REPAIR/MAINTENANCE OF INTERNAL WIRING, FITTINGS FIXTURES, CONNECTED ITEMS AND SUMMER/ COOLING APPLIANCES IN OTM/MD ACCN AT SUNDERBANI INCLUDING REPAIR/MAINTENANCE OF LIGHTENING CONDUCTOR AT 102 AP SUNDERBANI UNDER GE (NORTH) AKHNOOR

Amount

Taking down carefully copper/aluminium point wiring (light,fan,bell, socket or power) complete,including fixtures and fittings such as switches, ceiling roses, holders,regulators, sockets, tube light fittings and including making good the disturbed surfaces to match with existing surface by colouring with the required shade, putty and white cement at necessary holes for smooth finishing complete all as specified and directed.

Material and labour for point wiring complete with 1.5 sqmm PVC insulated, FRLSH type, ISI marked,conforming to IS-694/1990 unsheathed, multistranded, single core, copper conductor cable 1100 volts grade colour code cables with PVC casing capping medium grade (MMS) and including cutting, chiselling work at any height and all accessories concealed in walls / roofs / floors / ceiling etc. flush mounting MS box with top,bottom,side/back wall knockout for conduit entry from any direction made out of 1.60mm thick suitable for fixing of modular top cover ,blanking plate as per numbers of switch modules, modular switches,sockets,fan regulators,red colour indicator, blank plates etc as approved coloures including 1.5 Sqmm PVC insulated multistranded FRLSH type unsheathed(Green colour),single core cable with copper conductor cable as earth continuity conductor and connecting to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour coat including providing putty and white cement for smooth finishing of existing surface complete all as specified and directed for the following:- (Note:- All necessary accessories such as modular box,top cover plate, blank plate,MS box,screws,washers and are to be used same make/brand only and shall be deemed in to included in quoted rate only.)

One light point controlled by one switch.

One fan point controlled by one switch and one regulator.

One Exhaust fan point controlled by one switch .

One 5 pin 6 amps socket point controlled by one 6 amps switch on independent board .

One 5 pin 6 amps socket point controlled by one 6 amps switch on same board .

One bell/buzzer point controlled by one bell push.

One light point controlled by two 2 way switches.

-Ditto- All as per item No.2 above,but point wiring with 2.5 sqmm and earth conductor of size 2.5 sqmm complete all as specified and directed for the following:-

One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on independent board.

One 6 pin 16/6 amps socket outlet point controlled by one 16 amps switch on same board.

-Ditto- All as per item No.3 above ,but point wiring with 4.0 sqmm and earth conductor of size 4.0 sqmm complete all as specified and directed.

Supply & fixing modular type switch 6 Amps, single pole,1way,1 or 2 module,240V, ISI Marked complete all as specified and directed.

Supply & fixing modular type switch 10 Amps ,2way,single pole,1 or 2 module,240V, ISI Marked complete all as specified and directed.

Supply & fixing modular type bell push 6 Amps,1/2 module, single pole, 240 volts, ISI Marked Complete all as specified and directed.

Supply & fixing modular type switch 16 Amps, single pole,1way,1 or 2module,240V, ISI Marked Complete all as specified and directed.

Supply & fixing modular type socket shuttered type 6 Amps, 2/3 Pin combined 2 module,240V,AC ISI Marked Complete all as specified and directed.

Supply & fixing modular type socket 6 A/16 Amps, 6 Pin combined shuttered socket 2/3 module with light indication ,240V,AC ISI Marked Complete all as specified and directed .

Supply & fixing fan regulator modular type electronic, stepped type(01 to 4/5) 240Volts,AC,ISI marked complete all as specified and directed.

Supply & fixing call bell AC, 230 Volts single pole, multi music type ISI marked, complete all as specified and directed.

Supply & fixing angle lamp holder, insulated body with back plate for batten fittings including LED lamp 10 watts complete all as specified and directed.

Supply & fixing and in repair ceiling rose, 3 terminal ,PVC/polycarbonate body ISI marked, complete all as specified and directed

Tube light fitting with universal batten suitable for T8 LED lamps LED 20W tube Rod with end cap complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including 20LED tube rod 4 feet long (Double Side Connection) fixed in repairs, complete all as specified and directed. Make:-Havells Cat Part No:-REGALBATTENT8UPTO1X22WSSBSWH for fittings & CRYSTAL 1213T8DSTL20WLED865SGLASS for LED tube rod or Equivalent cat part of make:-Wipro / Crompton / Bajaj / Philips. Note :- The LED batten and LED tube rod shall be of same make.

Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete incl testing after fixing all as specified and directed by Engr-in-Charge . The specification of the light fitting should meet the following. (a) Housing of light fitting: Aluminum Extruded. (b) Operating voltage: 150V to 270V. (c) Operating temperature: 10 to 45 degrees. (d) Lumen efficacy: 100 lumen per watt. (e) System lumen: Not less than 900 Lumens. (f) Colour temperature: Not less than 5700K. (g) Surge voltage protection: Up to 2 KV. (h) Ingress protection: IP20. (j) Total harmonic distortion: Not less than 20%. (k) Power factor: Not less than 0.90. (l) Input frequency: 50 HZ. (m) Line protection: Under/Over voltage protection. "Cat part No LL20-111-XXX-65-AL1 of Wipro, or its equivalent in Havells, GE, Oshram, Phillips”

Supply & fixing LED light fitting 1x9W bulk head luminaries IP 65 complete with all accessories including LED lamp 10 watt , connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V 50 Hz Cat part No LW07-141-XXX-57 G1 Make Wipro or equivalent in Phillips, Oshram, GE

Supply & fixing energy saving LED lamps 7 watt, 230 volts, 50 HZ , 0.95 PF. Make- Havell Cat part No LHLDERHEMD8X007 or equivalent of Make- Phillips, Crompton, Orient as approved.

Supply & fixing and in repairs sheet metal enclosure acrylic door 240 volts AC,SPN distribution board 12 way for flush mounting with 100amps copper busbar,neutral bar,earth bar suitable for MCB incomer of rating upto 100Amps ,MCB SPN/DP, and MCB SP as outgoing complete connecting cable links with top and bottom removable gland plates with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat all as specified and as directed. Make:- Legrand cat No. 5076 22 12 way / Hager Cat Part No.VYS12G / L&T Cat ref:-DBSPN008GD as approved.

Supply & fixing and in repair sheet metal enclosure acrylic door 240 volts AC,SPN distribution board 8 way for flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer of rating upto 100Amps ,MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat all as specified and as directed. Make:- Legrand cat Part No. 5076 21 8 way / Hager cat Part No.VYS08G / L&T Cat Part No:-DBSPN008GD as approved

Supply & fixing and in repair sheet metal enclosure acrylic door 240 volts AC,SPN distribution board 4 way suitable for flush mounting with 100amps copper busbar,neutral bar,earth bar and MCB incomer of rating upto 100Amps ,MCB SPN/DP, and MCB SP as outgoing and complete connecting cable links with top and bottom removable gland plate with IP 43 DBs protection and including making good the disturbed surfaces to match with existing surface and colour coat all as specified and as directed. Make:- Legrand cat No. 5076 21 8 way / Hager Cat Part No.VYS04G / L&T Cat Part No-DBSPN004GD as approved

Supply & fixing and in repair MCB SP 6 to 32 Amps 10 KA,"C" series,AC,240Volts,50Hz , ISI marked complete all as specified and directed.Make:- Legrand cat No.4085 87 to 4085 95 / Hager Cat Ref No.NCN106N to NCN132N / Havells Cat No.DHMGCSPF006-032 as approved

Supply & fixing and in repair MCB SPN 32 to 40 Amps 10 KA,"C" series,AC,240Volts,50Hz, ISI marked complete all as specified and directed.Make:- Legrand cat No.4086 17 to 4086 18/ Hager cat part No:- NCN232N /Havells cat part No.DHMGCSNF040 / L&T cat part NoBB20400C as approved

Supply & fixing sub main wiring in replacement complete with 2 run of 10 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLSH type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 10 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour code as required and applying putty including cutting and chiselling and complete all as specified and directed. Note : - Two run of 10 sqmm single core copper conductor cable and one run of 10 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as RM.

S&F Sub main wiring in replacement complete with 2 run of 6 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLSH type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 6 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour code and applying putty including cutting and chiselling and complete all as specified and directed. Note : - Two run of 6 sqmm single core copper conductor cable and one run of 6 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as RM.

S&F Sub main wiring in replacement complete with 2 run of 4 sqmm single core copper conductor (ISI marked)cable 1100 volts grade,FRLSH type, PVC insulated, unsheathed,flexible,multi stranded colour coded cables drawn through and including rigid PVC conduit of size 25 mm dia medium grade(MMS) with all connected accessories such as Bend,Tee,Elbow,Short peices etc concealed in wall/roofs/floors and including one run of 4 sqmm single core copper conductor cable flexible, PVC insulated, unsheathed, multistranded, 1100 volts grade,FRLSH type as earth continuity conductor connected to common earth dolly and including making good the disturbed surfaces to match with existing surface and colour code and applying putty including cutting and chiseling and complete all as specified and directed. Note : - Two run of 4 sqmm single core copper conductor cable and one run of 4 sqmm single core copper conductor cable as earth continuity and one run of PVC conduit shall be measured as RM.

Supply and fixing in repair Flush mounting sheet steel enclosure with metal clad plug and socket including MCB SP 20 Amps, 10KA 'C 'series, 230 Volts complete all as specified and directed.Make:- Legrand cat No.5078 11/ Hager cat part no.VYA120C / Havells Cat No.DHDPUSN020 / L&T Cat No.DBMPS220SD as approved.

Earthing complete with galvanised steel earth plate electrode 600mmX 600mmX 6mm thick buried directly in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45X 45X 45 CM,RCC cover 1:2:4 type B1 of size 45X45X6 CM with Reinforcement bars of 8mm dia @120mm c/c excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.

Taking down carefully ceiling fans at any height of any sweep/make/model after disconnecting electric connection and dismantling and opening the body of ceiling fan and examining for repairs including servicing,overhauling, greasing etc and cleaning the complete body both internal & external parts with cleaning agent and renewal of minor spare parts such as split pins,cater pins,coupling bolt, capacitor holder,terminal adoptor,screws,nuts,spring washers for blade/body etc and fixing of components/accessories such as ball bearings,gun metal bushes,capacitor,canopy top& bottom, shackle clip assembly and assembling of all parts including hanging and fixing back in existing location and connecting of electrical connections and testing for its satisfactory performance complete all as specified and directed. Note:- (i) Spare parts will be measured and paid separately under relevant item of schedule as supply only (ii) Rewinding of fan motor,painting will be measured and paid separetly under relevant item of schedule. (iii) Labour element for fixing of spare parts and removing old unserviceable items are deemed to be included in quoted rate

-Ditto- All as per item No.29 above,but exhaust fan of metal body 380mm sweep to 450 mm sweep.

-Ditto- All as per item No 29 above,but Air circulator wall mounted type 450 mm to 600 mm sweep including carrying out repairs to oscillation mechanism/speed regulation mechanism and making functional for satisfactory performance.

-Ditto- All as per item No.29 above,but for wall mounted fan 400 mm sweep including carrying out repairs to oscillation mechanism/speed regulation mechanism and making functional for satisfactory performance.

Supply only capacitor 2.5 mfd,240volts, 50Hz complete all as specified and directed.Make : Epcos/Universal/tipcon/CG/Concap/Havells as approved.

Supply only capacitor 3.15 mfd,240volts50Hz complete all as specified and directed.Make : Epcos/Universal/tipcon/CG/Havells as approved.

Supply only ball bearing Make:- SKF Cat No 6201/6202 or equivalent in NBC/NRB

Supply only ball bearing Make:- SKF Cat No 6203/6204 or equivalent in NBC/NRB

Supply only gun metal bush suitable for ceiling fan/Exhaust fan/Air circulator/wall mounted fan of any sweep/type as approved.

Supply only shackle clip assembly with rubber bush reel and nuts,bolts and washers suitable for ceiling fan of any sweep/type.

Supply and fixing down rod made of MS pipe medium grade 15mm dia of 600mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to down rod with two coat of synthetic enamel paint over one coat of red oxide primerall as specified and directed.

Supply and fixing in repairs down rod made of MS pipe medium grade 15mm dia of 900 mm long duly drilled holes both ends & slot with hole in other end suitable for fixing of ceiling fan of any sweep/type and painting to down rod with two coat of synthetic enamel paint over one coat of red oxide primer all as specified and directed.

Supply and fixing in repairs copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core 0.75 sqmm and including electric connection from ceiling fan to ceiling rose complete all as specified and directed.

Supply and fixing in repairs copper conductor cable, PVC insulated, sheathed,flexible, multistranded,ISI marked, 1100 volts grade 3 core ; 2.50 sqmm and including electric connection from electric appliences and ceiling rose/distribution board complete all as specified and directed.

Supply and fixing in repairs MS clamp made out of flat iron of size 25X6 mm including galvanised 'S' type hook, nuts, bolts and washers etc suitable for hanging of ceiling fan and painting including red oxide primer and one coat of synthetic enamel paint and nuts,bolts and washers etc complete all as specified and directed as approved.

Cutting the existing surface wall of brick/stone masonary and making round hole at any height suitable for fixing 300 to 450 mm sweep exhaust fan including providing nut,bolt and washers after grouting in PCC and including 3 mm dia 5cm apreature MS jali and proper wooden frame for to avoid insects fix at outer surface of wall and making good the disturbed surface area complete all as specified and directed.

Material and labour for painting to ceiling fan complete body, blades & down rod etc of any sweep/make/model with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation surfaces including marking of MES Number with black paint complete all as specified and directed directed. Make of paint:-Asian/Berger/Nerolac (Note:-Painting work to be carried out after dismantling of ceiling fan)

Material and labour for painting to exhaust fan complete body, blade assembly,frame etc of 300 mm to 450 mm any sweep /make/model with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation of surfaces including marking of MES Number with black paint complete all as specified and directed directed. Make of paint:-Asian/Berger/Nerolac (Note:-Painting work to be carried out after taking down of exhaust fan)

Material and labour for rewinding of ceiling fan motor of 1200mm sweep of any make/model/type with new super enamelled copper winding wire of similar gauge and number of turns as existing,including cleaning the motor properly and applying varnishing heating including removing burnt out copper winding wire from ceiling fan motor complete all as specified and directed.

Material and labour for rewinding of ceiling fan motor of 1400 mm sweep of any make/model/type with new super enamelled copper winding wire of similar gauge and number of turns as existing,including cleaning the motor properly and applying varnishing heating including removing burnt out copper winding wire from ceiling fan motor complete all as specified and directed.

Material and labour for rewinding of exhaust fan motor of 250mm sweep to 300 mm sweep of any make/model/type with new super enamelled copper winding wire of similar gauge and varnishing heating including removing burnt out copper winding wire complete all as specified and directed.

Material and labour for rewinding of exhaust fan motor of 380mm sweep to 450 mm sweep of any make/model/type with new supper enamelled copper winding wire of similar gauge and varnishing heating including removing burnt out copper winding wire complete all as specified and directed.

Material and labour for rewinding of air circulator fan motor 450 mm sweep to 600 mm sweep of any make/model/type with new supper enamelled copper winding wire of similar gauge and number of turns as existing,including cleaning the motor properly and applying varnishing heating including removing burnt out copper winding wire from air circulator fan motor complete all as specified and directed.

Taking down unserviceable storage type water heater (Geyser) 25 Ltrs capacity of any make/model/type from existing wall after disconnecting of electric and water supply connections and keeping the same in safe custody for carry out repairs/replacement of unserviceable spare parts & components such as heating element, thermostat,pilot lamps with wiring,insulating glass wool, thermal cut out,pressure release valve,safety valve,aperature plate assembly etc and exmine water tightness of inner storage tank after cleaning and renewal of rubber washer/gasket and nut,bolts and washers etc and adjust to required range of thermostat control and assembling all parts/ accessories including fixing back in same location after connecting up of water & electric connections and testing for its satisfatory functioning complete all as specified and directed. Note:- (i) Spares shall be measured and paid separately under relevant item of schedule as supply only (ii) Labour element for fixing of spare parts including assemblying and removing old unserviceable items are deemed to be included in quoted rate.

-Ditto- All as per item No.52 above, but of capacity 50 litre

Supply only heating element 1.5 KW, suitable for storage type water heater (As per sample) Make:-Hot max/Bajaj/Crompton/Remson/ Havells as approved.

Supply only heating element of 2.0 KW, suitable for storage type water heater (As per sample) Make:-Hot max/Bajaj/Crompton/ Havells as approved.

Supply only thermostat suitable for storage type/instant water heater (geyser) of any type/ capacity

Supply only thermal cut out suitable for storage type/instant type water heater (geysers) of any type/ capacity as existing and as approved.

Supply only aperature plate assembly suitable for storage type water heater (geyser) 25 litre capacity complete all as specified and directed

Supply only aperature plate assembly suitable for storage type water heater (geyser) 50 litre capacity complete all as specified and directed

Supply only copper inner tank suitable for storage type wateer heater (geyser) 25 litre capacity as approved.

Supply only copper inner tank suitable for storage type water heater (geyser) 50 litre capacity as approved.

Supply only geyser indicator pilot lamps(red and green lamps) with wiring round/square/rectangle suitable for geysers of any type as approved.

Supply and fixing PVC connection pipe15 mm dia, 450mm long with end nuts and washer, suitable for hot water outlet of geyser inlcuding removing old unserviceable item complete all as specified and directed.

Supply and fixing PVC connection pipe15 mm dia, 600 mm long with end nuts and washer suitable for hot water outlet of geyser inlcuding removing old unserviceable item complete all as specified and directed.

Supply and fixing PVC connection pipe15 mm dia, 450mm long with end nuts and washer suitable for cold water inlet of geyser inlcuding removing old unserviceable item complete all as specified and directed.

Supply and fixing PVC connection pipe15 mm dia, 600 mm long with end nuts and washer suitable for cold water inlet of geyser inlcuding removing old unserviceable item complete all as specified and directed.

Material and labour for painting to storage type water heater(Geyser) of capacity 25 litre of any make/type to complete external body with two coat of synthetic enamel paint by using electric spray machine similar to match with existing colour after preparation of surfaces including marking MES Number with black paint complete all as specified and directed directed.Make of paint:-Asian/Berger/Nerolac (Note:-Painting work to be carried out after taking down of storage type water heater(geyser) as directed.

-Ditto- All as per item No 67 above but of capacity 50 litre

Supply & fixing fan regulator piano type electronic, stepped type, 240Volts,AC,ISI marked and including removing old unserviceable item complete all as specified and directed.

Material & Labour for Removing the burnt/defective sealed compressor unit of any make from Window type of air conditioner capacity 1.5Ton by cutting of suction and discharge lines and un-screwing the foundation nuts, supply and fixing of new sealed compressor unit as per existing make - Tecumseh Kirloskar, Model RNB 5521 of rotary compressor by tightening the foundation nuts with new fittings and connecting suction and discharge lines with gas welding work complete all as specified and directed.

-Ditto- All as per item No 70 hereinbefore above but Air conditioner of 2 ton capacity and sealed compressor unit Make - Tecumseh Kirloskar, Model RNB 5529 complete all as specified and directed.

Testing and Repairing leakage in system Air conditioner of 1.5 ton capacity by injecting nitrogen gas upto 300 PSi, repairing leaking spots/joints with gas welding including supply & fixing of filter pencil type copper (in replacement), cleaning & flushing out complete system with gas, making the system leak proof, vaccumising the system and supply & charging refrigerant gas F-22 (approx 1.90 Kg) complete all as specified and directed.

-Ditto- All as per item No 72 hereinbefore above but Air conditioner of 2 ton capacity complete all as specified and directed. gas F-22 (approx 2.30 Kg) complete.

Supply & fixing in replacement of electric blower motor capacity 1/7 HP SP 230V, 50Hz, 930/875/825/775 RPM for window type Air conditioner including testing etc complete Make : Gulmarg/GE Motor/Crompton Greaves as per existing make as approved complete all as specified and directed .

Supply & fixing in replacement of electric blower motor capacity 1/5 HP SP 230V, 50Hz, 930 RPM for window type Air conditioner including testing etc complete Make : Gulmarg/GE Motor/Crompton Greaves as per existing make as approved complete all as specified and directed

Supply & fixing in replacement thermostat for window type AC, working on SP, 230V,AC Make : Indfos/ Ranutrol as per existing make as approved, complete all as specified and directed

Supply & fixing in replacement of PCB circuit with remote control for air conditioner of any Make and capacity as per existing make as approved complete all as specified and directed . Make : Voltas/Carrier/Ranutrol/LG/Blue star

Supply & fixing in replacement air filter washable of Nilon mesh suitable for window type air conditioner complete all as specified and directed as per existing make as approved

Supply & fixing in replacement starting capacitor 100 to 120 MFD, 440 volts AC ( Suitable for 1.5 TR window type AC) complete all as specified and directed.

Supply & fixing in replacement running capacitor 36/45 MFD, 440 volts AC ( Suitable for 1.5 TR window AC) complete all as specified and directed as per existing make as approved

Supply & fixing in replacement capacitor 6 MFD, 440 volts AC ( Suitable for fan motor) complete all as specified and directed as per existing make as approved.

Supply & fixing in replacement relay box type model-KCH 5230004 as per existing make as approved Make : Usha/Arvind/Voltas

Supply and fixing of copper filter pencil type of any make and capacity of air conditioner complete Make as per existing and as approved complete all as specified and directed.

Supply & fixing in repair front grill of PVC for window type AC of any make complete all as specified and directed all as per existing grill as approved.

Supply and fixing relay over load protector complete set suitable for AC as per existing as approved complete all as specified and directed.

Supply & fixing in replacement relay box type model-AC85004 /AC 85001 operating on SP 230 Volt, AC, Make : Usha/Arvind/Voltas as approved.

Supply & fixing in replacement cable PVC flexible copper conductor 3 core heavy duty 4.0 Sqmm complete all as specified and directed. Make : Plaza/Finolex/ ISI mark as approved.

Supply and charging of gas Freon - 22 in AC plant of any capacity Note:- Gas will be accepted in sealed and tested cylender having weight of gas 13.6 Kg in each cylender.

Supply & fixing in repairs Sheet metal enclosure with earth plug and socket single pole and neutral with single pole MCB 20 Amps 240 volts complete all as directed. Make:- HAVELL's/ L&T as approved.

Supply & fixing in repairs Metal clad plug, 2 pole with earth terminal capacity 20 Amp fixed in existing single pole and neutral enclosure complete all as specified and approved.

Supply & fixing in repairs Metal clad socket, 2 pole with earth terminal capacity 20 Amp, fixed in existing single pole and neutral enclosure complete all as specified and approved.

Supply & fixing in repairs Plug top, 3 pin, 15 Amp, SP, 230V, fixed in repairs complete all as specified and approved.

DESERT COOLERS Supply & fixing in replacement fan motor assembly of 1/7HP, 230V SP, AC complete clamps=04 Nos and water fan 18" sweep Make GE Motors/Crompton/ISI Mark complete all as specified and directed.

Supply & fixing in replacement vertical pump/Water immersed pump complete tube operated on SP 230V AC Make : Crompton/cool- Home/GE Motors/ISI Marked complete all as specified and directed.

Supply & fixing in replacement wood-wool pad complete heavy size (set of three pads) Approx wt 400 Gms complete all as specified and directed .

Supply & fixing in replacement capacitor 6 MFD, 440V, Make - Havells/Empire/ EPCOS/ Capro/ Asian or ISI Mark complete all as specified and directed.

Material & Labour Scrapping down the complete existing paint inside and out side of desert cooler cleaning the surface and applying two coat of synthetic enamel paint over and including one coat of red oxide primer with sprayer and writing SM/MES No with white black enamel paint complete all as specified and directed .

WATER COOLERS Supply, fixing & testing of blower motor for water cooler SP 230V 50 Hz AC 1/12 HP 930 RPM with fan of size 12.5" dia complete etc as per existing make as approved complete all as specified and directed

-Ditto- All as per item No-99 but 1/20 HP 1350 RPM with fan of 13" dia complete all as specified and directed.

-Ditto-All as per item No-99 but 1/35 HP, 1350 RPM with fan of 10" dia complete all as specified and directed

-Ditto-All as per item -99 above but 1/83 HP 1350 RPM and fan of 9" dia complete all as specified and directed.

Supply & fixing in replacement starting capacitor 40 to 60 MFD, 275 volts Make- Sharda/Empire/Bhel/Havells as approved etc complete all as specified and directed.

-Ditto- All as per item No-103 above but of 60 to 80 MFD complete all as specified and directed.

Supply & fixing in repairs running capacitor 10 MFD 440 volts AC Make: EPCOS/ Capro /Asian etc complete all as specified and directed.

-Ditto- All as per item No 105 but of 15MFD complete all as specified and directed.

-Ditto-All as per item No 105 but of 25/30 MFD complete all as specified and directed.

Supply & fixing in replacement thermostat for water cooler up to 150 ltr capacity. Make : Ranutrol/Danfoss/Indfos as per existing make and as approved complete all as specified and directed.

Supply & fixing in replacement push cock heavy duty brass Chromium plated 15mm bore (to match with existing defective push cock) ISI marked as approved. complete all as specified and directed.

Supply and fixing of float valve 15mm bore of PVC rigid type with polythene ball complete all as directed as approved complete all as specified and directed.

Material & Labour for Scrapping down the existing paint of water cooler of any make & capacity 150 ltrs cleaning and preparing the surface with necessary putty work and painting the complete body of Water cooler with foundation frame of compressor, condenser etc with one coat of synthetic enamel paint over and including a coat of red oxide primer with spray painting and writing SM/MES No with white/black paint all as directed.

Supply and fixing starting Relay current type suitable for compressor model= AE 4440M, KCE 443 HAA, CAJ, 34, CAJ 2612M, AE451E, KCE 461 HAE , 513HAE complete, Make-Kirloskar/Tecumseh/ Usha / Arvind as approved.

Supply and fixing in repairs of over load protector for compressor of water cooler complete as approved and all as specified and directed.

Supply and fixing of copper filter pencil type to any make and capacity of water cooler etc complete as per existing make and as approved all as specified and directed.

Supply and fixing in replacement of capillary tubing having 0.050/0.055 bore complete make as approved complete all as specified and directed.

Supply & fixing in replacement rubber hose pipe of 20mm size with clip for outlet tray of water cooler approx 1.5Mtr long complete all as specified and directed.

Material and Labour for Removing the burnt/defective sealed compressor unit of any make from water cooler cap 60 ltr/hr By cutting of suction and discharge lines and un-screwing the foundation nuts supply and fixing of new sealed compressor unit make : Kirloskar/Emmerson model : AE 444M or KCE 444 HAA/CAJ34 as per existing make and as approved by tightening foundation nuts with new fittings and connecting suction and discharge line with gas welding work etc complete all as directed.

-Ditto- All as per item No 117 above but water cooler capacity 80 ltr/hr and S&F compressor Make : Kirloskar/Emmerson Model : CAJ 2612M/AE451E/KCE 461 as per existing requirement as approved complete all as directed.

-Ditto- All as per item No 117 but water cooler capacity 150-150 ltr/hr and S&F compressor Make : Kirloskar/Emmerson Model AHR-13/KCJ 513 as per existing requirement as approved complete all as specified and directed.

Supply & fixing in replacement cable PVC 3 core flexible heavy duty copper 2.5 Sqmm complete all as specified and directed.

Repairing Testing the leakage in system by charging of Nitrogen Gas up to 300 PSI. Repairing of leakage spots/Joints with gas welding work, cleaning and flushing the complete water cooler with gas, making the system leak proof, vacuuming the complete system, supply and charging of Freon-22 Gas approx 1.6 Kg complete for water cooler 40/60/120 ltr capacity as per existing requirement as approved complete all as specified and directed.

Material and Labour Dismantling of water cooler of any capacity and taking out complete internal assembly ie. Inner tank, inlet and out let connection etc and descaling with chemical agent including cleaning and washing and reassembling with same position and making the tank leak proof by necessary brazing/welding work with gasket all as directed.

Material and Labour Replacement of water cooler inner tank made of stainless steel as per existing capacity (80 Ltrs) & size with necessary gaskets complete set with drilling work fixing with nut,bolts & washer etc complete all as specified and directed.

All as per item No 123 but 150 Ltrs. complete all as specified and directed.

Material and Labour Replacement of glass wool in 40/60/80/120 ltrs capacity water coolers by taking out inner outer tank including approval complete all as specified and directed.

Repairing of bottom base and legs of water cooler by suitable welding work complete all as specified and directed.

DEEP FREEZER Material and Labour Testing the leakage in system by charging Nitrogen Gas up to 300 PSI. Repairing the leakage spots/Joints with welding work including supply and replacement of filter pencil type copper and capillary tube of existing dia & length. Making the system leakproof vacuuming the system and charging of Gas 134a approx 1.0 Kg and testing complete all as specified and directed.

Supply & fixing in replacement of Relay current type and over load protector complete set suitable for compressor Model KCE 336 & KCE 345/2415 complete all as specified and directed as per existing requirement and as approved.

Supply & fixing in replacement of thermostat Auto defrost type complete for Deep freezer (Refrigeration of)any make & capacity as per existing requirement and as approved.

Material and Labour Removing burnt/defective sealed compressor unit from deep freezer of any make by cutting of suction and discharge lines and un-screwing of foundation nuts. Supply and replacing of new sealed compressor unit Make : Kirloskar Model :KCS 410 LAA/KCS 412 LAG/Tecumseh 2415 as per existing including necessary gas welding making the system leak proof, testing and tightening the foundation nuts with new grounts and connecting suction and discharge line with gas welding work etc complete all as directed.

-Ditto- All as per item No 130 but compressor Make-Tecumseh Model TSK-1350 complete all as specified and directed.

Supply and fixing in repairs relay current type and over load protector complete set suitable for compressor model No KCS 410 LAA or KCS 412 LAG as per existing and as approved complete all as specified and directed.

Supply & fixing in replacement of drier filter complete set suitable for deep freezer 215 / 386 ltrs as approved complete all as specified and directed.

Supply, fixing & testing of blower motor for Deep freezer SP 230V 20 watts complete with fan complete all as specified and directed

REFRIGERATOR Supply and fixing Relay current type and overload protector complete suitable for compressor model KCE336, KCE345 fixed in repairs as per existing requirement and as approved complete all as specified and directed.

Supply and fixing in repairs Thermostat auto defrost type for refrigerators any make & capacity 165/310 Ltr Rerfrigerator complete all as specified and directed. MAKE : Danfos/Ind foss/Ranutrol as per existing requirement and as approved.

Supply for Vegitable tray as per sample and suitable for refrigerator Make Godrej, Voltas or whirlpool , LG of capacity 300 Ltr as approved.

Supply and fixing Evaporator suitable for Voltas/Godrej refrigerators capacity fixed in repairs 286/300 ltr complete all as specified and directed as approved.

Material and Labour for removing burnt/defective sealed compressor unit of any make from any type/Capacity (165/286/300/310 Ltr) of refrigerator by cutting of suction and discharge lines and un-screwing of foundation nuts and supply & fixing new sealed compressor unit Make Tecumesh, Godrej, Voltas or whirlpool , LG, as per existing requirement and as approved including necessary gas welding, making the system leak proof, including Repair to leakage in system by charging of nitrogen gas upto 300PSI, in the refrigeration system, testing and tracing the leakage in system, arresting the leakage with gas welding etc and making the complete system leak proof, vaccumising the system and testing, the system for smooth functioning complete and charging of refrigerent gas 134A complete all as specified and directed.

Supply and charging of gas Freon- 134-A complete all approved as specified and directed. Note:- Gas will be accepted in sealed and tested cylinder having capacity 10 Kg each.

VOLTAGE STABLIZER Taking out of defective / burnt stablizer from verious locations of capacity from 1 KVA to 5 KVA single phase and replacement of the following defective parts and testing complete all as specified and directed.

Terminal strip

Push button switch

Rocker switch

Circuit card from 3 to 5 KVA

Circuit card from 1 to 2 KVA

Relay 24 Volts 250 Ohms for 3 to 5 KVA

Volt meter 0-300 volts size as per sample

Indicator lamp (red/green)

Dismantling and taking down Aluminium strip fixed on roof, floor wall and taking out old saddles and earthing strip all as specified and directed.

Aluminium strip obtained from Item Ser No 142 ,making it serviceable strip (afrer removed/avoided bends and foldings of aluminium strip) and the same refixing on new PVC saddles and connecting to earthing strip in original state all as specified and directed.

Supply and fixing aluminium strip 25x3 mm to be fixed on PVC insulators with fixing screws on roof, wall including down conductors strip etc, and taking down of old aluminum conductor srtip from any position and places all as specified and directed.

Supply and fixing in replacement PVC insulator along with screws, accessories on wall, roof etc suitable for fixing aluminium strip of size 25x3 mm complete including taking down on old unsv insulators complete all as specified and as directed.

Supply and fixing in replacement air termination single pointed aluminium rod 12 mm dia, 300 mm long fixed complete as specified and directed. Note : (i) Cost of minor job and spares required for fixing of aluminium rod on PCC block & for fixing Aluminium strip to rod is deemed to be included in the quoted rate. (ii) Cost of PCC block will be measured and paid separately.

Supply and fixing in replacement test point terminal block made of Gun Metal or phosphrus bronze of size 75 x 75 x 25 mm drilled & screwed including 03 Nos 8mm dia 25mm long hexagonal head screw all as specified and directed.

Supply and fixing in replacement galvanized iron strip of size 32x 6 mm to be fixed on wall or to be laid in ground , complete all as specified and as directed.

Repair including taking out old damaged parts of earth pit PCC chamber with cover and M& L for preparation of new PCC chamber in cement concrete 1:2:4 type B1 costing cover duly reinforced with XPM (weight not less than 4 Kg/sqm and CI frame and other provisions all as shown electrical plate No-3 of SSR-2009 Part-I complete all as specified and directed.

Material and Labour including replacement of GI tubes light grade, 40 mm dia for protection of earth continuity leads as approved.

Material and Labour for plain cement concerete 1:2:4 type B1 (Using 20mm graded crushed stone aggregate) as in Making PCC Block 300x300x300 mm including use and waste of formwork complete all as specified and directed.

M/S MOOL RAJ SHARMA

M/s K K CONSTRUCTION

THAPA TRADERS

Jiwan Singh

M/s Mool Raj Romesh Chander

M/S SOHUM ENGINEERS

DARVESH ENGINEERING WORKS