SPECIAL REPAIR/RENOVATION OF 08 UNITS OF STAFF QTRS OF KENDRIYA VIDYALAYA AT AF STN DARBHANGA UNDER GE (AF) BIHTA

Amount

Taking down chowkats with shutter (without taking off shutters from the frames) exc 1.5 sqmbut n exc 4 sm each, complete all as specified and directed.

Taking down chowkats with shutter (without taking off shutters from the frames) not exc 1.5 sqm each, complete all as specified and directed.

Taking down cement plaster any description/thickness on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Demolition of cement concrete (reinforced) such as roofs, floors (other than ground floors), beams, stair cases, landing, chhajjas and other similar works and removing rubbish from premises, complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and pavings n.exc 15 cm thickness (below or above GL), complete all as specified and directed.

Demolition of cement concrete (Unreinforced) of any discription and in any position not other wise specifically provided for, complete as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises, complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down steel tubing 25 mm bore and connections including cleaning for refixing or removal to store, complete all as specified and directed.

M&L brick work with old size sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in CM 1:6, complete all as specified and directed.

M&L for Mild Steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending,spirally for hoping for columns, hooking end and binding with and incl mild steel wire (annealead) not less than 0.9mm dia, complete all as specified and directed.

M&L for RCC 1:1.5:3 type A-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landing balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping), incl fair finish surfaces, complete all as specified and directed.

Formwork to edges of concrete flats, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls horizontal or sloping and similar work exc 10 cm but n exc 20 cm wide, for fair finished surfaces complete all as specified and directed.

M&L for 15 mm thick rendering on fair faces of brick/concrete surfaces in CM 1:4 with using WPC as per manufacturer's instructions, finishing surfaces even and smooth without using extra cement, complete all as specified and directed. (Note: WPC shall be measured and paid separately under appropriate item.)

M&L for rendering 15 mm thick on other than fair faces of brick work or stone masonry surface in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L rendering 5 mm thick in CM 1:3 on concrete surfaces of ceiling, finished even and smooth without using extra cement, complete all as specified and directed.

M&L grouting 25mm thick under stanchion bases or grillages etc including any temporary shuttering to edges with cement mortar 1:2, complete all as specified and directed.

M&L applying three coats of white wash after preparation of new/old plastered surfaces of ceiling, complete all as specified and directed.

M&L for 3mm thick rendering in CM 1:2 as in floating/setting coat as in skirting, trowelled to even and smooth finish, complete all as speciifed and directed.

M&L for finishing walls with premium Acrylic smooth exterior paint with silcone additives of required shade (Two or more coat applied @ 1.43ltr/10Sqm over and including priming coat of exterior primer applied @ 2.20kg/10 sqm, complete all as specified and directed.

M&L for Prepration of plastered of walls and applying two or more coat of distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/ltr of approved manufacturer of required shade and colour complete as per manufacturer's specifications, applied over and including a layer of wall care putty of 2mm thickness finished thoroughly smooth, complete all specified ad as directed by Engr-in Charge

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc, complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6 type C-2, using 40 mm graded stone aggregate, as in sub base of floors etc, complete all as specified and directed.

M&L 15 mm thick screed bed or bedding layer in CM (1:6) for laying floor finishes, complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring 15 to 20 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing, complete all as specified and directed.

M&L for machine cut kota stone slab as in skirting, dado, risers etc, 15 to 20 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing, complete all as specified and directed.

M&L PCC 1:4:8 type D-2, using 40 mm graded stone aggregate, as in foundation, filling, mass concreting etc, complete all as specified and directed.

M&L chequered cement concrete tiles 20 cm x 20 cm by 25 mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments as in floors, complete all as specified and directed.

M&L for joint free Non-Skid ceramic coloured tiles 7 to 8 mm thick area of each tiles exc 0.18sqm but not exc 0.38 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and directed.

M&L for rendering 10 mm thick in cement mortar 1:4 on brick work incl finishes the surfaces even and rough to receive tiles, complete all as specified and directed.

M&L for joint free Glazed ceramic coloured tiles in vertical surfaces 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.

S&F Powder coated (thickness of powder coating minimum 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 No.) suitable handle (1 No), complete all as specified and directed.

S&F 4 mm thick figured glass, pin head type and to be fixed in aluminium frame work etc, complete n exc 0.5 sq. m in each pane, complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

M&L for roof sheets stays, window guard bars, plain let in and fixed independently in wooden frames L or T section support for shelves etc., and similar articles conforming to Fe 410-0 or Fe 310-0.

M&L for 2nd class hard wood (Sal) plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid, rounded or chamfered put together with glue, pinned at joints, supplied and fixed, complete all as specified and directed.

M&L for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F 35mm thick factory made IInd Class Hard wood (Hollock) glazed and skeleton, open rebated, prepared to receive glass, gauge etc, without sash bars, edges of framing plain, chamfered and rounded, fitted with cut and mitered beads for securing glass/gauge etc. The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401, complete all as specified and directed.

S&F for mild steel work as in bands, straps, hold fasts etc and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.

S&F 100 mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws, complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm size aluminium handles, cast type, anodised, complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S&F 20 mm thick boarding (2nd class soft wood - Chir), fixed with nails in any situation (except flooring and skirting), planed one side with butt joints, complete all as specified and directed.

S&F 18/19 mm thick block boards, grade 2 quality, interior grade, decorative type with decorative face veneers on one side, fixed with screws to timber frame work, complete all as specified and directed.

M&L for 2nd class hard wood (Sal) as in scantling, timber framed and fixed, clean sawn, complete all as specified and directed.

M&L for preparing surfaces of wood and wood based materials new or old of any description and girth not otherwise described and treated with two coats of creosote oil, complete all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat or pink primer on wood or wood based surfaces, exceeding 10 cm in width or girth, incl preparation of the new surfaces, complete all as specified and directed.

M&L for preparing new steel surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chromate primer, complete all as specified and directed.

S&F 300 mm, ordinary rat tail rod pattern springs including roller, roller plate etc, complete all as specified and directed.

S&F stainless steel tubular curtain rods, 25 mm dia, with fixing brackets and one pair of decorative end caps etc, complete all as specified and directed.

S&F 20mm Gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed in repairs, complete all as specified and directed.

S&F of 16mm 3 layer PP-R Polypropylene random copolymer concealed pipes SDR 7.4 (PN16 ) UV stablized and antimicrobial fusion welded having thermal stability for hot and cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceiling or in floors etc., complete all as specified and directed.

S&F 20 mm dia Unplasticised PVC pipes of pressure rating 10kgf/cm2 fixed complete to wall ceilings or in floors, complete all as specified and directed.

S&F 25 mm dia Unplasticised PVC pipes of pressure rating 10kgf/cm2 fixed complete to wall ceilings or in floors, complete all as specified and directed.

Applying evenly a tack/priming coat of industial bitumen primer 85/25 as approved by Engr-in-Charge @ 1.2Kg/sqm over for use in damp proofing treatment on dried surface of concrete including cleaning surface, complete all as specified and directed.

S&F vitreons china wash down water closet pan, padestal type, white, including recessed bottom PVC seat cover of white colour and mild steel chromium plated hinging device but excluding flushing cistern, flush pipe and fixing bolt and making connections to drain or outgoing pipe and to flushing pipe, anti-syphonage pipe etc, fixed in repairs, complete all as specified and directed.

S&F in repair 10 Ltr capacity PVC low level flushing cistern, top push type with inlet ball valve, PVC float, brackets including superior quality PVC flush pipe of 32 mm dia, complete all as specified and directed.

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including brackets including cutting for and pinning in ends of brackets or erecting stand including 32 mm waste coupling and Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed.

S&F 15mm bore fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in repair fancy type angle valve 15 mm nominal bore cast copper alloy, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed, complete all as specified and directed.

S&F in repairs stop valves, fancy type, chromium plated brass with long shank and cup (Concealed type), screwed down, high pressure, both ends screwed to iron pipe or for union, bore of pipe 15 mm, complete all as specified and directed.

S&F 125mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.

S&F in repair bib taps, cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F 'D' type towel rail 60 cm long, stainless steel, fancy type, 20 mm dia, complete fixed with stainless steel screws, complete all as specified and directed.

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms), complete all as specified and directed.

S&F PVC (SWR) floor trap including jointing to waste pipe with solvent cement, diameter of outlet 75mm, plain with stainless steel grating, complete all as specified and directed.

M&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed.

S&F PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and laid in trenches/floor, complete all as specified and directed.

S&F PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and laid in trenches/floor, complete all as specified and directed.

S&F in repair PVC (SWR) bend 110 mm bore, any radius, incl jointing to waste pipe with solvent cement, complete all as required and as directed.

S&F in repair PVC (SWR) bend 75 mm bore, any radius, incl jointing to waste pipe with solvent cement, complete all as required and as directed.

S&F PVC (SWR) 110 mm bore double Junction (Double 'T'), equal or unequal, incl jointing to waste pipe with solvent cement, complete all as specified and directed.

S&F PVC (SWR) 75 mm bore double Junction (Double 'T'), equal or unequal, incl jointing to waste pipe with solvent cement, complete all as specified and directed.

M&L for Cutting holes in brick walls built in cement mortar exc. Half brick but not exc one brick for inserting holdfasts and making good dismantled portion in cement concrete 1:2:4 Type B-1 as required and directed by Engr-in-Charge.

Supply only liquid water proofing compound Dr Fixit LW+ or equivalent as approved by the GE, complete all as specified and directed.

S&F ABS body health faucet (Bidet spray) in chrome finish including 15 mm dia chromium plated pop up connection pipe of minimum 1.25 m length with CP brass nuts and ABS body wall hook, fixed in position, complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (Light/Fan/Socket/power) complete including fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. and making good the disturbed surfaces of walls/ floors etc by using plaster and wall care putty, complete all as specified and as directed.

Material and labour for concealed point wiring ,using approved colour coding (Phase-red, Neutral-black, Earth-green) complete with FRLSH PVC insulated and unsheathed stranded copper conductor cable 1.5 sqmm single core conforming to IS 694 including medium grade concealed PVC conduit conforming to IS 9537 (part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thickness of required size including painting terminal boxes inside and outside with two coat of synthetic enamel paint over one coat of red oxide primer with top cover 3 mm thick bakelite laminated sheet with brass screws and cup washer with all assessories including FRLSH PVC insulated and unsheathed stranded copper conductor cable 1.5 sqmm single core in green colour as earth wire connected to earth dolly, complete all as specified and directed . (a) One light/fan/exhaust fan point controlled by 1 No. one way 5/6 Amp switch.

(b) One 3 pin /5 pin socket outlet 5 Amp controlled by 1 No. one way 5/6 Amp switch on same board along with other switches, fan regulator etc.

(c) One 3 pin /5 pin socket outlet 5 Amp controlled by 1 No. one way 5/6 Amp switch on independent board.

Material and labour for point wiring, using approved colour coding (Phase-red, Neutral-black, Earth-green) complete for one socket outlet 15 Amp on independent board with FRLSH PVC insulated and unsheathed stranded copper conductor cable 2.5 sqmm single core conforming to IS 694 including medium grade concealed PVC conduit conforming to IS 9537(part-3) and ISI marked not less than 20 mm dia with concealed in wall pressed steel terminal box of not less than 2 mm thick of required size including painting terminal boxes inside and outside with two coats of synthetic enamel paint over one coat of red oxide primer with top cover 3 mm thick bakelite laminated sheet with brass screws and Cup washer with all assessories including FRLSH PVC insulated and unsheathed stranded copper conductor cable 2.5 sqmm single core in green colour as earth wire connected to earth dolly, complete all as specified and directed.

S&F Switch Socket combination 2 in 1, 3 pin 5 Amp and 3 pin 15 Amps, flush type, universal, 220 volts AC, complete all as specified and directed.

S&F for socket outlet, 5 Pin, 5/6 Amp flush type conforming to IS 1293 ISI marked, complete all as specified and directed.

S&F switch piano flush button single pole one way 5/6 Amp, 240 Volts conforming to IS 3854 ISI marked, complete all as specified and directed.

S & F ceiling rose, surface Bakelite, isolated body, three terminals, complete all as specified and directed.

Supply & fixing ceiling fan regulator, electronic type, five step rotary type, 220 volts AC, complete all as specified and as directed.

S&F in replacement sheet metal enclosures (MCB Distribution board) when MCB’s to be used single pole and neutral 8 ways 220 volt with 200 amps rated bus bar, double door with bus bar neutral link earth bar, Din rail, necessary blanking plated, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching all as specified and directed.

S&F in replacement sheet metal enclosure made of CRCA sheet, dust and vermin proof for vertical DB's, suitable for MCCB of capactiy upto 250 Amps/isolators/MCBs to be used, TPN, 4 ways (Double door), IP 43 with metal door with 200 Amps rated bus bar, neutral bar, earth bar, 415 volts, including fixing DB flush in wall complete with making good disturbed surfaces and colour matching all as specified and directed.

Supply & fixing in repair/replacement MCB TPN 63 Amps ‘C’ series 415 Volts, complete all as specified and directed.

S&F MCB single pole and neutral 240 volt, 10 KA, 63 Amp, 'C' series conforming to IS 8828 of 1996, complete all as specified and directed.

S&F MCB single pole 240 volt, 10 KA, 6 to 32 Amp, 'C' series conforming to IS 8828 of 1996 complete all as specified and directed.

Taking down carefully ceiling fan of any sweep and any make, disconnecting from ceiling rose and carrying out minor repairs, oiling and greasing etc, complete all as specified and directed by Engr-in-charge.

S & F sub main wiring using approved colour coding (Phase-red, Neutral-black, Earth-green) complete with two single core FRLS PVC insulated and unsheathed stranded copper conductor cable 4 sqmm as current carrying conductor and one run of 4 sqmm as neutral cable, voltage rating 1100 volt, ISI marked drawn in and including medium grade concealed PVC conduit ISI marked of dia not less than 25 mm and thickness 2 mm with standard accessories along with one run of FRLS PVC green colour insulated, unsheathed, stranded copper conductor of size 4 sqmm as earth cable,complete all as specified and directed including taking down old one. Note: Two run of single core FRLS PVC cable with one run of earth contunity conductor and conduit shall be measured as one unit.

M&L for earthing complete with galvanized steel earth plate 600x600x6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised earth lead wire of 4 mm dia as earthing lead by means of bolts, nuts, check-nuts, and washers of galvanised iron or steel besides welding at all joints as shown in drawings and including excavation and earth work, GI pipe light grade 15 mm bore for protection of GI wire from earth electrode to test point /machinery / equipment, supplying and laying charcoal dust comman salt PCC (1:2:4) type B1 using 20 mm graded stone agregrate chamber and RCC cover 54 cm X 54cm x50 mm thick (1:2:4) type B-1 using 20 mm stone agrigrtae ) reinforced with 8 mm dia TMT bars @ 75mm C/C both ways with mild steel handle 12 mm dia, using round bar, PGI funnel with wire mesh, 20 mm dia GI pipe medium grade for watering all as shown in electrical plate No-3 of SSR part-1 including testing and taking out the old one complete all as specified and directed Note - Cost of GI wire and GI protection pipe up to a distance 7.5 M shall be included in quated rate of above Items.

Supply and laying & testing cable XLPE insulated heavy duty electric cables with stranded aluminium conductor, 1100 volts grade, cross sectional area 70 Sqmm 3.5 core including necessary cable lugs, bolts, nuts and washers complete all as specified and directed.

Supply and laying & testing cable XLPE insulated heavy duty electric cables with stranded aluminium conductor, 1100 volts grade, cross sectional area 50 Sqmm 3.5 core including necessary cable lugs, bolts, nuts and washers complete all as specified and directed.

Excavation in trenches n.exc 1.5 mtr wide and n.exc 1.5 mtr deep in loose / soft soil and getting out for under ground cable / erection of poles, stays etc complete all as specified and as directed.

Returning, filling in soil including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick complete all as specified and directed.

Removing of excavated material (soil) not exc 50 mtr away and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed.

M&L for laying of bricks subclass ‘B’ old size laid flat perpendicular to the direction of cable for protection of cable complete all as specified.

M&L clean dry river washed sand filling in trenches around underground cable, complete all as specified and directed. (Note: Depth of sand shall be measured after punning.)

S&F 40 mm bore GI tubing, light grade, with all fittings and laid in trenches/under roads, drains etc, or fixed to poles/walls with FI clamps, nut, bolts etc and making good disturbed surfaces, complete all as specified.

S&F LED building security light fitting complete 70 Watt with high power energy saving pressure die cast aluminium IP 66 roadway luminiares, heat resistant toughened glass with frame, better optics for uniform distribution with high power LED as Light source, complete all as specified and as directed. Make - CG Cat Part No LSTS-70-CDL-M- or equivalent make and model of makes listed in Appendix to Particular Specifications.

Supply & fixing in repair of decorative batten type fittings with E-Lite LED Quadra Glow decorative fitting, 1.20 m long, 4 step dimming with a click of switch from 22W complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, complete all as specified and directed.

Supply & fixing in Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings, 220 volts AC, complete all as specified and directed.

Supply & fixing in repair of LED 15 watt retrofit bulb with holder base B-22 with polycarbonate body and aluminum heat sink, minimum 100 lumens per watt, complete all as specified and directed .

M&L for painting of ceiling fan, complete in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc and preparation of surfaces, complete all as specified and directed.

Hanging only ceiling fan and connecting up including provision of three core copper conductor cable of appropriate size from ceiling rose or connector to fan, complete all as specified and directed.

Supply ,installation, testing and commissioning of LT control panel out door , factory made pedastal type fabricated out of 3.15 mm CRCA sheet with changeover switch of same amp as main incoming MCCB, having inner sheet of MS black and slopy roof , spray painting two coat inside and outside with synthetic enamel paint of approved shade over a coat of red oxide primer complete with locking arrangement, provision of cable gland for all incoming and outgoing cable, grouting of feeder piller box 30 cm above ground level by providing 45 cm long angle iron of size 40x40x6 mm welded on all the for corner embeded in PCC 1:2:4 using 20 mm stone agregrate up to 30 cm deep complete including comprising the following components: - (A) Incoming: (a) MCCB 4 Pole 440 Volts, 250 Amp, 36 KA – 01 No. (B) Outgoing: (a) MCCB 4 Pole 440 Volts, 125 Amp, 25 KA – 04 Nos (b) MCCB 4 Pole 440 Volts, 63 Amp, 25 KA – 02 Nos (c) MCB SPN, 220 Volts, 40 Amp, 'C' Series – 02 Nos (d) LED type indicator lamp (green/red)- 01 set

A K C PROJECT

PAPPU ROY CONSTRUCTION