REPAIR/REPLACEMENT TO WATER SUPPLY INSTALLATION AND CONNECTED WORKS IN ARMY AREA AT UDAIPUR MIL STN

Amount

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out soft/loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm soft/loose soil.

Removing excavated material n exc. 50m and depositing wheredirected at a level n exc. 1.5 m above the starting point

Taking out from trenches G I pipe 100 mm dia with flanged end in existing position and removing from site.

Supply and Laying G I TUBING 100 mm dia flanged ends, Class B medium grade including all fittings and accessories , in any length, laid in trenches fixed on ground / pedastal and making good disturbed ground/pedastal.

Supply and Laying G I TUBING 50 mm dia flanged ends, Class B medium grade column Pipes including all fittings and accessories , in length 3 meters withwelded both ends flanfed and drilled having cut for passing submersible cables and including clamping arrangement on each 1 m for cables, laid in Borewell

Supply only G M gate valves with iron wheel head, screwed both ends for iron pipe and fixed of size 50 mm ISI marked.

Supply only G M gate valves with iron wheel head, screwed both ends for iron pipe and fixed of size 40 mm ISI marked.

Supply only G M gate valves with iron wheel head, screwed both ends for iron pipe and fixed of size 25 mm ISI marked.

Supply only G M gate valves with iron wheel head, screwed both ends for iron pipe and fixed of size 20 mm ISI marked.

Supply& Fixing CI gate valves with iron wheel head, screwed both ends for iron pipe and fixed of size 150 mm ISI marked.

Supply only M-Seal (Pack of 50-100 gm Each)

Supply Only 20 mm dia GI Socket ISI Marked

Supply Only 20 mm dia GI Nipple of Length 300mm ISI Marked

Supply Only 20 mm dia GI Nipple of Length 150mm ISI Marked

Supply Only 20 mm dia GI Nipple of Length 100mm ISI Marked

Supply Only 20 mm dia GI Nipple of Length 50mm ISI Marked

Supply Only 20 mm dia GI Union ISI Marked

Supply Only 20 mm dia GI Tee ISI Marked

Supply Only 20 mm dia GI Plug ISI Marked

Supply Only GI Reducer 20mm x 15 mm ISI Marked

Supply Only 20 mm dia GI Elbow ISI Marked

Supply Only 25 mm dia GI Socket ISI Marked

Supply Only 25 mm dia GI Nipple of Length 300mm ISI Marked

Supply Only 25 mm dia GI Union ISI Marked

Supply Only 25 mm dia GI Tee ISI Marked

Supply Only 25 mm dia GI Plug ISI Marked

Supply Only GI Reducer 25mm x 20 mm ISI Marked

Supply Only 25 mm dia GI Elbow ISI Marked

Supply Only Bleaching Powder

Supply Only rubber Sheet of Thickness 6 mm

Supply only G M Non Return valves screwed both ends for iron pipe and fixed of size 50mm ISI marked.

Supply only GI Clip Joint with nut bolt 40mm

Supply only GI Clip Joint with nut bolt 50mm

Supply only GI Clip Joint with nut bolt 80mm

Supply and fixing DOL starter with MS sheet( 2 mm Thick) enclosure suitable for - 7.5 HP Submersible motor in existing location including making connection with PVC insulated 1100 volts grade ,three core , multistranded copper conductor of size 6.0 sq mm with voltmeter,ampere meter, Auto Switch,Single Phase Preventor & Indicating Lamp Led Type for Phase Indication (Red Yellow 7 Blue) ,all as directed and specified .

Supply and fixing of LT panel board of size 600x900x450mm for submersible pump set madeout of 2 mm thick MS sheet fabricated out complete KIOSK type both side opening hinged door and locking arrangement with 200 amps aluminium busbar mounted on porcelain insulator for three phase and neutral complete painted with powder coated synthetic enameled paint over a coat of redoxide, wormin proof ,dust proof comprising with following:-

a) MCB 63 amps, four pole 15 KA -1 No (incoming) b) Star delta starter capacity 40 HP - 01 No c) Auto switch with CT 40 amps - 01 No d) Volt meter digital type 0 to 500 volts -01 No e) Ampr meter digital type 0 to 200 amps - 01 No f) Indicating lamp Led type for phase indication (Red,Yellow,Blue) - set of three- 01 set (g) Single Phase Preventor - 01 Nos

Supply and fixing of Auto switch including following features :- a) automatic start the motor b) Protect motor from running in two phase c )Protect motor against single phase d) protect motor against low/high voltage e) Protect motor against reverse running, f) Starting time delay 1minut appx.etc Make-GELCO only

Supply only lead pig

M & L for making good road 50 mm thick in layers by patch mate of approved make all as directed by Engineer- in charge.

Materials and labour for cleaning of under ground sump (including suction well), pumping out free board water by means of pump etc, removing complete dirt and dust, removing scale from wall, floor and ceiling, including spraying inside anti bacterial solvents etc including making a base for following sump by painting in black synthetic enamelled paint out side of sump of size 100 x 45 cm, i.e (i) Sump capacity (ii) Dimensions of sump (iii) Date of cleaning (iv) Due date of cleaning.

(a) 1.2 Lakhs gallons capacity at Pump House No1- 01Nos

(b) 0.6 Lakhs gallons capacity at PH No 2

(c) 0.4 Lakhs Gallons capacity at PH No-02

Material & Labour for carring to work shop U/S submersible motor (water cooled or oil cooled) & pump including cutting U/S winding , removing insulating material, cleaning and rewinding with PVC insulated 1100 volts grade single core copper conductor as per IS 694 winding wire of appropriate size/gauge as per existing , providing insulting mterial of superior quality , supply & replace thrust bearing , assembling the motor complete , including coupling with multistage pump , jointing & connecting with submersible cable and testing at site for following HP : 40 HP of any make

All as per item No 11 above but 7.5 HP of any make

Material & Labour for taking out unservisable submersible pumpset(alogwith submersible motor)of any capacity & make,including delivery pipe 40/50 mm bore,flanged GI tubing (Average 3 meter long each pipe), from borewell depth 120 to 150 meters, and including lowering the same after repairs of pumpset all as directed by Engr-in-Charge. Note:- (i) Rates are deemed for making flanged joints with rubber washers and replacement of rusted nuts,bolts in work etc all as directed by Engineer-in-charge.

M & L for taking Out UNSV Submersible pumpset ( alongwith submersible motor) of any capacity , make & depositing the same in MES store yard from borewell depth 120 to 150 meters, including lowering of new supply ,installing,testing and commissioning submersible pump set , electric motor 7.5 HP three phase 415 Volts ,AC coupled with multistage having discharge 2.5 LPS at 143 Mtrs Head.Outlet size 50 mm Note : Rates are deemed to be including for making falnged joints with new rubber washers and nuts , bolts work and all as directed by Engr-In-Charge Make :- Kirloskar/Crompton/CRI

Supply and replace PVC insulated and sheated 1100 grade,flat type Submersible Cable 3 core,multistranded,Copper conductor of Size 4.0 Sqmm Make :- Finolex/Nicco/Elbee

M & L for Complete removal of existing treatment of exterior surface of RCC Over Head Tank/Reservoir and applying two coats of Exterier weather proof paint tInted on existing surfaces all as specified and directed by by Engineer-in-Charge height upto 30 mtr from GL . Make :-Asian Paints (Brand-Ace)/ Berger paint (Brand -Walmasta) / Nerolac paint (Suraksha plus)

M & L for interior surface of RCC Over Head Tank/Reservoir and applying one coat of cement base paint tInted on existing surfaces all as specified and directed by by Engineer-in-Charge height upto 25 mtr from GL . Make :-Super Snowcem india/ Berger paint (Brand -Duracem) / Asian Paints

Material and labour for painting of CI Pipe line any dia with bend and flanges, MS ladder and railing with two coats of synthetic enamel paint of approved quality and colour incl preparation of old painted steel surfaces as directed by Engr - in- charge upto 30 mtr ht from GL. (Make: Asian Paint, Brands-Premium gloss enamel/Berger- Luxol High Gloss/Nerolac-Sunthetic Hi- Gloss)

M&L for fabrication of MS ladder/Railing from angle iron size 50X50X6 mm and other section and 25 mm dia bars including cutting , welding etc and painting two coats of synthetic enamel paint over one coat of red oxide primer complete as in repairs upto 30 mtr ht grom GL all as specified and directed by Engineer-in-Charge.

S&F framed work as in doors or gates or framework for water tanks of angle or other section with gussest plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering doors etc, to be prepared for hanging and sliding with and including either hooks and hinges or steel hnging door fittings and fixing complete confirming to gde Fe 290 (Gde E-165)

S&F framed work as in framework for fixed type window/ventilator of angle/flat iron/wiremwsh etc fixing complete confirming to gde Fe 290 (Gde E-165) in overhead tank upto 20 mtr ht from GL.

M&L for bailing / draining out of water, taking out deposited sludge, cleaning of internal surfaces of RCC over head Tank/Reservoir by using steel wire brushes and complete removal of debris to a distance minimum 50 mtr away from over head tank etc and washing the under ground sump / overhead tank using bleaching powder solution in 1st wash and sodium hypochloride solution in 2nd wash and clean water in 3rd wash includung one coat of white wash with lime to internal surfaces and marking the date of cleaning, due date of cleaning and capacity of under ground sump / overhead tank all as specified and directed for the following

RCC overhead Tank/Reservoir of capacity 1 lakh gallon

RCC overhead Tank/Reservoir of capacity 50 thousand gallon

Material and Labour for 15mm thick rendering on fair faces concrete surfaces of overhead RCC tank in tappered portion area exc. 1 sqm but not exc. 2 sqm upto 25 mtr ht from GL in cement mortar 1:4 mixed with and including liquid water proofing compound Dr. Fixit Pidifin 2K using as per manufacturer’s instructions finished even and fair, complete all as specified.

M&L for removing of honey hives from bottom and tappered portion of RCC overhead tank height upto 25 mtr from GL.

M&L for sand filling under floor including watering and consolidation

M&L for machine pressed precast concrete interlocking paver block rubberised any shape & size conforming to IS- 15658 - 2006 of 60 mm thickness M-35 Grade with grey cement & pigment complete all as specified.

PCC (1:3:6) type C1 using 20mm graded stone aggregate as in cills copings, bed plate, plinth courses, roof kerbs or mud stops rounded or chamfered on edges complete.

S&F Stainless Steel letters/Emblem not Exc. 30 cm height fixed on granite finish surfacesof pillars/ walls

M/s Shiv Builder and Suppliers