Construction Of Residence Of Chief Engineer (Level-1) In Jhansi District

Amount

Cutting heavy under growth and bushes up yo 7.5 cm dia including removal of roots with collections and removal. As per UPID SOR Ch-4 SI No.4.40(b)

Excavation of foundation in Mar, Rankar and kankar mixed soils including lift up to 1.5 meter and lead upto 30 meter including filling, watering, ramming, of excavated earth into the trenches or upto the space and sides of the foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Engineer-in charge upto a distance of 30 meter from the foundation trenches. As per UPID SOR Ch-4 SI No.4.02 (a)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) including supply of all materials, labour and tools and plants etc. required for proper completion of the work. As Per DSR 2023 Specification Item No 4.1.8

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). As Per DSR 2023 Specification Item No 5.1.2

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). As Per DSR 2023 Specification Item No 5.2.2

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, suttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). As Per DSR 2023 Specification Item No 5.3

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns. As Per DSR 2023 Specification Item No 4.3.1

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. As Per DSR 2023 Specification Item No 5.9.2

Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers. As Per DSR 2023 Specification Item No 5.9.5

Centering and shuttering including strutting, propping etc. and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts. As Per DSR 2023 Specification Item No 5.9.6

Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform. As Per DSR 2023 Specification Item No 5.9.3

E/w in Mar rankar & Kankar mixed soil in filling including lead upto 11 Km and lift upto 1.5 M including dressing with mechanical compaction. As per ID SOR Chapter no. 4 s. no. 4.05

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand). As Per DSR 2023 Specification Item No 6.1.1

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : cement mortar 1:4 (1 cement : 4 coarse sand). As Per DSR 2023 Specification Item No 6.4.1

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand). As Per DSR 2023 Specification Item No 6.4.2

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level./Above plinth Level Thermo-Mechanically Treated bars of grade Fe-500D or more. As Per DSR 2023 Specification Item No 5.22.6/5.22A.6

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement: 6 coarse sand). As Per DSR 2023 Specification Item No 13.5.2

Washed stone grit plaster on exterior walls height upto 10 metre above ground level, in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand ), furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15 mm cement plaster 1:1/ 2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10 mm nominal size), in panels with groove all around as per approved pattern, including scrubbing and washing the top layer with brushes and water to expose the stone chippings ,complete as per specification. As Per DSR 2023 Specification Item No 13.72

12 mm cement plaster of mix :1:6 (1 cement: 6 coarse sand). As Per DSR 2023 Specification Item No 13.4.2

Making Plinth protection 50 mm thick of cement concrete 1:3:6 over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand , including finishing the top smooth. As Per DSR 2023 Specification Item No 4.17

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. As Per DSR 2023 Specification Item No 2.27

1:2:4 (1 Cement : 2 coarse sand (zone-lll) cement concrete derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources) in foundation & floors. As Per DSR 2023 Specification Item No 4.1.4

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete. As Per DSR 2023 Specification Item No 8.2.1.2

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. ( size 600x600 mm). As Per DSR 2023 Specification Item No 11.41.2

Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete. As Per DSR 2023 Specification Item No 11.23.1

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate. As Per DSR 2023 Specification Item No 13.3.1

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin- Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. As Per DSR 2023 Specification Item No 11.37A

Providing and laying rectified Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. As Per DSR 2023 Specification Item No 11.39

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dashfastener shall be paid for separately).Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). As Per DSR 2023 Specification Item No 9.1.1.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. As Per DSR 2023 Specification Item No 10.25.2

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Second class teak wood As Per DSR 2023 Specification Item No 9.7.1

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Ply wood 7 ply, 9 mm thick Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to 1S 1328 BWR Type. As Per DSR 2023 Specification Item No 9.7.4.1

Providing & Laying "brick bat coba" 100 mm thick laid with M- 150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of coba mortar mixed with water proofing compound in 1:4 cement and coarse sand mortar finished smooth & top mashed false square 30 cm x 30 cm and side wall parapet shall be monotythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand and masonry coba with top finishing plaster mixing with acetic water proofing compound @ 2% by weight & Including supply of all materials labour T&P etc. required for proper completion of works.

Painting wood work/Iron work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over and under coat of primer applied @0.75 ltr/10 sqm of aroved brand and manufacture. As Per DSR 2023 Specification Item No 13.48.2

Finishing walls with Acrylic Smooth exterior paint of required shade : 13.46.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm. As Per DSR 2023 Specification Item No 13.46

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. As Per DSR 2023 Specification Item No 13.26

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre. As Per DSR 2023 Specification Item No 13.41.1

Providing and laying cement concrete in retaining wall excluding cost of centering and shuttering. 1:1½:3 (1cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). As Per DSR 2023 Specification Item No 4.2.2

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in- Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern. As Per DSR 2023 Specification Item No 16.91.2

P/F 110mm dia PVC Pipe(working pressure 4.00Kg/cm2). As Per DSR 2023 Specification Item No 7189

P/F of 15 mm dia G.I. pipe class-B . with G I fitting and clamps I/C cutting and making good the walls to their original shapes I/C cost of all labour, T&P etc. required for proper completion of work. (For Internal work) As Per DSR 2023 Specification Item No 18.10.1

P/F of 20 mm dia G.I. pipe class-B . with G I fitting and clamps I/C cutting and making good the walls to their original shapes I/C cost of all labour, T&P etc. required for proper completion of work. (For External work)

P/F Wash basin with C.I. brackets, 15 mm CP brass Piller taps 30 mmC.P. brass waste of standerd pattern including painting of fitting and brackets, cutting and making good the walls whenever requires

P/F vitreous chine daul purpose closet suitable for use as squatting pan or European type water closet (anglo Indian W.C. Pan)with seat and lid fixed with C.P. brass hinges and rubber buffer 10 liter Low level flushin cisten with fitting and brackets, 40 mm flush bend 20 mm overflow pipe, with special of standerd make and mosquito proof coupling of approved municipal designe complete, including painting of fitting and brackrts, cutting and making good the walls and floors where ever required.

P/F of 100mm size P or S trap for W.C. sqatting pan i/c jointing the Trap with the pan and pipe in 1:1 cement mortar i/c cost of all material, labour, T&P etc. complete in all respect.

P/F of 15mm dia (810gm.) C.P. brass bib cock (Long Nose) approved quality confirming to IS stantderd including threading the pipe if required also i/c cost of all material , labour, carriage T&P etc. for proper completion of work in all respect.

P/F of 15mm dia CP Brass single lever wall mixer of quality and make as approved by engineer- in - charge.

P/F of 15mm dia C.P. brass stop cock(concealed) approved make for cistern, wash basin, cyser of approved make including threading the pipe if required also i/c cost of all material , labour, carriage T&P etc. for proper completion of work in all respect.

P/F of 8 mm dia CP/SS Jet with flexible tube up to 1 m long with SS triangular plate to European type W.C. of quality and make as approved by Engineer - in Charge.

P/F of PTMT towel rail 600 mm long completed with brackets fixed to wooden clits with C.P. brass screw with consealed fitting arrangment of approved quality and colour.

P/F 600x450 develed edge mirror of superior glass of approved quality complete with 6mm thick hard board backing fixed to wooden cleats with C.P. brass screw and washers i/c cost of all material, labour, carriage T&P etc. complete in all respect.

P/F of 50mm dia CPVC pipe having thermal stability for hot and cold water supply including all CPVC plaine and brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing this include joints of pipe and fittings with one step CPVC solvent cement and testing of joints complete as directed by Engineer -in -Charge.

P/F Stainless steel sink as per IS: 13983 with C.I. bracket and S.S. pluge including painting of fitting and brackets cutting and making good the walls wherever required kitchen sink with drain board 510x1040 mm bowl depth 225 mm.

S/F Nahani trap of approved heavy quality complete make PVC with CP brass grating Nahani trap laid over base CC 1:6:12 including S/o all material labour T&P etc. for proper completion of the work. Ch.no-22, S.I.No.60

Supply and installing of low density polyethylene seamless one peace moulded tank and placing the same in proper position including all taxes labour and T&P etc for proper completion of the work. Tank should be ISI mark

Wiring point for Light point One Way with 1.5mm² FR PVC Insulated with M/S copper wire with 1.5mm² Insulated M/S copper wire as earth wire drown in PVC pipe partly laid in slab & partly load in the wall with modular tyhe switch, ceilling rose/angle/Batten Holder bucket sheet etc complete in all respect.

Wiring point for Ceilling Fan/Fresh air Fan Point with 1.5mm² FR PVC Insulated with M/S copper wire with 1.5mm² Insulated M/S copper wire as earth wire drown in PVC pipe partly laid in slab & partly load in the wall with modular tyhe switch, ceilling rose/angle/Batten Holder bucket sheet etc complete in all respect.

Wiring point for Plug Point+TV Point+Aquaguard Point with 1.5mm² FR PVC Insulated with M/S copper wire with 1.5mm² Insulated M/S copper wire as earth wire drown in PVC pipe partly laid in slab & partly load in the wall with modular tyhe switch, ceilling rose/angle/Batten Holder bucket sheet etc complete in all respect.

Wiring point for plug point with 5 Amp flush types switch and 3 pin socket and earth continuity wire of 1.5 sq. mm. FRL SHPVC insulated multi strand copper conductor cable.(drawn through existing concealed steel conduit) and ceiling rose/angle/batten holder fixed with 3 mm thick phenolic laminated back alite sheet with brass machine screws and cup washers mounte dover existing M.S. switch board box/junction box with supply of all material,labour & T&P etc. required for proper completion of the work as directed at site

Wiring point for Call Bell Point with 1.5mm² FR PVC Insulated with M/S copper wire with 1.5mm² Insulated M/S copper wire as earth wire drown in PVC pipe partly laid in slab & partly load in the wall with modular tyhe switch, ceilling rose/angle/Batten Holder bucket sheet etc complete in all respect.

Wiring point for Exhaust Fan Point with 1.5mm² FR PVC Insulated with M/S copper wire with 1.5mm² Insulated M/S copper wire as earth wire drown in PVC pipe partly laid in slab & partly load in the wall with modular tyhe switch, ceilling rose/angle/Batten Holder bucket sheet etc complete in all respect.

Add for invertor wiring point for light/fan /plug

S/F of 20A/250V power plug fush type modular switch and 5 pin 20A/250V flush type universal modular socket on concealed M.S. Box including supply of all material labour T&P etc. required for proper completion of the work.

S & F sheet steel enclosure surface/Flush mounting fitted with 20Amp. 2Pin and earth metal clad scraping earth plug and socket complete in all respect. as directed at site by Engineer in charge.

S/F of 4way TPNDB with additional at Metal Door without MCB Complete in all respect.

S/F of 63 Amp. 4 pole MCB (10 KA) C Curve

S/F of 12ways SPNDB with add. Metal door without MCB Complete.

S&F of 63 Amp. DP MCB (10 KA) C Curve

S/F of 6A to 32A SPMCB (10 KA) complete.

S&F of 63 Amp. 415 V metal clad T.P.N. rewireable type switch fuse unit on angle iron bracket complete in all respect.

S&F of 63 Amp. four pole change over switch on 40mm x 40mm x 6mm angle iron frame, including the cost of labour, T&P, painting and other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.

Supply and fixing of LED Tube Light with batten suitable for up to 1 X 22 watt LED tube light fitting including tube on Surface complete in all respect.

Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 Watt. Confirming to IP66 Protection complete in all respect.

Supply and fixing of Single LED light wall bracket 3 to 6 Watt on matching M.D.F.E.G Board base etc. complete in all respect

S/L of following size submain copper conductor cable in concealed PVC conduit. 2.5sq.mm 2 wire.

S/L of following size submain copper conductor cable in concealed PVC conduit. 6.00 sq.mm 2 wire

S/L of following size submain copper conductor cable in concealed PVC conduit. 25.00 sq.mm 2 wire

S/L of following size submain copper conductor cable in concealed PVC conduit. 25.00sq.mm 4 wire.

Supply and laying of 120.00 Sq. mm 3.5 Core aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.

Supply and fixing of 120.00 Sq. mm 3.5 Core brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of Engineer-Incharge.

Supply and fixing of electronic fan regulator 120-280 V. ISI marked, on the existing switch board including making connections, required material, labour T&P etc. for proper completion of work to the satisfaction of Engineer in charge of work.

Supply and burying of 600mm x 600mm x 3mm copper plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead of one no. 8 to 10 SWG copper wire in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. pipe and copper wire will be extra) 30cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal/coke and salt at least 150mm thick alround etc. complete in all respect.

Supply and fixing of Two number 8 SWG Copper wire in 15mm dia. G.I. pipe for earthing, laid in ground or in wall duly concealed including the cost of cement, sand, labour, T&P other material required for proper completion of the work as directed at site.

Supply and fixing of door chime on polished MDFEG / Teak ply board including making connections etc. complete in all respect.

Supply and fixing of fire extinguisher, ABC Type 6.00 kg. capacity (ISI Marked IS : 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.

Supply and fixing of fire bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge.

Supply and fixing of 16 SWG M.S. drum with luvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respect.

SHIV SUNDER CONSTRUCTION & CONSULTANTS PVT LTD (BID ID -4924360)

M/S ARCHANA CONSTRUCTION (BID ID -4917218)