TVD-THIRUVETTRIYUR ANGANWADI BUILDING

Earth work Excavation in all classes of soils such as hard stiff clay. Stiff block Cottonsoil hard red earth, shales, murram, gravel, stoney earth mixed with 50% fair sized Boulders etc hard rock requiring blasting Complete ss 20 A

Cement Concrete 1:4:8 mix using 40mm ISS HBG metal including cost & conveyance of all materials to site and all Labours etc

Collection and supply of Gritty gravel from appd quarry including cost and conveyance of all materials to site including all labour charges for filling etc.complete,

Supplying filling with filling sand in layers not more than 15 cm thick ,well rammed, wattered and compacted etc,complete

Brick work with cement mortar 1:5 mix using country bricks of size 83/4"x41/4"x2" for foundation and basement and superstructure inculding cost and conveyance of all materiales curing etc ,complete.

Reinforced Cement concrete 1:11/2:3 mix using 20 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,laying,curing etc complete.,

Supplying and fabrication,placing in position of mild steel or ribbed Tor steel grils for RCC works inculding cost of steel and binding wire etc.

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete.,

Supplying and erection centering for sides and soffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beam coloum,sunshade etc complete.,

Weathering Coarse Bricks jelly concrete using 20mm bricks jelly using slacked lime including all meteriyal nd other chareges etc comp Weathering Coarse

Paving the Top of roof with Pressed tiles of size 200 x 200 x 2mm thick of approved quality and colour laid in Cement mortar 1:3 (One cement and three sand) 12mm thick and pointed with tile grout (Nitotile Grout or equivalent) and cement in the ratio of 1:3 for joint, curing etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by the Executive Engineer before use on works)

Plastering with Cement Morter 1:5 mix 12 mm thick inculding cost and conveyance of all materials to site and labour charges for curing etc

Paving the floor with kotta stone of size 610x610x 20mm cm 1:3 20mm thick

Granolithic floor finish of 25 mm thick in PCC 1:2:4 using 10-12 mmHBGS Jelly inculding curing etc

Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications (The wall putty shall be got approved by the Executive Engineer before use of work).

Fabrication and supply of mild steel Door of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

Door 0.90 x 2.10 m

Door 1.20 x 2.40 m

Door 0.75 x 1.50 m

Fabrication and supply of mild steel window of any size with single leaf outer frame made of 35x35x5 mm equal M.S angle and shutter frame made of 25x25x5 mm M.S angle for horizontal and vertical member with stiffener and fully covered with 18 G plate etc complete.

window 1.50 x 1.30 m

ventilator 0.90 x 0.45 m

RCC Jolly 0.60 x 0.45m

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )

Plastic Emulsion painting two coats over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( outer wall )

Painting two coat of new iron works such as steel Doors,windows,ventilators, etc., with best approved first quality of synthetic enamel paint of approved colour over the existing priming coats,ete.

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3 mm thick Hylum sheet cover with TW box And 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 17

Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 150 mm X 100 mm X 113 mm TW switch box with 3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for concealed PVC plug point SD 37

Supply and run of 2 of 4.00 sq.mm (56/0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade on 7/20GI bearer wire for service connection mains SD 67

Supply and run of 2 X 4.00 sq.mm (56 / 0.30) PVC insulated SC unsheathed copper Conductor of 1100 V grade in 25 mm dia GI pipe ( Class ' B ' ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 70

Supply and fixing of 1200 mm ( 48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp. SD 107

Supply and fixing of single box type Compact flourescent tube fitting with copper choke and condenser with TW round block on wall or ceiling with flourescent tube with PVC unsheathed copper leads from terminals to the fitting of Tube Light [SD 84]

Supply and Fixing of TNEB meter board suitable for 32A single phase service connection with 32A fuse unit on TW plank on wall with earth connection and inter connection with 7/20 PVC insulated copper wire from EB meter to fuse unit SD125

Supply and fixing of WT bulk head fitting with guard for 11W CFL SD 83

Supply and fixing of 300 mm ( 12") sweep AC Exhaust fan complete with necessary wall opening and making good on the wall. SD 114

Supply and fixing of indian Water closet with "P" ' S' trap, PVC Pipes, 580mm x 440mm etc. complete.

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 125 mm "P" or "S" trap connecting with CI pipe of 125mm dia / PVC pipe

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair

Provision for PVC tank of 1000 litres Capacity Tank and Fitting Arrangements

Bala painting for both inner and outer Portion Including Material and Labour Charges

Earthwork Excavation in narrow trenches or laying and joijting of pipes and specials and depositing on bank with an initial lead of 10 m and initial lift of 2 m in hard stiff clay. Still black cotton, hard red earth shales murrams hard gravel soil including shoring strutting lighting and watching and tested etc., complete as directed by RDDA officers.

Refilling with excavated earth after the pipes are laid jointed and tested including watering ramming and consolidation etc., Complete as directed by RDDA., Officers

Supply Deliverry of PVC Pipes to confirm to ISI Specification and as amended from time to time PVC PIPE PN6 63MM

Conveyance of the PVC Pipes to site and lowering into trenches laying to proper grade and alignment jointing with PVC Couplers with cement paste including cost of fixing specials (Specials should be supplird by the contractor) and testing the required pressure including conveyance of water upto 1.00 KM lead for filling curing testing as directed by RDDA., Officers HDPE PIPE PN6 63MM

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}