Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹78.4 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹89.1 L+₹8.6 L (10.7%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹1.0 Cr+₹20.8 L (25.8%)Rejected-Finance 1 225 5 6 SADAR BAZAR DELHI CANTT 110010 | DELHI CANTT | NEW DELHI | DELHI | 110010 | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹1.1 Cr+₹24.8 L (30.9%)Rejected-Finance Q 83 SOUTH CITY I GURGAON 122002 | GURGAON | GURGAON | HARYANA | 122002 | L4 | Rejected-Finance Being L4 | |
| 5 | Rejected-Technical H NO 90 VILLAGE REWLA KHANPUR PO NAJAFGARH NEW DELHI 110043 | NEW DELHI | WEST DELHI | DELHI | 110043 | - | Rejected-Technical Rejected due to two class below the requisite class as per NIT. |
Tender Value
₹1.1 Cr
EMD Value
₹1.8 L
Closing Date
28 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Col Jigar Trivedi, SM
HQ CWE (AF) Gurgaon, Old Palam Road, Delhi Cantt-10
ADDN/ALTN/IMPROVEMENT TO CERTAIN MAP QTRS BLOCK P-218 AND P-220 AT AF STN ARJANGARH UNDER GE (AF) GURGAON
2023_MES_603185_1
CWE/GGN/GT-03/2023-24
Open Tender
Civil Works
Works
330 days
AF Stn Arjangarh
As per NIT
8 documents required · 8 mandatory
₹1,000
GE AF Gurgaon
₹1.8 L
Yes
15 Sept 2023
14 Jun 2023
4 Aug 2023
14 Jun 2023
28 Jul 2023
14 Jul 2023
14 Jun 2023 - 13 Jul 2023
Taking down cement or cement lime plaster on stone/brick wall, ceiling incl raking out joints, hacking for key, scrubbing down with water etc, including removal of rubbish outside MoD land and necessary scafolding complete all as specified and directed.
M&L Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:4) finished fair and even and using WPC, complete all as specified and directed. (Note : WPC shall be measured and paid separately.
M&L Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement,complete all as specified and directed.
M&L Rendering 10 mm thick in cement mortar (1:3), as on concrete surfaces (such as top & sides of chajjas, beams, balcony ceiling etc.) finished even and smooth without using extra cement, complete all as specified.
Taking down chowkats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and all as specified and directed.
Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm all as specified and directed.
S & F pressed steel door frames with one or more rebates including necessary fixing lugs hinges lock strike plate etc complete all as specified size of frame 105 x 60mm complete all as specified and directed.
Complete all as per Srl item No 08 above but 125 x 60 mm complete all as specified and directed.
S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.20 (a) ; supplied and fitted to chowkats complete all as specified and directed.
S & F flush shutter 40 mm thick solid core construction with block board core and plywood face panels commercial type on both sides with lipping / frame to match complete all as specified and directed.
M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded coloured PVC ’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of single side prelaminated PVC sheet to be fitted in the MS frame welded/ sealed into the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification complete all as specified and as directed.
Complete all as per item no. 12 above but wire gauzed i.e. panel will be of wire gauze in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly complete all as specified and directed.
S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet & reinforced with MS square tube and fixing in opening as specification & drawing, complete all as specified and directed.
S&F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.
S & F mild steel tower bolts, stove enamelled black, with bright bolt and fixed, length of bolt 200mm long complete all as specified and directed.
S & F mild steel sliding door, bolts, plate type, stove enamelled black with bright bolt not less than 12mm bore, length of bolt 250mm complete all as specified and directed.
S&F 300mm Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S & F aluminium handle cast type anodised, 125 mm long complete all as specified and directed.
S & F aluminium, anodised, barrel tower bolt of extruded section, ISI marked, 150mm long complete all as specified and directed.
S & F Mild Steel butt hinges, medium weight 100mm size complete all as specified and directed.
M&L Cement concrete 1:3:6 type C-1 filling of pressed steel frame and hold fast blocks etc complete all as specified and directed.
Cutting hole in brick wall built in cement mortar exceeding half brick but not exceeding one brick and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 complete all as specified and directed.
S & F mild steel work for hold fasts,wall ties, ,bands, straps clamps, handles for manhole covers etc confirming to Fe - 290 grade- E165 all as specified and directed.
M&L for factory made steel window with pintol hinges & 2 Nos100 mm mild steel tower bolts to each shutter, steel handle and without glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.
M&L for factory made box type steel window with pintol hinges & 2 Nos 100mm mild steel tower bolts to each shutter, steel handle and with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.
M&L for factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and directed.
S&F framed work such as grills, grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars barred iron doors, ladders, framed balusters, walkways, railing, frame work of water tanks, grills to balconies fixed to RCC/ brick walls and similar work complete all as specified and as directed by the Engineer-in-Charge.
M&L Mild steel framed work Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, complete all as specified.
S&F mild steel plain black sheet 0.80 mm thick as in hearths,covering to door shutters , covering to door chowkat etc cut to size edges beaded if directed, holes punched, etc complete all specified and as directed.
Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises complete all as specified and as directed.
M&L, Non-skid ceramic coloured tiles, joint free tiles 7 to 8 mm thick (square/rectangular) of size 300 x 300 mm , in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement over 15mm thick screed bed in CM (1:6) complete all as specified and directed.
M&L First quality, Non skid ceramic coloured, joint free tiles 8 to 10 mm thick (square or rectangular) of size 600 x 600 mm, laid in floors set and jointed with neat cement slurry @ 3.00 kg/Square Metre over and including 15 mm thick screed bed of cement mortar (1:6) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed.
M&L First quality, Non skid ceramic coloured, joint free tiles 8 to 10 mm thick (square or rectangular) of size 600 x 600 mm, on vertical surface set and over including 10 mm thick rendering with cement mortar (1:4) including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed.
M & L first quality coloured glazed ceramic, joint free tiles fixed in pattern of different colour including border of size 300x450x7 mm thick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. Note :- Pattern of the tiles will be decided by GE at the time of execution.
Dismantling/removing old damaged worn out APP of any thickness incl screed bed or plastering of any thickness and removing the rubish materials outside MOD land at a dumping place earmarked marked by any state govt/municipalities etc any distance complete.
M&L Plain cement concrete (1:2:4) type B-1, using 20 mm graded mechanically crushed stone aggregates as in padding to roof to maintain the required slope and finished the surface even and smooth without using extra cement, complete all as specified and directed.
Material and labour 15 mm thick screed bed in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 150 ml by per bag of cement on concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.
Supply only Integral water proofing compound
Cutting groove in brick wall 75 mm wide and 65 mm deep for inserting APP polymer membrane and shaping horizontal face of groove with cement mortar 1:3, including removal of rubbish outside MoD land, complete all as specified and directed.
Material and labour, water proofing treatment of roof consisting as under:- (a) Applying a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm over a coat of primer @ 0.30 litre/ sq.m including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed at over laps & joints with flame (by torch application) all as per manufacturer’s instructions complete all as specified and directed.
Complete all as per Srl item No. 41 above but on vertical surfaces, using hot blown bitumen having penetration value 30/40 applied 1.20 Kg/ Sq.m over primer @ 0.30 litre/ Sq.m, complete all as specified and directed.
Supply and fixing, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed.
S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples including repacement of broken wooden beadings as required at site complete all as specified and directed.
Hacking out old broken glass (any thickness size, quality or description) from wooden/ steel frames, glazed with putty or fixed with wooden beads/ metal pins complete all as specified and as directed.
S & F 3mm thick Sheet glass ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified. Note:- New steel required for glazing glass in steel window will be paid for separately.
S & F 3mm thick figured glass, pin headed type and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified.
S&F in repairs 19 mm dia Aluminium curtain rod with powder coated along with ornamental attachment at both ends and one set of ornamental decorative MS clamps to fixed to walls complete all as specified and directed.
M&L for preparation of new surfaces of wood and wood based materials of any description and girth, not otherwise described and treated with two coats of synthetic enamel paint over a coat pink primer complete all as directed.
M&L for preparation of new surfaces of steel or iron work of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of primer on steel surfaces complete complete all as specified and directed.
M&L Preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc , filling in crevices and cracks etc with approved filler and applying one coats of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified and directed.
M&L Preparation of old steel painted surfacesl of any description over 10cm width or girth by cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc , filling in crevices and cracks etc with approved filler and applying one coats of synthetic enamel paint to give an even and smooth surface having no sign of brush marks complete all as specified and directed.
M&L Preparation of newly plastered surfaces of wall and applying two coat of Cement Base Paint of approved colour and shade by accepting officers over and including a coat of primer as per manufacturers instructions complete all as specified and directed including necessary scafolding upto 4th floor.
Material and labour preparation of new plastered surfaces and apply two coat of oil bound distmper over a coat of primer, complete all as specified and directed.
M &L for preparation of newly plastered surface of ceiling and applying three coats of white wash complete all as specified .
M & L preparation for old plastered surfaces on walls and applying one coats of cement base paint complete all as specified and directed.
M&L preparation for old surfaces on wall and applying one coats of oil emulsion paint (white or tinted) over a coat of primer with chalk whiting on plastered surfaces complete as specified
M&L preparation of old surfaces on ceiling including cornices pilasters steel scrappers , wire brushing, and efforescent salts and treating oil and greasy spots and applying two coat of white wash on ceilling complete all as specified and directed.
Taking down steel tubing/ PVC 15mm bore and connections including cleaning for refixing or removing to stores complete all as specified and directed.
All as per Srl Item No 59 here in before but 20mm bore complete all as specified and directed.
S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.
S & F 20 mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors complete all as specified and directed. Note : Cutting chases as required shall be measured and paid seperately.
Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc; and cuttings chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth complete all as specified and directed.
S & F in repairs chromium plated shower rose 125mm size incl shower arm casted 190 mm long flat shape for wall mounted showers with flange incl fixing to steel pipe or union complete all as specified and directed.
S & F in repairs Ist quality vitreous china wash basin, white, flat back, size 550x400mm , PVC connections suitable for hot and cold water,bottle trap (with internal partition) 32 mm size with 300mm &190mm long wall connection pipes & wall flange, and fixing withbrackets/bolts including cutting and pinning in etc complete all as specified and directed.
Complete all as per srl item No above 65 but fixing only complete all as specified and directed.
S&F in repairs 15 mm brass CP mixer for mixing hot and cold water screwed down from iron pipe and fixed complete all as specified and directed.
S&F in repairs Cast iron floor trap with dia of outlet 100 mm, with CP grating hinge type in kitchen and other situation including PCC 1:2:4 type B1 for setting the trap and jointing to waste pipe including taking out old floor trap , complete all as specified and directed.
S&F in repairs Cast iron floor trap with dia of outlet 75 mm, with CP grating with hinge in kitchen and bath etc situation including PCC 1:2:4 type B1 for setting the trap and jointing to waste pipe including taking out old floor trap , complete all as specified and directed.
M & L gully traps salt glazed stone ware 150 x 150mm size square mould type ‘S’ or ‘P’ PCC for bed, trap and surrounds shall be 1:3:6 type C- 1 using graded stone aggregate incldg grating of cast iron complete all as specified and directed.
Dismantling of cast iron or reiforced concrete drain pipes jointed in cement mortar and taking out from trenches 100 / 75 mm bore (sand cast) complete all as specified and directed.
Material and labour, 100mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, laid in trenches or in floors including necessary excavation and earth work, complete all as specified and directed.
Material and labour, 100mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts with washers, complete all as specified and directed.
Material and labour, 75mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, laid in trenches or in floors including necessary excavation and earth work, complete all as specified and directed.
Material and labour, 75mm dia cast iron soil, waste and vent pipes (sand cast) in any length with or without ears, including cement jointing, fixed to wall with and including mild steel clamps and bolts with washers, complete all as specified and directed.
S & F cast iron soil 100mm bore bends, diminishing pieces or tapers complete all as specified and directed.
S & F cast iron soil 75mm bore bends, diminishing pieces or tapers complete all as specified and directed.
Taking up/down AC soil ,waste and vent pipe 100mm bore size set in CM all as per specified and directed from walls complete all as specified and directed
S&F 110mm PVC (SWR) pipes single socketed in any length along with rubber ring joint fixed to walls with all accessories complete all as specified and directed.
S&F PVC bend any radius 110 mm bore complete all as specified and directed.
S & F 110mm ,PVC branch pieces (Tee) single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fixed with cement joint complete all as specified and directed
S&F 75mm PVC (SWR) pipes single socketed in any length along with rubber ring joint fixed to walls with all accessories complete all as specified and directed.
S&F PVC bend any radius 75 mm bore complete all as specified and directed.
S&F in repairs vitreous china squating pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed.
S & F in repairs stainless steel sinks with drainage board made out of 1.00 mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm dia and making good to disturbed surfaces, fixed in repairs, complete all as specified.
Dismantling water tanks of capacity exceeding 250 and not exceeding 500 ltrs complete all as specified and directed.
S & F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 500 Litres complete all as specified and directed.
M&L ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 20mm bore dia iron pipe supplied and fixed in repairs complete all as specified and directed.
S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.
S & F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S & F in repairs bib taps, long body cast copper alloy, chromium plated, with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule complete all as specified.
S&F in repairs 15mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.
S&F in repairs 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as specified and directed.
S & F in repairs angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified and directed.
S & F in repairs stop valves, cast copper alloy, chromium plated, fancy type, with long shank and cup (concealed type), screwed down, high pressure, with crutch or butter fly handle, screwed both ends for 15mm bore iron pipe or for unions complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar.
M&L for 18-20 mm thick machine cut kota stone slab as in flooring, steps of stair(treads), set with neat grey cement slurry @ 3Kg/Sqm, laid over and including 20mm thick cement and sand mortar (1:6) screed bed/bedding layer, jointed with grey cement slurry mixed with pigment to match the sahde of the slab including rubbing and polishing ing damaged stone slab of any description complete all as specified
M&L for machine cut kota stone slab 18-20mm thick as in skirting/dado, riser of steps, laid over and including 10mm thick backing coat in CM (1:4), set in neat grey cement slurry @ 3Kg/Sqm, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.
M&L polished marble 18 to 20mm thick, green colour providing edge moulding in approved shade to cooking platform in kitchen laid over 20 mm screed bed of cement mortar 1:6, rounded on edges, jointed and pointed in cement to match complete all as specified and directed.
Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified and directed.
M&L 75 mm thick, plain cement concrete 1:3:6, type C-2, using 40 mm graded mechanically crushed stone aggregates, laid in 1:20 slope as in plinth protection including making joints at 3.00 metre intervals and at each corner, the joint shall be filled with mastic filling (to full depth) comprising of one part heated hot blown bitumen 85/ 25 & two parts heated sand (by volume), surface finished even and smooth without using extra cement, complete all as specified. Note: The concrete shall be laid at a stretch not exceeding 3 metre in length and width of joint shall not be more than 12 mm.
M&L for PCC (1:3:6) Type C-2 50 mm thick using 40 graded stone aggregate as in sub base of floor complete all as specified and directed.
M&L machine pressed precast concrete interlocking paver block coloured and polished of any shape and size confirmeing to IS-15658-2006 of 60 mm thick, M-35 grade over 50 mm thick sand cushioning, etc complete complete all as specified and directed.
M&L sand for sand cusion for interlocking tiles including spreading and levelling complete all as specified and directed.
M&L for PCC 1:2:4 Type B-1 (using 20mm stone crushed agg.) as in rounded or chamfered on edges in any description complete all as specified and directed.
Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed
M&L Brick work with sub class 'B' Bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 complete all as specified and directed.
S&F mild steel Godrej pattern cupboard with back, sides, top, bottom, 02 shelves & mild steel shutter two leaves with frame , incl necessary fittings of 18 gauge MS sheet with locking arrangement and handle etc all as per Godrej pattern with duplicate keys including necessary fittings & 19mm stainless steel rod for hanging cloths & two coats of spray painting over a coat of red oxide zinc chromate primer complete. The frame of cupboard to be fixed to wall with 6 Nos fastners.The cost of fastners & grouting them is deemed to be included in unit rates complete all as specified and as directed. Note:- Superficial area shall be measured, Approx Size (1150x1920x600mm) .
S& F in Repairs Stainless steel Kitchen Plate Rack of size 775mm x 750mm x 250mm of 1 mm thick stainless steel sheet with all internal fittings, and fixed to wall by means of rawl plug steel screws including washer complete all as specified and directed.
Supply, lay, test and connect in repair GI Tubes, 25 mm dia bore medium grade with all fitting and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.
Supply and fix in repair gun metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete of size 25mm
Taking down old point wiring complete for light/fan/socket(5/15 Amps) bell point etc complete with all light fittings accessories, such as switch sockets 5/15 Amps ceiling rose etc including making good to the disturbed surface to match with the existing complete all as specified and directed.
M&L for concealed point wiring for the following the PVC insulated and unsheathed cable 1.5 sq mm (nominal area), multistranded copper conductor 1100 Volts, FRLS grade, single core including PVC conduit medium grade of appropriate size (not less than 25 mm dia) ISI marked concealed in wall and surface on ceiling complete with all accessories and all as specified including 1.5 sq mm PVC insulated unsheathed multistranded copper conductor to common earth and connected to earth dolly for following :- Note : 1. The cutting chases shall be finished with cement mortar (1:4) and surface shall be matched with existing surface by using putty, POP etc and applying finishing coat of existing treatment without any extra cost. 2. Rate quoted by the contractor deemed to be included metal flush box of suitable size as required at site and 3 mm thick laminated sheet suitable for mounting of switch and socket etc .
One light point control by one switch
One ceiling fan/exhaust fan control by one switch
One 3 pin socket outlet, 5 Amps independent
One 3 pin 5 amps socket outlet on the same board with other switches
One bell/buzzer point contolled by one push button independent
One light point controlled by two 2-way switches, with cables 1.5 sq mm size
Complete all as per item No. 114 above but with wire 4.0 sq mm cable for switch socket outlet 3 pin 15 Amps with 4.00 sq mm as earth continuity conductor. (FOR 15 Amps socket point) complete all as specified and directed.
Complete all as per item No. 114 above but wire 4.0 sq mm cable for switch socket outlet 3 pin 15 Amps with 4.0 sq mm as earth continuity conductor. (For Geyser point) complete all as specified and directed.
S & F switch piano flush type one way 5 Amps complete all as specified and directed.
Supply and fix ceiling rose three terminal complete all as specified and directed.
S & F socket outlet 2 in 1, 3 pin, 5 Amps complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin, 5 and 15 Amps flush type complete all as specified and directed.
S&F switch piano, flush ype single pole 15 Amps
Supply and fixing bell push flush type 5 Amps
S & F In replacement of Piano type switch 2 way, 6 Amp ISI Marked complete all as specified and as directed.
S&F call bell multi music type, AC 230 Volts, single pole complete all as specified and directed.
Supply and fixing in repair LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
Supply and fixing in repair lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
Supply and fixing repair LED lamp 10 watts (Twist lamp), 180 degree rotationl movement, 70 degree swivel movement, diffuser for glare free distribution, base cap B22, 1000 lumens complete all as specified and directed.
Supply and fixing in repair LED tube light fitting mirror type with high output diffuser 2 feet, 10 watts 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
Taking down carefully exsiting ceiling fan of any size, sealing cable end, dismantling blades and removing fan and blades and kept aside for reuse complete all as specified and directed.
M&L for painting of ceiling fans complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc complete all as specified and directed.
Supply and fixing stepped type electronic fan regulator flush type
M& L for making hole to the existing wall surface of any type/girth and at any height for fixing of exhaust fan 200 mm sweep and make good to match with the existing surfaces complete all as specified and directed.
Supply and fix ventilating exhaust fan single phase, plastic body 200 mm sweep, complete with shutter and louvers and exhaust fan shall be fixed with suitable size of buzzer bolt/hold fastener as approved by Engr-in-charge complete all as specified and directed.
Supply and fix in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.
S & F in repair MCB DB double door SPN 12 Way with 200 Amps rated copper bus bar complete all as specified and directed.
S & F in repair MCB DB double door SPN 8 Way with 200 Amps rated copper bus bar (One No. of stair case wiring) complete all as specified and directed.
S & F in repair MCB DB double door SPN 4 Way with 200 Amps rated copper bus bar (One No. of stair case wiring) complete all as specified and directed.
S & F MCB SP 6-32 Amps, 240V, 10 KA, 'C' curve complete all as specified and directed.
S&F MCB SPN 6-32 Amps, 240V,10 KA, 'C' curve (for SPN DB 4 way)
S&F RCBO's double pole 100 mA for earth leakage, overload & short circuit protection of capacity 40 Amps complete all as specified and directed.
Supply and fixing in repair LED bldg security light fitting 35 watts 230 V AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including suitable size of GI bracket for mouting of security light to be bend as required shape, pipe bracket shall not be less than 1.2 Mtr length and suitable size 02 Nos MS clamps and nuts and bolts complete all as specified and directed.
S & F in repair sub main wiring for circuit of size 6 sq mm 2 core (FRLS) alongwith earth wire of 6 sq mm single core of FRLS PVC insulated unsheathed cable, 1100 volts grade with multistranded copper conductor including PVC conduit (conealed wiring) of suitable size complete all as specified and directed. (FOR SPN DB's )
Complete all as per item No. 142 above but of wire 1.5 sq mm two runs and 1.5 sq mm single run as earth wire. (for Bldg street light and common area lighting)
Supply and laying in repair and testing cable XLPE insulated, screned, PVC bedded galvanized steel strip or wire amoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6.0 sq 2 core (FOR GARAGGE 4 WAY DB)
M&L for earthing to switch gear/MCB DB with mild steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to galvanised earth lead wire 4.0 mm dia by means of galvanised iron nuts, bolts and washer, earth lead connected to eqpt as directed, earth plate surrounded with adequate quantity of charcoal dust mixed with common salt to a packed thickness of 15 cm all around the plate including necessary earth work, PCC chamber and reinforced PCC cover made by PCC 1:3:6 type C-1 as in pit chamber and RCC pit cover 50 mm thick precast RCC 1:2:4 type B-1 duly reinforced with 6mm dia MS bar at 150mm c/c both ways with 10 mm dia MS round bar as handle, 20 mm bore GI pipe medium grade for watering and 15 mm dia GI pipe light grade for protection of earth lead up to 7.5 mtr with funnel, wire mesh etc with and including testing complete all as specified and as shown in electrical plate No 3 of MES sch Part I. (for existing Block Panel)
M&L for earthing continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed or any other indicated situation for loop earthing etc. As required 4 mm dia galvanised iron or steel wire complete all as specified and directed.
M&L for hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.
Supply and laying in repair and testing cable XLPE insulated, screned, PVC bedded galvanized steel strip or wire amoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core (for each block incomer cable) complete all as specified and directed.
M&L for scrapping the old painted surfaces and spray painting of LT panel board of size upto 1.4 m x 1.2m x 0.6 m with two coats of synthetic enamelled paint of approved colour complete with all fittings etc all as specified and directed. (Note : 1. Rate quoted by the contractor deemed to be included the writing of outgoing and incoming feeder etc.
S & F MCB SPN 40 Amps (for replacement in Existing LT panel/Meter panel)
Excavation in trenches in hard/dense soil not exc. 1.5 metre wide and n'exc. 1.50m deep for laying cables/pipes/poles and getting out complete all as specified and directed.
Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and directed.
Removing excavated material in hard/dense soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and directed.
M&L for sand cushning to U/G cable in layers of 23cm thick( 8 Cm before laying the cable and 15Cm thick after laying the cable) in trenches including watering and consolidation, complete all as specified and directed.
Supply and lay well burnt brick class B of size 250 x 110 x 75 mm as protection to cable in cable trenches all as specified and directed
Taking down old u/s LT UG cable of size 35 sq mm 3.5 core complete all as specified and directed.
Net Contract Sum will be after deducting Sch of Credit of Rs 2,04,419.00
CHOPRA BUILDERS
M P TYAGI ENGINEERS AND CONTRACTORS
M/s Innovative Coolings and Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .