on speaker, mute, headset, message and

history, 24 administrative buttons, Wideband speakerphone 0-5 Softkeys,

Ergonomic hearing aid compatible, handset supporting TTD acoustic coupler,

Bluetooth and DECT headset support with adapter, Message waiting indicator,

2 Ethernet (10/100/1000) line interface, Secondary Ethernet (10/100/1000)line Nos 8 21780.00 1,74,240.00

interface, Optional IEEE PoE 802.3af adapter registers as class 2 device, SIP

protocol, H.323 protocol support, Standards-based codec support: G.711, G.726,

G.729A/B, G722 , Supports the following languages: Arabic, Brazilian Portuguese,

Simplified, Chinese, Dutch, English, Canadian,French, Parisian French,

German,Hebrew, Italian, Japanese (Kanji,Hiragana and Katakana), Korean, Latin

American Spanish, Castilian Spanish, and Russian. Includ Licence. or its

equivalent specifications

34 Digitally signed by AMIT

2.8” (diagonal) color display—320 x 240 pixels, Multiple line phone with four red /

green line / feature indicators around display, 4 Context sensitive soft keys, Hard

buttons for phone, messages, contacts, history, home, navigation cluster, headset,

speaker, volume, mute, LEDs for speaker, mute, headset, essage, history,

Wideband audio in handset and wired headset, Full duplex speakerphone &

handset, Ergonomic hearing aid compatible handset supports TTD acoustic

coupler, Message waiting indicator, Mute key with optional mute alerting, IC call

alerting with 360-degree visibility, Dual-position stand, optional wall-mount stand,

Gigabit Ethernet (10 / 100 / 1000) line interface, Second Ethernet interface 10 / 100

/ 1000 Mbps, PoE Class (IEEE 802.3af) registers as class 1 device and supports

3 802.3az, Optional AC to 5 volt power supply • SIP protocol support, Standards- Nos 18 12043.00 2,16,774.00

based codec support: G.722, Opus, Configurable via Web interface, Support for

HTTPS, TLS and SRTP for encryption, Recent Call Log (100 entries), Zero touch

deployment via Device Enrollment Services Support, Supports the following

languages: Dutch, English (UK & US), French, (Canada), French (France),

German, Italian, Japanese, Portuguese (Brazil), Simplified Chinese, Spanish (Latin

America), Spanish (Spain),Traditional Chinese, Includ Licence.or its equivalent

Supply Installation, Testing and Commissioning of Analog Speaker Phone with

backlight. or its equivalent specifications

Total 21,22,905

35 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: ACCESS CONTROL

S NO DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

S NO DSR DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Supply, Installation,Testing and commisioning of Biometric and RFID

1 MR based Access terminal, RFID Supported Complete as Required. or its Nos 20 14,015.00 2,80,300.00

equivalent specifications

Supply Installation Testing & Commissioning of Access Control Software including

Time Attendance Multi Reader and controller confuguration and upgradable to

Enterprise level with unliimited users. Databse Supports: MS SQL, Oracle, and MS

Access database types. Type of technology supports: IRIS Sacnner, Biometric, Face,

RFID , etc supports template management , Highly secured communication with

server,Allows for real- time monitoring of system status and user activities with

optional audio alerts. tamper detection, network communication loss, and many other

system attributes. or its equivalent specifications

SITC of Access IP Master Controller with Enclosure & Power Supply- 1 door

Universal 2 Reader TCP/IP Controller Expandable upto 4 Reader with exit reader

module,4 Programmable inputs & 4 outputs 100 mA MAX ),Temperature: 0 to 70°C

(35 -150°F); Humidity: 20 to 80% RH (non-condensing) , 3000 USERS & 3000

transactions,2 Reader.or its equivalent specifications

Supply, Installation, Testing & Commissioning of 12V, 5 Amp. SMPS with MS Box

4 MR Certified. or its equivalent specifications Nos 10 1,198.00 11,980.00

Supply, Installation, Testing & Commissioning of Smart card Frequency Excitation

(13.56 MHz) Mifare/I- class technology smart Card. Memory Type

5 MR EEPROM,Complies with ISO/IEC standards for thickness. . or its equivalent Nos 250 153.00 38,250.00

Supply Installation Testing and Commissioning of double leaf/ single leaf 600 LBS

6 MR Door Electro Magnetic Lock with complete compatiable Bracket UL Listed. or its Nos 20 4,378.00 87,560.00

equivalent specifications

Supply Installation Testing and Commissioning Touchless Request to Exit button with

7 MR detection range from 4 to 12 cm.or its equivalent specifications Nos 20 912.00 18,240.00

Supply Installation Testing and Commissioning Fire Exit panic Bar single/double Door

8 MR with EM lock and required accessories all included or its equivalent specifications Nos 20 14,624.00 2,92,480.00

Supply Installation Testing and Commissioning Emergency Door Release Button,

9 MR Gree, Key Resettable, DoublePole Double Throw.or its equivalent specifications Nos 20 659.00 13,180.00

Supply Installation Testing and Commissioning of 8 Core-conductor20 to 22 AWG. or

its equivalent specifications

Total in INR 0.00 12,85,055.00

36 Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR 2022/ DESCRIPTION UNIT QTY RATE TOTAL TOTAL

MR AMOUNT AMOUNT

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class heavy duty

MS pipe conforming to IS 3589/IS 1239 including Welding, fittings

like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing

18.7 the pipe on the wall/ceiling with suitable clamp/support frame and

1 painting with two or more coats of synthetic enamel paint of

required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia quartzoid

18.21 bulb type sprinklers of rating 68 degree centigrade with required

2 accessories :

Supplying, installation, testing & commissioning of sprinkler flexible

pipe (UL Listed) of stainless steel complete with 15 NPT on

reducer thread with maximum working pressure of 175 PSI test

3 18.25 pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT

male thread to sprinkler head (Outlet) 15mm NPT female thread

with reducer, nipple, 2 side brackets, center bracket, stockbar of

following sizes complete as required.

Providing and fixing ISI Marked of approved make Fire

4 Extinguishers complete with all accessories as per manufacturer's

specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). NOS 10 9876.00 98760.00

b) Mechanical Foam gas cartridge type. 9 Kg capacity (IS:15683). NOS 10 2931.53 29315.25

c) ABC dry powder stored pressure type 6 kg capacity (IS:15683). NOS 10 4746.13 47461.25

Digitally signed by AMIT

SCHEDULE OF QUANTITIES-ART WORKS

S NO MR DESCRIPTION UNIT QUANTITY RATE

DSR (INR) NON DSR (INR)

Mixed media mural Wood/metal/fiberglass/terracotta /tiles or

1 MR anything other medium artist find suitable as long as it is sq m 10 6000.00 60000.00

permanent in nature.

Providing and fixing theme artwork/Canvas any other as per

direction and site requirement from the local artisans as per the

2 MR selection of the client and the architect.

Panels of various sizes sqm 20 3000.00 60000.00

TOTAL ART WORKS 0.00 120000.00

38 Digitally signed by AMIT

Schedule of Quantities: Signages

S No Description Unit Qty Unit price Non-DSR Amount

1 RECEPTION 3D ACRYLIC SIGNAGE

Providing, fabricating and fixing of 3D Acrylic Letters raised 1.5 inches of

required size and shape with arrangement of screws in the letters itself for

mounting on the walls or pasting using VHP Tape. Fixing complete as per

directions of the engineer. The Sizes would be calculated in Sqft as per Logo Each 2 25,624.00 51248.00

Design provided.

Tentative Size 42"X60"

2 NAME SIGNAGE CHANGEABLE (All Floors)

Providing and fixing of Acrylic signage made of 3mm Acrylic with textured wood

finish pasted /White milky acrylic 3mm laser cut pasted on top with proper

names/ Departments written using plottercut vinyl or laser cut acrylic letters in

approved colour.Inserting provision for changing names .Fixing provision using Each 50 1,281.00 64050.00

VHP double sided tape as required.

Signage Size 12x5 inch

3 DEPARTMENTAL SIGNAGE (All Floors)

Providing and fixing of Acrylic signage made of 5mm Acrylic with textured wood

finish pasted /White milky acrylic 3mm laser cut pasted on top with proper

names /Departments written using plottercut vinyl or laser cut acrylic letters in Each 10 1,025.00 10250.00

approved colour. Fixing provision using VHP double sided tape as required.

Signage Size 12x5 inch

4 FLOOR DIRECTORY

Providing and fixing of Acrylic signageboard of 5mm Acrylic with textured wood

finish pasted /White milky acrylic 3mm laser cut pasted on top with proper

names /Departments written using plottercut vinyl or laser cut acrylic letters in

approved colour. Provision of fixing screws/ Studs etc or as per the direction of Each 2 16,655.00 33310.00

5 TOILET ICONS

Providing and fixing of Acrylic signage made of 5mm Acrylic with textured wood

finish pasted /White milky acrylic 3mm laser cut pasted on top with proper icons

using plottercut vinyl or laser cut acrylic letter in approved colour. Fixing

provision using VHP double sided tape as required.

Signage Size :8 "x 8" inch

6 FIRE EVACUATION MAP / SIGN.

39 Digitally signed by AMIT

Providing and fixing of Clear Acrylic sandwich frame of 3mm & 2mm acrylic with

Evacuation Plan Printed on photoluminescent media and inserted between the

two frames. Should be fixed on the wall using 4 Screw/ SS studs. Size 12 inch x Each 4 1,922.00 7688.00

7 FIRE ESCAPE EDGE-LIT SIGNAGE

Providing and fixing of Edge-Lit signage with battery backup. Made from acrylic

sheet of 8 mm thickness laser engraved, Transformer to be inbuilt.

Maintenance - free sealed nickel cadmium battery included • 120V/277V AC

Operation • Crystal clear acrylic face panel• Engraved letters increase visibility •

Anodized aluminum faceplate • Field applied chevron directional indicators Each 4 2,819.00 11276.00

simplify installation • Long life, energy-saving LED lamps • Dual-voltage

120V/277V AC Operation • UL listed. To be installed at stairs entry. Size 310mm

8 FIRE SAFETY SIGNAGE

Providing fabricating and fixing of signage 05 mm thick Acrylic / Sun board sheet

at base with photoluminescent film self adhesive & colored vinyl ( Red/Green)

Plotter cut and pasted on top. Both side / Single Side facing Complete including

fixing on wall with screws and washers or hanging on ceiling with GI chain/GI

Bar complete as per technical specifications and directions of Engineer.

a Photoluminescent, Fire Hose Reel - 10"x8" Each 4 384.00 1536.00

b Photoluminescent, Fire Exit / Escape Sign - 18"x6" Each 4 384.00 1536.00

c Photoluminescent, Floor Level - 18"x6" Each 4 384.00 1536.00

d Photoluminescent, Fire Alarm Call Point - 10"x8" Each 4 384.00 1536.00

e Photoluminescent, Fire do not use lift- 10"x8" Each 4 384.00 1536.00

f Photoluminescent Signs, Fire Extinguishers - 10"x8" Each 8 384.00 3072.00

TOTAL 204974.00

40 Digitally signed by AMIT