OT-24

Amount

Clearing the scrub jungle and disposing the debris to a suitable place away from the site as directed by the engineer at site including all labour charges, hire charges for vehicle, tools and plants required, leads & lifts etc., complete.

Supplying and filling with Gravel in layers for basement well rammed, watered, consolidated as directed by the Engineer at site, including cost of filling sand, cost of labour, leads, lifts, etc. Complete

Providing PCC 1:3:6 using 20 mm HBG metal for pavement as directed by the Engineer at site, including cost of all materials, labours, lead, lift, shuttering, curing, etc,complete.

Pressure grouting to the RCC walls of clarifier and storage for arresting leakage/ dampness etc.to the clarifier and storage tank in PTP area as directed by the Engineer at site. [The rates include providing holes in the wall, fixing nipple using rendroc plug or equivalent materials and pressure grouting of cement slurry mixed with admixtures of cebex 100 or its equivalent etc.,] including cost of all materials, labour charges, scaffolding, leads, lifts, etc., Complete.

Providing RCC 1:1½: 3 using 20 mm HBG metal for the staircase in storage tank in PTP area as directed by the Engineer at site, including cost of all materials, labours, lead, lift, shuttering, curing, etc, complete

Supplying, fabricating and placing in position of steel reinforcement for RCC works in PTP area as directed by the Engineer at site including cost of steel, binding wire, labour charges for cutting, bending, binding, lead and lift etc., complete.

Dismantling the brickwork for providing new door in CHP Control room, clearing of debris to a faraway place including cost of all materials, labour charges, T&P's, finishing the dismantled surface neat us with brick masonry & cement mortar, lead, lift etc complete.

Brick work in CM1:4 using Fly ash bricks for Cupboard support wall , etc. as directed by the Engineer in-charge including cost of all materials, labour charges, T&P, curing, leads, lifts, etc., complete.

Supplying and laying one side polished Cuddapah slab of 20/30 mm thick for shelves including cost of all materials, labour, lead, lift etc., complete.

Plastering in C.M 1:5,12 mm thick for wall surfaces in Dozer shed area including cost of all materials, labour charges, curing, lead, lift etc complete.

Removing the aluminium glazed partition, doors and stacking the same carefully for reuse including all labour charges, hire charges for tools & plants, leads & lifts etc. complete. and as directed by the Engineer in-Charge.

Re fixing the door alongwith frames in position including cost of all materials, labour charges, T&P's, lead, lift etc. complete as directed by the Engineer in charge.

Colour washing with two coats of cement paint over one coat of white cement for the exterior surfaces including cost of all materials, labour, lead, lift etc., complete.

Supplying, Fabricating and Fixing in Position of MS fully paneled steel Door of single leaf of required size using 40x40x6 mm MS Angles for door frame, 30x30x5mm MS Angles for shutter frame by adopting 5 Nos. horizontally, 2 nos. vertically, shutter covered with 18 Gauge MS sheet, finished neatly as directed by the Engineer at site, including cost of all materials, providing locking arrangements, holdfast, hinges, labour, lead, lifts, etc complete.

Providing Cup-board Shutter using termite/ waterproof plywood of 19mm thick over which laminated sheet of 0.80mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol alongwith necessary furniture fittings such as hydraulic hinges, tower bolt, handles, aldrops, multipurpose locks etc.including cost of all materials, labour charges, T&Ps, leads and lifts etc. complete as directed by the Engineer in charge at site.

Supplying, fabricating and fixing of M.S structural works using M.S angle of various sizes for vertical and other supports etc., as directed by the Engineer at site including cost of all materials, labour charges, scaffolding, welding, bolts and nuts as required, lead, lift, etc., complete.

Supplying and fixing of colour coated galvalume sheet of 0.47mm thick of approved quality with necessary screws including cost of all materials, labour charges, lead, lift, etc., complete.

Painting the structural steel work with two coats of enamel paint of approved quality and colour over a coat of primer including cost of all materials, labour charges, scaffolding charges, brushes, lead, lift, etc., complete.

Supply and fixing in position of PVC water tank of capacity 1000 litre, of approved make in toilets near Bulldozer shed & Silo weigh bridge including cost of transporting, lifting and fixing, cost of all materials labour charges including fixing, lead, lift, etc., complete.

Supplying and laying in position of following dia GI pipe line of medium class (B class) of approved make as directed by the Engineer in charge for water supply arrangements in toilets near Bulldozer shed & Hydrogen plant including cost of all pipes, specials such as Tees, bends, couplings, union, cutting, threading, joining, labour, lead, lift etc., complete. (a)25mm G.I.Pipe.

Supplying and laying in position of following dia GI pipe line of medium class (B class) of approved make as directed by the Engineer in charge for water supply arrangements in toilets near Bulldozer shed & Hydrogen plant including cost of all pipes, specials such as Tees, bends, couplings, union, cutting, threading, joining, labour, lead, lift etc., complete. (b)20mm G.I.Pipe.

Supplying and fixing in position of following dia. Gun Metal wheel valves/Gate valve of (Heavy duty) approved quality including cost of materials, labour charges for fixing, lead, lift etc., complete. (a)50mm Gun metal Gate Valve

Supplying and fixing in position of following dia. Gun Metal wheel valves/Gate valve of (Heavy duty) approved quality including cost of materials, labour charges for fixing, lead, lift etc., complete. (b)25mm Gunmetal Wheel Valve

Supplying and fixing in position of following dia. Gun Metal wheel valves/Gate valve of (Heavy duty) approved quality including cost of materials, labour charges for fixing, lead, lift etc., complete. (c)20mm Gunmetal Wheel Valve

NVS and Co