Construction of KitchenShed Cum Store Room at Isugupatti PUES in Isugupatti Panchayat

Construction of Kitchen Shed Cum Store room @ Isugupatti PUE School in Isugupatti Panchayat

Earth work excavation and depositing on bank with initial lead and lift in cll clauses of soils such as as per S.S.20B for narrow foundation etc. complete.

Filling the Excavated Earth including cost and conveyance of all materials to site and all labour charges etc., complete.

Filling with M.Sand including cost and conveyance of all materials to site and all labour charges etc., complete.

Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost and conveyance of all materials to site and all labour charges etc., complete.

R.C.C. 1:1.5:3 mix using 20mm ISS HBG metal including cost and conveyance of all materials to work site and all labour charges etc., complete.

Brick work with Cement Mortar 1:5 Mix using Country Bricks including cost and conveyance of all materials to site and all labour charges etc., complete.

Cost and supply of steel with fabrication charges including cost of steel and binding wire complete with standard specification etc., complete

Supplying and errecting Centering for sides and soffixs of all RCC works including cost and conveyance of all materials to site and all labour charges etc., complete.

Below Sill Level

Above Sill Level

Supplying and applying of two coats of putty of 3mm thick over the exposed RCC surface of ceiling including finishing the joints smoothy with grinding machine and the surface shall be thoroughly cleaned out of dust and scrubbing. The Surface shall then be allowed to dry for atleast 48 hours. It shall then be sand papered (waterproof abrasive sheet) to give a smooth and even surface. Any unevenness shall be made good by applying 1st coat of putty mixed with water on the entire surface including filling up the undulations and applying 2nd coat of putty after 6 hours of 1st coat of putty and then sand papering (waterproof abrasive sheet) the same after it is dry and finishing the surface smoothly, etc., complete

Special Ceiling Plastering with cement mortor 1:3 mix to 10mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete

Plastering with cement mortor 1:5 mix to 12mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone M.Sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone M.Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers

Cost and supply of steel door of size 0.90 x 2.10 m including cost and conveyance of materials to work site and all labour charges etc.complete

Cost and supply of steel window of size 0.90 x 1.30 m including cost and conveyance of materials to work site and all labour charges etc.complete.

Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mmthick cement mortar 1:3 (One Cement and Three M.Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification

White washing two coats using shell lime including cost and conveyance of all materials to site and all labour charges etc complete.

Distembering two coats including cost of lime blue powder, fevicol type gums, brushes, scaffolding charges etc., complete with standard specification.

Emulsion Painting including cost of lime blue powder, fevicol type gums, brushes, scaffolding charges etc., complete with standard specification.

Painting in two coats using ready mixed enamel paint including all cost and labour charges etc., complete

Wiring with 2x1.5 sqm (22/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box with with 5A. F.T. sqitch inflush with wall, covered with hylem sheet of sheet of 3mm thick with painting of suitable colour of open PVC Light POINT / FAN POINT including all charges etc., complete.

Supply and Fixing of 11 W CFL in the existing light point

Supply and run of 2 of 1.5 sqmm (22/0.3) PVC insulated SC unsheathed Cu. conductor of 1100V grade on 7/20 GI bearer wire for service connection mains (SD 64)

Supplying and fixing fine polished cuddapah slab of Cost of 20 / 30mm thick cupboard arrangements including laying to correct alignment with necessary cement, mortar and black powder etc, complete complying with standard specification and as direct.

GST Amount for providing Service to Government Contract Works for the above Construction & Maintenance Works. { GST Amount is the Total GST Amount for overall quoted amount (Both Construction and Maintenance) above this row in column "BB" for all works in this package} (Refer Clause 1 & 27 of Section 2 of Instruction to Bidders (ITB) of SBD)

Please Enable Macros to View BoQ information