Construction of Extra Class Rooms on the First Floor of Innovation Incubation Lab at Govt. Degree College Poonch Electrical Part

Wiring for light point\fan point\call bell point with 1.5 sq. mm. FRLS PVC insulated copper conductor singel core casbel in furface \recessed medum class pvc conduit with modular switch , modular plate, suitable G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper comnductor singel cabel etc as req.

Wiring for light\power plug with 2x4 sq. mm FRLS PVC insulated copper conductor singel core cabel in surface\recessed medum class PVC conduit aslong with 1 no. 4 sq. mm. PVC FRLS insulated copper conductor singel core cabel in for loop earthing as req.

Wiring for cicuit/ submain wirring alongwith earth wire with the following size of FRLS PVC insulated copper conductor 'singel core cabel in surfacr/ recessed medum class PVC conduit as req

2x1.5 sq. mm +1x1. sq.mm earth wire

2x2.5 sq.mm+1x2.5sq.mm earth wire

2x4.0sq.mm +1x 4.0 sq. mm rarth wire

4X10 sq mm+2x 6.0 sq.mm earth wire

Supply and drawing following size of FRLS PVC insulated copper conductor 'singel core cabel in surfacr/ recessed medum class PVC conduit as req.1x1.5 sq. Mm

Supply and fixing of follo following size medum class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed comduit as req.25 mm

Supply and fixing following modular switch/socket on the exisitying modular plate & switch box including connections but excluding modular plste etc. as req

5/6 amp switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supply and fixing two module steped type electronic fan regulator on exisiting modular plate switch box including connection bu excluding modular plate etc as req.

Supply and fixing modular blanking plate on existing modular plate &switch box excluding switch box etc. as,req.

Supply and fixing suitable G.I.box with modular plate and cover in front of surface or in recess, includijng providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch,connection etc as req.

Supply and fixing suitable G.I.box with modular plate and cover in front of surface or in recess, includijng providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and15/16 A modular switch,connection ,painting,etc as req

Supply and fixing suiutable size of GI box with modular plate and cover in forent of surface or in recess,including providing and fixing 2 nos. 5/6 A modular socket outlet and 2 nos. 5/6 A modular swuitch, ,connection etc as rwq. (for light plug to be used in non residential buldings)

Supply and fixing following size/module GI. box alongwith modular base & cover plate for modular switches in recessed etc.as req.

1 or 2 module (75 mmx75mm)

3 module (100mmx75mm)

8 module(125mmx125mm)

Supply and fixing following way,horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V. on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, intreconnection, powder painted including earting etc. as req. ( but without MCB/RCCB/isolator)

8 way(4 +24) Double Door

Supply and fixing 5 A to 32 A rating, 240/415 V, 10 KA, ''C'' curve ,miniature circuit breaker suitable for inductive load of following pole in exisiting MCB DB complete with connection, teasting and commessoning etc. as req.

Single pole

Single pole and neutral

Supply and fixing rating, four pole 415 V isolator exisiting MCB DB complete with connection, teasting and commessoning etc. as req.100 A

Supply and fixing of following electrical items as req

Fan Box

Fan sheet

A/B holder

LED lamp 9 watt

Deep box

Wall Fan 300 mm

Earthing with GI Earth pipe 4.5 mtr long 40mm dia including acessories andproviding mesonery enclouser with cover plate hasving locking arrangment and watering pipe (but wthout charcool/salt) etc as req.

Supply,Installation , Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal(Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies,shackle kit, safety rope, copper winding, steel/Al body power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, remote (preferably mobile app based) for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required.1200mm, service value ≥ 6.0 CM/Min/Watt, air delivery 150 CM/Min (Minimum)

Providing and fixing of IP-20 Recessde/ surface mounted round / sqaure SMD mid power (12-15 watt)LED Downlight with power coated die-cast alum. housing with UV stabilized non yellowish Diffuser withBIS complience 2.5 KV surg protected isolated driver, with short and open circuit protection .having efficiency .85% system lumin efficacy of ≥110 lm/ Watt,THD< 10%, PF ≥ 0.95, Cri.80, life time of minimum 50000 Burning Hours with 70% of intial Lumen maintained till life ends, CCT 3000°K/4000°K/ 5700°k/6000°/6500°K(A per ANSI Bin) , maximum power consumption should not more then the specified rating and fixture shell be of BIS standard and teade mark certificate (T.C) Manufacture word Mark / Name Engraved /Embossing/Screen Printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 &Lm80) certificate /report from OEM shall be submitted. all as per approved by EIC.

Providing and fixing of Lk08, IP 66 procteted LED street light luminaire on exisiting beracket /pole fixture made of powdeer coated single peice presure die cast alum. metrial with heat dissipation fines of housng with UV cover /Toughend glass cover and secondery lens of each led 7 shuld be SMD type of 3 to 5 watt eachthe system efficacy >=125 Lm/watt and poted driver 7 hass unique BIS R nunber with input voltage AC 120 to 270 V AC with high voltage cutoff@>= 300V and auto resetting safety PF. >0.95 druiver efficiefency>85% Led street light fixture with minimum lumen output 1500 lm. (90 Watt)

Providing and fixing of IP-20 SMD mid powerLED batten type integrted light fixture made from power coatedExtruded alum. housing with in built driver, complience 2.5 KV surg protected isolated driver, with short and open circuit protection .having efficiency .85% system lumin efficacy of ≥110 lm/ Watt,THD< 10%, PF ≥ 0.95, Cri.80, life time of minimum 50000 Burning Hours with 70% of intial Lumen maintained till life ends, CCT 3000°K/4000°K/5700°k/6000°/6500°K(A per ANSI Bin) , maximum power consumption should not more then the specified rating and fixture shell be of BIS standard and teade mark certificate (T.C) Manufacture word Mark / Name Engraved/Embossing/Screen Printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 &Lm80) certificate /report from OEM shall be submitted. all as per approved by EIC. 20/22 Watt LED 4 feet with min. lumen output (2000-2200) lm