Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹32.5 LAdmitted-Finance | +3.11% | ₹32.5 L | L1 | Admitted-Finance |
| 2 | L2₹33.1 L+₹56,422.51 (1.74%)Admitted-Finance | +4.90% | ₹33.1 L+₹56,422.51 (1.74%) | L2 | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹63,042
Closing Date
29 Jul 2026, 4:00 pmClosed
Er. Balbir Singh, Executive Engineer (E)BM-I
3rd Floor Mohan Singh Place BKS Marg Connaught Place New Delhi
As per NIT
2026_NDMC_295702_1
NIT No. 30/EE(BM-I)E/2026-27
Open Tender
Electrical Works
Works
45 days
at Palika Bazaar Shopping Complex New Delhi
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹63,042
4 Aug 2026
21 Jul 2026
29 Jul 2026
21 Jul 2026
29 Jul 2026
21 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Dismantling of existing 25,000 CFM Air Handling Unit (AHU) by carefully removing the AHU body panels, motor, blower assembly and all associated components, taking out the existing cooling coil from the AHU and removing the dismantled material from site, and providing, supplying, installing, testing and commissioning of a factory-built chilled water (CHW) cooling coil section of size 1778 mm x
1778 mm, 4 Row (4RD), complete with aluminium finned copper tubes, MS headers, 1/2" dia copper tubes, aluminium fins having 10–12 fins per inch, copper tube thickness not less than 0.41 mm and GI casing, including transportation, handling, positioning, refitting and reassembly of the AHU body, motor, blower and all accessories, alignment of all components, replacement of minor consumables required for installation, testing, trial run and commissioning of the complete AHU to ensure satisfactory performance, leak-free operation and making the unit fully functional as per site requirements and to the satisfaction of the Engineer-in-Charge.. | 1 | Per Job | 4,75,000 | ₹4,75,000 |
| 2 | Dismantling of existing 10,000 CFM Air Handling
Unit (AHU) by carefully removing the AHU body panels, motor, blower assembly and all associated
components, taking out the existing cooling coil
from the AHU and removing the dismantled material
from site, and providing, supplying, installing,
testing and commissioning of a factory-built chilled
water (CHW) cooling coil section of size 1080 mm x
1778 mm, 4 Row (4RD), complete with aluminium
finned copper tubes, MS headers, 1/2" dia copper
tubes, aluminium fins having 10–12 fins per inch,
copper tube thickness not less than 0.41 mm and
GI casing, including transportation, handling,
positioning, refitting and reassembly of the AHU
body, motor, blower and all accessories, alignment
of all components, replacement of minor
consumables required for installation, testing, trial
run and commissioning of the complete AHU to
ensure satisfactory performance, leak-free operation and making the unit fully functional as per site requirements and to the satisfaction of the Engineer-in-Charge. | 1 | Per Job | 3,50,000 | ₹3,50,000 |
| 3 | SITC of 80mm BUTTERFLY VALVE (MANUAL) with CI body SS Disc, Nitrile Rubber Seal &O-Ring PN 16 pressure rating for chilled water circulation | 2 | Nos. | 8,000 | ₹16,000 |
| 4 | SITC of 65mm BUTTERFLY VALVE (MANUAL) with CI body SS Disc, Nitrile Rubber Seal &O-Ring PN 16 pressure rating for chilled water circulation | 2 | Nos. | 6,000 | ₹12,000 |
| 5 | SITC of 80mm Y-STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled water circulation including insulation etc as complete as required. | 1 | Nos. | 20,000 | ₹20,000 |
| 6 | SITC of 65mm Y-STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled water circulation including etc as complete as required. | 1 | Nos. | 15,000 | ₹15,000 |
| 7 | SITC of 80mm balancing valve with built in measuring facility with CI body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN16 pressure rating for chilled/hot water circulation
Etc as required. | 1 | Nos. | 35,000 | ₹35,000 |
| 8 | SITC of 65mm balancing valve with built in measuring facility with CI body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN16 pressure rating for chilled/hot water circulation
Etc as required. | 1 | Nos. | 25,000 | ₹25,000 |
| 9 | SITC of filter frame section made of MS angle iron of size 40x40x4mm section of below size for AHU’s with locking arrangement complete as per site requirement. 25,000 CFM (2mtr x 2 mtr) | 1 | Nos. | 22,000 | ₹22,000 |
| 9.2 | 10,000 CFM (2mtr x 1.2mtr) | 1 | Nos. | 15,000 | ₹15,000 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.22 MB
BOQ_393443.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .