Construction of 132 KV DC Transmission Line from Power Pooling Station Kishtwar to existing Grid Sub Station of Kishtwar

PART-A Engineering design,supply of tower accessories ,lattice type tower structures line material & accessories for INSERTION OF 01 NO.TOWER IN 132 KV S/C UDHAMPUR-DHP Transmission LINE.

Danger Plate

Number Plate

Phase plate

Circuit Plate

Anti Climbing Device

Counter poise Earthing Material

Nuts & Bolts with washers

SPL 2 Type Towers with 3Mtr. body Extension with Normal stubs

+3 mtr Raised Chimney Stubs for SPL 2 type tower ( 1 Sets)

ACSR Panther conductor

Mid span joints for conductor

Vibration Damper

Repair Sleeves

Galvanized strended steel ground wire of size 7/3.15 mm.

Mid span joints for ground wire

Vibration Damper for ground wire

Earthwire tension clamps

120 KN EM strength porcelain disc insulators

Double tension insulator fittings

Single tension insulator fittings

Tag Welding of towers

Engineering, Design & Casting of foundations including all activities like stub setting, supply and installation of earthing device, reinforcement, concreting, excavation, back filling, shuttering, benching, dewatering etc

SPL 2 Type tower with 3Mtr Body Extension

3 mtr Raised Chimney for SPL 2 Type Tower

Erection of various type of tower including leg extension complete with nuts and Bolts including tack welding and fixing of tower accessories.

SPL 2 Type Towers with 3Mtr. Body Extension -1 NO. TOWERS(Including stubs)

Installation of insulator strings complete with necessary hardwares, laying and stringing of ACSR panther conductor including fixing of conductor accessories and temporary anchoring of towers laying and stringing of earth wire including fixing of earthwire accessories for the S/C line.

Providing of protection to the tower footings in 1:6 R S masonary work including lean pad/PCC,DPC,Couping,back filling stone,filter stone including pointing in 1:4 As required and also getting drawings approved from concerned authority

SURVEY AND CHECK SURVEY INCLUDING SOIL INVESTIGATION ,SOIL CLASSIFICATION, TOWER PROFILE AS PER KEC TOWER SPOTTING DATA, ETC.

PART-B Engineering design,supply of tower accessories ,lattice type tower structures line material & accessories for LAYING OF 132 KV D/C TAP LINE, CONNECTING 132 KV S/C DHP LINE FEEDING POWER TO GSS NHPC.(ACSR PANTHER)

Danger Plate

Number Plate

Phase plate

Circuit Plate

Anti Climbing Device

Counter poise Earthing Material

Nuts & Bolts with washers

SPL-1 Type Towers with 3Mtr.Body Extension. 1 NO. TOWERS With Normal Stubs

SPL-1 Type Towers with 6Mtr.Body Extension. 1 NO. TOWERS With Normal Stubs

SPL-2 Type Towers with 3Mtr.Body Extension -2 NO. TOWERS With Normal Stubs

SPL-2 Type Towers with 6Mtr.Body Extension -1 NO. TOWERS With Normal Stubs

+3 mtr RC Stubs for SPL-1 Tower.( 1 Sets )

+6 mtr RC Stubs for SPL-1 Tower ( 1 Sets )

+3 mtr RC Stubs for SPL-2 Tower ( 3 sets )

+6 mtr RC Stubs for SPL-2 Tower ( 1 sets )

ACSR Panther conductor

Mid span joints for conductor

Vibration Damper

Repair Sleeves

24 FIBRE (DWSM) OPGW Fibre Optic Cable

Tension Assembly - Double Tension pass through Asssembly for 24 F OPGW

Tension Assembly - Dead End for 24 F OPGW

Vibration Damper for 24 F OPGW

Down Lead Clamp Assembly for 24 F OPGW

Joint Box for 24 F OPGW

OPGW Fibre Optic Distribution Panel (FODP) Indoor Type 96 F

24 F (DWSM) Approach Fibre Optic Cable including all installation hardware set

120 KN EM strength porcelain disc insulators

Double Tension Fittings For Single Panther Conductoras per GTP- Drawing. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120 KN.

Single Tension Fittings For Single Panther as per GTP- Drawing. The ball and socket designation must be 20mm. Minimum Ultimate strength (Tensile strength) shall be 120 KN.

Tag welding of towers

Engineering ,Design, Casting of foundations including all activities like stub setting, supply and installation of earthing device, reinforcement, concreting, excavation, back filling, shuttering, benching, dewatering etc

SPL-1 Type Towers with 3 mtr body Extension

SPL-1 Type Towers with 6 mtr.body Extension

SPL-2 Type Towers with 3 mtr. body Extension

SPL-2 Type Towers with 6 mtr. Body Extension

+3 mtr Raised chimney for SPL-1 type towers

+6 mtr Raised chimney for SPL-1 type towers

+3 mtr Raised chimney for SPL-2 type towers

+6 mtr Raised chimney for SPL-2 type towers

Erection of various type of tower including leg extension complete with nuts and Bolts including tack welding and fixing of tower accessories.

SPL-1 Type Tower with 3 mtr Body extn including stubs - 1 NO. TOWERS

SPL-1 Type Tower with 6 mtr Body extn including stubs - 1 NO. TOWERS

SPL-2 Type Tower with 3 mtr Body extn including stubs - 2 NO. TOWERS

SPL-2 Type Tower with 6 mtr Body extn including stubs - 1 NO. TOWERS

Installation of insulator strings complete with necessary hardwares laying and stringing of ACSR panther conductor including fixing of conductor accessories and temporary anchoring of towers laying and stringing of earthwire including fixing of earth wire accessories for the linefor D/C Line

Installation of insulator strings complete with necessary hardwares laying and stringing of ACSR panther conductor including fixing of conductor accessories and temporary anchoring of towers laying and stringing of earthwire including fixing of earth wire accessories for the line for S/C Line

Installation of 24 F DWSM OPGW alongwith associated hardware fittings & vibration dampers

Installation of Joint box above ground including splicing and testing for 24 F

Installation of Fibre Optic Distribution Panel Indoor type: FC Coupling and mounted on ETSI 19'' rack or slimline rack Type 2 96 Fibre

Providing of protection to the tower footings in 1:6 R S masonary work including lean pad/PCC,DPC,Couping,back filling stone flush pointing in cement mortar 1:4 filter stone As required and also getting drawings approved from concerned authority

Earth work in bulk exacavation by manual means including disposal of the same, lead upto 50 mtrs and lift upto 1.5m for maintaining ground clearance as directed by Engineer-in-Charge

Dismantling of tower material including tower accessories, nuts & bolts and washers including manual carriage from site to loading site, loading into vehicle and right back to Divisional store Udhampur including unloading, sorting and stacking etc..

Dismantling of insulator strings complete with necessary hardwares, conductor accessories, earth wire, including acessories for the line including manual carriage from site to loading site, loading into vehicle and right back to Divisional store Udhampur including unloading, sorting and stacking etc..

Dismantling of earth wire complete with necessary hardwares, including acessories and manual carriage from site to loading site, loading into vehicle and right back to Divisional store Udhampur including unloading, sorting and stacking etc..

Installation of 24 F Fibre Optic Approach Cable including hardware like ties, clips, cleats, conduits, ducts, supports, fittings etc.

SURVEY AND CHECK SURVEY INCLUDING SOIL INVESTIGATION ,SOIL CLASSIFICATION, TOWER PROFILE AS PER KEC TOWER SPOTTING DATA, ETC.

Engineering Design, supply of Tower Accessories, lattice type tower structures line material & accessories for laying of 132kv D/C RKKTL TAP LINE, CONNECTING 132KV D/C RAMBAN KHELLANI KISHTWAR TX LINE FEEDING POWER TO GSS KISHTWAR(ACSR PANTHER)

Danger Plate

Number Plate

Phase plate

Circuit Plate

Anti Climbing Device

Counter poise Earthing Material

Nuts & Bolts with washers

DD Type tower with 0 mtr Body Extn Inclding Normal Stubs - 1 NO TOWER

DD Type tower with 3 mtr Body Extn Inclding Normal Stubs - 1 NO TOWER

SPL-1 Type Tower With +0 mtr body Extn including normal stubs -1 NO. TOWERS

SPL-2 Type Tower With +0 mtr body Extn including normal stubs -1 NO. TOWERS

SPL-2 Type Tower With +3 mtr body Extn including normal stubs -2 NO. TOWERS

SPL-2 Type Tower With +6 mtr body Extn including normal stubs -1 NO. TOWERS

+3 mtr Raised chimney (RC) Stubs for DD Tower ( 1 Sets )

+6 mtr RC Stubs for DD Tower ( 1 Sets )

+3 mtr RC Stubs for SPL-1 Tower ( 2 Sets )

+6 mtr RC Stubs for SPL-1 Tower ( 1 Sets )

+3 mtr RC Stubs for SPL-2 Tower ( 7 Sets )

+6 mtr RC Stubs for SPL-2 Tower ( 1 Sets )

Design, Engineering, Supply,fabrication,galvanization of Multi Circuit - Multi Directional tower, for the evacuation of power from Pooling station Kishtwar. The tower must be got vetted from CPRI expertised in Transmission lines dealing with multi circuit towers as well.

Multi Circuit tower Including Stubs

Multi Circuit-Multi Directional Tower with 3 mtr body extn Including Stubs

+3 mtr Raised Chimney Stubs for Multi Directional towers ( 1 Sets )

+6 mtr Raised Chimney Stubs for Multi Directional towers ( 1 Sets )

ACSR Panther conductor

Mid span joints for conductor

Vibration Damper

Repair Sleeves

24 FIBRE (DWSM) OPGW Fibre Optic Cable

Tension Assembly - Double Tension pass through Asssembly for 24 F OPGW

Tension Assembly - Dead End for 24 F OPGW

Vibration Damper for 24 F OPGW

Down Lead Clamp Assembly for 24 F OPGW

Joint Box for 24 F OPGW

OPGW Fibre Optic Distribution Panel (FODP) Indoor Type 96 F

24 F (DWSM) Approach Fibre Optic Cable including all installation hardware set

120 KN EM strength porcelain disc insulators

Double tension insulator fittings

Single tension insulator fittings

Tag Welding of towers

Erection of various type of tower including leg extension complete with Nuts & bolts including tag welding and fixing of tower accessories.

DD type tower With +0 mtr Body extn including Stubs ( 1 Tower)

DD type tower With +3 mtr Body extn including Stubs (1 Tower)

SPL-1 Type Towers with +0 mtr Body Extn including Stubs (1 Tower)

SPL-2 Type Towers with +0 mtr Body Extn including Stubs (1 Tower)

SPL-2 Type Towers with +3 mtr Body Extn including Stubs (2 Towers)

SPL-2 Type Towers with +6 mtr Body Extn including Stubs (1 Tower)

Multi Circuit tower with 0 mtr Body Extn Including Stub ( 1 Tower)

Multi Circuit Multi Directional tower with +3 mtr Body Extn Including Stub ( 1 Tower)

Installation of insulator strings complete with necessary hardwares laying and stringing of ACSR panther conductor including fixing of conductor accessories and temporary anchoring of towers laying and stringing of earthwire including fixing of earth wire accessories for the D/C line.

Installation of insulator strings complete with necessary hardwares laying and stringing of ACSR panther conductor including fixing of conductor accessories and temporary anchoring of towers laying and stringing of earthwire including fixing of earth wire accessories for the line for S/C Line

Dismantling of insulator strings complete with necessary hardwares, conductor accessories, earth wire, including acessories for the line including manual carriage from site to loading site, loading into vehicle and right back to Divisional store Udhampur including unloading, sorting and stacking etc.. S/C line.

Dismantling of earth wire complete with necessary hardwares, including acessories and manual carriage from site to loading site, loading into vehicle and right back to Divisional store Udhampur including unloading, sorting and stacking etc..

Installation of 24 F DWSM OPGW alongwith associated hardware fittings & vibration dampers

Installation of Joint box above ground including splicing and testing for 24 F

Installation of Fibre Optic Distribution Panel Indoor type: FC Coupling and mounted on ETSI 19'' rack or slimline rack Type 2 96 Fibre

Installation of 24 F Fibre Optic Approach Cable including hardware like ties, clips, cleats, conduits, ducts, supports, fittings etc.

SURVEY AND CHECK SURVEY INCLUDING SOIL INVESTIGATION ,SOIL CLASSIFICATION, TOWER PROFILE AS PER KEC TOWER SPOTTING DATA, ETC.

Casting of foundation including all activities like stub setting, supply and installation of earthing device, reinforecement, concreting, excavation, Back filling, shuttering ,benching, dewatering etc.

DD type towers Foundation

SPL -1 Type Towers Foundation

SPL -2 Type Towers Foundation

+3 mtr Raised Chimney of SPL-1 Type Towers

+6 mtr Raised Chimney of SPL-1 Type Towers

+3 mtr Raised Chimney of SPL-2 Type Towers

+6 mtr Raised Chimney of SPL-2 Type Towers

Preparing of foundation design, getting it vetted by the CPRI and Casting of foundation including all activities like stub setting, supply and installation of earthing device, reinforecement, concreting, excavation, Back filling, shuttering ,benching, dewatering etc. in all respect.

Multi Circuit tower With +0 mtr Body Extn.

Multi Circuit Multi Directional tower with +3 Mtr body Extn.

+3 mtr Raised chimney of Multi Circuit Multi Directional Tower

+6 mtr Raised chimney of Multi Circuit Multi Directional Tower

Providing of Protection work to the tower footings in 1:6 RS masonry work including lean pad/PCC,DPC,Couping,back filling stone,filter stone including flush pointing in cement mortar 1:4 As required and also getting drawings approved from concerned authority

Earth work in bulk exacavation by manual means including disposal of the same, lead upto 50 mtrs and lift upto 1.5m for maintaining ground clearance as directed by Engineer-in-Charge

Construction /expansion of exisiting control building /RCC Protection wall and Path at grid sub-station kishtwar

Earth work in bulk excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m.

All kinds of soil

Ordinary rock

Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:1:4:8

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with4.4.5 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Brick work with common burnt clay Modular bricks of class designation 7.5. in foundation and plinth including curing complete in :Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Brick work with common burnt clay Modular bricks of class designation 7.5. in foundation and plinth including curing complete in : Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for:Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for:Columns, pillars, piers, abutments, posts and struts

Providing laminated veneer lumber conforming to IS. 14616 and TAD-15: 2001 (part B) in factory made frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length including hold fast lugs or with dash fasteners

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butthinges bright finished of required size with necessary screws).35mm Second class deodar wood

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35mm Second class deodar wood

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Riveted and bolted

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. .60 mm thick with zinc coating not less than 350 gram/m2

Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde syntheticresin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminum primer on both sides & edges, including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodized aluminum (with 15 micron anodic coating) Tsections 35 x15x1.5 mm size main runners, cross runners 23.5x19x1.5 mm fixed to main runners placed 600 mm centre to centre both ways so as to form a grid of 600 mm square. The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer including aluminum frame work

P/F of Aluminium Frames with glass panes including all accessories for cabin door/ windows, partitioning

12mm Cement plaster finished with a floating coat of neat cement of mix: 1 : 4 ( 1 cement : 4 fine sand)

Dry stone pitching 22.5 cm thick including supply of stones and preparing surface complete

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 13.88.2 2 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. 13.93.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ liter

Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and includingbase coat of exterior primer applied @ 2.20kg/10s

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution.

Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade on new work Two or more coats

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement: 3 coarse sand:6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mmnominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Repairing of existing electric wiring in control room including replacement of damaged fittings/accessories where ever required alongwith provision of wiring in extended portion of control room with similar arrangement as provided in existing control room building and providing of fitting and acessories as per existing pattern . P/F of LT distribution board as per site requirement (completejob)

RCC PROTECTION WALL/B/WALL ( BALANCE PORTION ) AT 132/33 KV GRID SUB STATION KISHATWAR in ratio 1:2:4 after approval of drawings from concerned authority.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead : in cement mortar

Dismantling wood work in frames, trusses, purlins and rafters upto 10 meters span and 5 meters height including stacking the material within 50 meters lead : 15.14.2 Of sectional area below 40 sqcm

Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 meters lead ofG.S. Sheets

construction of under ground water tank in cement concrete 1:2:4 including excavation ,backfilling,shuttering and disposal of surplus soil etc.

construction of drain around control room in PCC 1:3:6

Making of concrete approach path upto guest house in 1:3:4

RCC Protection Work for 15 No. Of Towers

Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m for All kinds of soil.

CEMENT CONCRETE (CAST-IN-SITU) Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 40 mm nominal size) including supply and all type of carriages.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 5.2.1 DELETED 5.2.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)) including providing and placing PVC pipes 100 mm dia for weep holes. including supply and all type of carriages

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. including supply and all type of carriages

Centring and shuttering including strutting, propping etc. and removal of form for 5.9.2 Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc including supply and all type of carriages.

Filling good earth in trenches, plinth, sides of foundations making of required platform at the base of tower etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m. including supply and all type of carriages.

Dumping/filling of stone in Horizontal on level behind the retaining wall as filter stone including supply of stone, including supply of stone and all type of carriages.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering including supply and all type of carriages.

Steel bars of any size/ dia for use in RCC protection work (Balance portion /water tank)

Earth work for construction of drain around control room

PCC for drain around control room M10

PCC for drain around control room M15

Earth work for Making of concrete approach path upto guest house

PCC in M10 for Making of concrete approach path upto guest house

Spare Material to be supplied at divisional store including unloanding stacking etc.

Single Tesnion fitting for single panther as per GTP/Drawing. The ball and socket designation must be 20mm. minimum ultimate strength ( Tensile strength) shall be 120KN

Single suspession fitting for single panther as per GTP/Drawing. The ball and socket designation must be 20mm. minimum ultimate strength ( Tensile strength) shall be 120KN

Double Tesnion fitting for single panther as per GTP/Drawing. The ball and socket designation must be 20mm. minimum ultimate strength ( Tensile strength) shall be 120KN

PG Clamps 0.4 made of Alminium Alloy and shall comply in all respect with IS: 5561-1970 (latest edition) for panther

T Clamps 0.4/0.4, made of alminium alloy and shall comply in all respects with IS: 5561-1970 (latest edition) for panther

Mid Span compression joint (panther)

G.I Nuts & Bolts of sorts ( 16mm dia) ( hot dipped )

Spring washers ( G.I hot dipped)

Disc Insulators 120 KN,Ball & Socket type, .

Spare T & P Items to be supplied at divisional store including unloanding stacking etc.

12 volt rechargable search light with inbuilt charger complete with dimmer & flasher of reputed make such as VKS etc

Insulated cutting pliers 12 inches size of reputed make

Insulated cutting pliers 8 inches size of reputed make

Screw driver 18 inches size of reputed make

Screw driver 12 inches size of reputed make

Hammer 8 Lbs.

Hammer 2 Lbs.

Chainsaw 22”, 2.4 hp of reputed make

Iron cutter 14”, 2300 W of reputed make

Hand operated Hydraulic Compression 100 ton Press Machine Set with die set for Transmission Line ( as per sample provided by the deptt.)

Die Set Hex 43 Aluminium for panther/ zebra Set (as per sample provided by the deptt.)

Die Set Hex 25.5 Steel for G wire Set as per sample(as per sample provided by the deptt.)

Automatic Clamp (Self Griping) 18-24 mm 132KV for casablance to Drake

Chain Block Lifting 5 Ton X 6 Mtr

Four Sheave Pulley 8 Ton

Single Sheave Pulley Open I Type 5 Ton

Single Sheave Pulley Close I Type 5 Ton

Single Sheave Pulley Open I Type 8 Ton

Single Sheave Pulley Close I Type 8 Ton

Steel Wire Rope 16mm Dia.

Steel Wire Rope 12mm Dia.

6 Bolted Come Along Clamp for panther (Aluminium ) as per sample provided by the deptt

D Shackle 6.5 Mt

D Shackle 8.5 Mt

PP Rope 18mm (110 m) Bundle

PP Rope 20mm (110 m) Bundle

Bull dog Clamp 16mm

Bull dog Clamp 12mm

Safety Gloves 33 kV Pair

Safety shoes knee height Pair

Safety belt, minimum 2 m rope length along with scaffold hook - Class-A material suitable for EHV TransmissionLine maintenance staff (PN56 & 351)(Double lanyard with padded straps and supports) hook - Class-A material suitable for EHV Transmission

Safety helmet with rachet

Safety helmet with rachet and LED Lights

snow shoes(Duck back) of different sizes

Please Enable Macros to View BoQ information