Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.4 LAccepted-Finance NOT AVAILABLE | FARIDABAD | HARYANA | 121004 | L1 | Accepted-Finance Lowest one | |
| 2 | L2₹32.9 L+₹46,589.38 (1.44%)Rejected-Finance GE W COLABA MUMBAI | CHANDRAPUR | MAHARASHTRA | 441205 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹33.7 L+₹1.3 L (4.02%)Rejected-Finance FLAT NO A 102 ASHOKVAN RAJSHIV CO OP HSG SOC SHIV VALLABH ROAD DAHISAR EAST MUMBAI 400 068 | MUMBAI SUBURBAN | MAHARASHTRA | 400068 | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹35.2 L+₹2.8 L (8.68%)Rejected-Finance NOT AVAILABLE | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹36.9 L+₹4.5 L (13.8%)Rejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L5 | Rejected-Finance Other than lowest |
Tender Value
Refer Docs
EMD Value
₹93,160
Closing Date
1 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NW NOFRA
DR HOMI BHABHA ROAD NEW NAVY NAGAR COLABA MUMBAI
PROVISION OF TILLING IN CERTAINS DUS OF BLDGS AT OUTLAYING AREAS OF NOFRA AND PROVISION PARTITION WALL AT WARDROOM PANTRY BLDG P44 AND PROVN OF SLIDING GLASS WINDOWS AT NEW OTM BLDG AT INS SHIKRA UNDER GE NW NOFRA COLABA MUMBAI
2022_MES_537841_1
8064
Open Tender
Miscellaneous Works
Item Rate
240 days
Mumbai
Please refer tender documents
8 documents required · 8 mandatory
₹500
GE NW NOFRA
₹93,160
Yes
18 Aug 2022
14 Jul 2022
6 Aug 2022
14 Jul 2022
1 Aug 2022
27 Jul 2022
14 Jul 2022 - 26 Jul 2022
60 days
Amount
Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing and removing rubbish off the premises (outside MD land) complete all as specified and directed.
(i) From Ground floor to 4th floor
(ii) From 5th floor to 8th floor
(iii) From 9th floor to 12th floor
(iv) From 13th floor to 15th floor
M&L for light shade coloured Double Charged vitrified ceramic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointing in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6, complete all as specified and directed.
(i) From Ground floor to 4th floor
(ii) From 5th floor to 8th floor
(iii) From 9th floor to 12th floor
(iv) From 13th floor to 15th floor
M&L for light shade coloured Double Charged vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm as in skirting etc set and jointed in neat cement slurry and pointing in white or coloured cement to match incl 10mm thick backing coat in CM 1:4, complete all as specified and directed.
(i) From Ground floor to 4th floor
(ii) From 5th floor to 8th floor
(iii) From 9th floor to 12th floor
(iv) From 13th floor to 15th floor
Taking down shutters of any description exc 1 sqm and not exc 2sqm each and refixing in the same opening after easing and adjusting.
(i) From Ground floor to 4th floor
(ii) From 5th floor to 8th floor
(iii) From 9th floor to 12th floor
(iv) From 13th floor to 15th floor
S&F 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring complete all as specified and directed.
(i) From Ground floor to 4th floor
(ii) From 5th floor to 8th floor
(iii) From 9th floor to 12th floor
(iv) From 13th floor to 15th floor
Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, complete all as specified.
(i) From Ground floor to 4th floor
(ii) From 5th floor to 8th floor
(iii) From 9th floor to 12th floor
(iv) From 13th floor to 15th floor
Rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces in patches, surfaces to be finished even and smooth without using extra cement, complete all as specified.
(i) From Ground floor to 4th floor
(ii) From 5th floor to 8th floor
(iii) From 9th floor to 12th floor
(iv) From 13th floor to 15th floor
M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat primer on 1 to 2 mm thick wall care putty (JK/Birla) all as specified and directed.
(i) From Ground floor to 4th floor
(ii) From 5th floor to 8th floor
(iii) From 9th floor to 12th floor
(iv) From 13th floor to 15th floor
M&L for preparation of old plastered surface of wall and applying one coats of oil emuslion distemper, all as specified and directed.
(i) From Ground floor to 4th floor
(ii) From 5th floor to 8th floor
(iii) From 9th floor to 12th floor
(iv) From 13th floor to 16th floor
Dismantling boarding, any description, fixed in any position with nails, complete all as specified.
Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing, complete all as specified.
Taking down of chowkhats or frames without taking off shutters from the frame not exc 1.5 Sqm each, complete all as specified.
M&L for Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required ( Superficial area exc 400 sqcm but n.exc .1 sqm), complete all as specified.
M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6, complete all as specified.
M&L Cutting out bricks, forming toothing for, and bonding new into old work including value of new materials entering old walls and jointing and pointing (measured on vertical face in contact with old wall only) in cement mortar 1:6, complete all as specified.
M&L for coloured glazed ceramic tiles as in vertical surface350 x 250 x 7mm / 450 x 350x7mm thick as in dado/skirting or on vertical surface, over and including 15mm thick backing coat in CM 1:4,set and jointed in neat cement slurry and pointed in white or colour cement match to existing complete all as specified and directed.
S&F 12mm thick toughned glass as in hinged doors, partitions automatic doors and similar work incluidng cutting to shape , drilling holes required, complete all as specified.
Material & Labour for rendering 15mm thick CM 1:6 on fair face of brick work or concrete surfaces of walls and finised surfaces even and smooth without using extra cement complete all as specified and directed.
Material & Labour rendering 10 mm thick cement plastering on ceiling surfaces in CM (1:3) finished even and smooth without using extra cement all as specified and directed, as in ceiling.
Material & Labour for rendering 15mm thick CM 1:4 on fair face of brick work or concrete surfaces of walls and finised surfaces even and smooth without using extra cement , complete all as specified and directed.
M&L Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) all as specified.
Material & Labour preparation of new plastered or unplastered surfaces of ceiling including scrapping and applying two coats of distemper oil emulsion over a coat of primer on 1-2mm thick wall care putty finish evenly strictly as per manufactuure instruction with smooth roller finish complete all as specified and directed.
Material & Labour preparation of old plastered or unplastered surfaces of walls including scrapping and applying two coats of distemper oil emulsion over a coat of primer on 1-2mm thick wall care putty as per manufactuure instruction with smooth roller finish complete all as specified and directed.
Material & Labour preparation of old plastered or unplastered surfaces of ceiling and applying two coats of distemper oil emulsion as per manufactuure instruction with smooth roller finish complete all as specified and directed.
S&F in repairs fancy type bib taps, chromium plated cast copper alloy 15mm bore with crutch handle, screwed down, & fixed complete all as specified and as directed.
S&F in repairs stop valves/angle valve fancy type chromium plasted with long shank and cup (concealed type) 15 mm bore dia , screwed both ends, complete all as specified and as directed.
M&L for machine cut cudappa stone slab 40 mm thick fixed in walls by cutting groves and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as directed.
M&L 16 to 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over and including 10 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding all as directed.
M&L Granite (of any type) 18-20mm thick machine cut over 15mm thick screed bed in CM (1:6), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete
S&F 15mm bore steel water tubes, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors, complete all as specified.
S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or includingfixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified.
S&F PVC (SWR) bends 75mm bore, complete all as specified.
S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified.
S&F 75mm bore PVC (SWR) pipes double socketed , in any length with rubber ring joints, laid in in floors, complete all as specified.
S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all as specified and as directed.
S&F 4.8mm thick frosted one side,Sheet glass, ordinary quality and glazing with beads in square n exc 0.5sq. m in each pane
M&L French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with one or more coats, complete.
M & L for Point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated sheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic casing and caping of size not less than 25mm width, I ISI marked with accessories concealed in wall/ceiling/truss including cutting chases, pinning in etc with PVC non metallic ISI marked terminal boxes concealed wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for the following :- Make of cable: Plaza/ Havelles/Finolex. Make of PVC conduit : Finolex/ Precision/ Plaza
(a) One light point controlled by one switch SP one way.
(b) One ceiling fan point controlled with one 5A switch
(c) One exhaust fan point controlled with one 5A switch
S&F Modular Switch , 6Amp, One way, 1 module, ISI marked Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
S&F Modular Socket , 16Amps, 6 pin combined 3 module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
S&F ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified and directed. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (NIXON).
S&F Modular white cover plate with Frame 6 Module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
S&F Modular metal flush box 6 module, ISI marked. Make : Legrand (Arteor)/Havells (Coral)/Gold Medal Electrical Pvt Ltd (WEGA)
Supply and fixing exhaust fan , steel body AC single phase, 230 volt of size 225 mm sweep 1400 RPM with blades, and frame and louvers complere fixing arrangements on kthe wall with nuts and bolts making the good surfces all as specifed and directed at site Make Havells /Usha /Orient Note:- (a) Taking down U/S Ext Fan of any capacity will be deposited in MES store yard
SN CONSTRUCTION
BOB ENTERPRISES
SHREE JAGDISH FURNITURE CO.
Nilesh Construction
HINDUSTAN BUILDERS
Unitech Enterprises
MSK Everlast Enterprises
Laxmi Sales
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .