REPAIRS TO PLUMBING, SANITARY FITTINGS, SUNKEN TREATMENT AND OTHER RELATED WORKS IN AREA-II UNDER AGE B/R-II KAMPTEE

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding and rubbish off the premises complete all as specified and directed.

M&L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed.

M&L for coloured glazed ceramic tiles 300x450x6 to 7mm thick, in floors etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including rendering 10mm thick in CM (1:4) complete all as specified and directed.

M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished area each tiles not exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over 15mm thick screed bed of cement mortar (1:6) complete all as specified and directed.

All as per item No 4 above but dark shade virified ceramic tiles complete all as specified and directed.

All as item No 4 above but as in skirting with 10mm backing in cement mortar (1:4) complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for 25mm thick PCC (1:2:4), type B0 (using 12.5mm graded stone aggregate) as in sunken floor complete all as specified and directed.

M&L for rendering 15mm thick on brick or concrete surfaces in CM (1:4) using water proofing liquid compound as per manufacturer instructions and finished fair and even complete all as specified and directed. (Note:- WPC shall be measured and paid separately.)

Supply only liquid integral water proofing admixture complete all as specified and directed.

M&L for PCC type E2 (1:5:10) (using 40mm graded aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.

M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.50 kg/sqm over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100mm over lap on both sides all as per manufacturer's instructions including 15mm thick screed bed in CM (1:4) and aluminium paint of 0.2Kg/Sqm over membrane complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks old size, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

All as per item No 15 above but half brick thick wall in CM (1:4) complete all as specified and directed.

Taking down cement or cement plaster, any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on brick work or concrete sufaces including finished fair and even complete all as specified and directed.

M&L for preparing new plastered surfaces and applying three coats of white wash complete all as specified and directed.

M&L for preparing new plastered surfaces and applying two coats of OBD over a coat of calk whitening and coats of wall care putty etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and as directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

S&F pre-polished granite, 20mm thick, fixed on platform/shelves over 20mm thick screed bed in cement mortar (1:6) including necessary moulding etc complete all as specified and directed.

Demolition of RCC in any description and in any position not otherwise specifically provided for complete all as specifed and directed.

M&L for precast RCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, mangers, shelves and similar articles with plain faces and set in CM (1:6) (reinforcement measured and paid separately) complete all as specified and directed.

M&L for mild steel TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending and binding with mild steel (anneal) wire not less than 0.90mm dia complete all as specified and directed.

S&F in repairs vitreous china white squatting pan "Orissa Pattern" size 580x440mm, with integrated foot rest (excluding flushing cistern, flush pipe etc) including making good to floor complete all as specified and directed.

S&F in repair white vitreous china wash down water closet pan (pedestal pattern) including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device including flush pipe and fixing bolts (excluding flushing cistern) etc complete all as specified and directed.

S&F in repair 10 litre capacity PVC valveless syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repairs wash hand basin (flat back or angle back) of size 550 x 400mm white including waste pipe, chain and plug, porcelain stopper including for & pinning in ends of brackets including supply & fixing of waste pipe complete all as specified and directed.

S&F in repairs vitreous china pedestal for WHB white complete all as specified and directed.

S&F wash basin oval type (56x41cm) complete all as specified and directed.

S&F in repair vitreous china urinal, half stall pattern, white (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader, connections to flushing pipe complete all as specified and directed.

S&F in repairs bib tap 15mm dia cast copper alloy, chromium plated, fancy type with crutch or butter fly handle screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs pillar tap 15mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F pillar cock swan neck 15mm bore brass CP screwed for iron pipe including taking down existing one complete all as specified and directed. Make: Prayag cat No 7814 or equivalent.

S&F in repairs chromium plated shower rose with or without swivel joints of 125mm dia including fixing to 15mm bore of pipe complete all as specified and directed.

S&F in repair stop valves/ angle cock, cast copper alloy, screwed down, fancy type chromium plated high pressure, with crutch or butterfly handles, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair two way angle cock, cast copper alloy, screwed down, fancy type chromium plated high pressure, with crutch or butterfly handles , screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and directed.

S&F in repair 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and directed.

S&F in repair pillar taps 15mm of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs 32mm bore of pipe low density polyethylene pipe (LDPE) including necessary elbow, tee, socket, etc of pressure rating 6kg/cm fixed complete all as specified and directed.

S&F in repairs flush pipe of polythene of low or high density 32mm PVC for low level flushing cistern complete all as specified and directed.

S&F in repairs urinal spreader of brass chormium plated for fixing with 15mm dia pipe complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in cement mortar (1:3) complete all as specified and directed.

S&F GI tubing 15mm bore medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing complete all as specified and directed.

S&F GI tubing 20mm bore medium grade with all fittings and fixed to wall with clamps including taking up or down existing GI tubing complete all as specified and directed.

S&F in repairs grating doom 125mm dia of PTMT (minimum weight 40gms) with waste hole complete all as specified and directed.

S&F grating doom with waste hole 125mm dia of chromium plated complete all as specified and directed.

S&F in repairs Waste fittings, 32mm brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair 15mm bore ball valves, high pressure of PTMT with epoxy coated aluminum rod & high dencity plastic ball screwed for iron pipe and fixed (Min weight 15mm-142 gms) complete all as specified and directed.

S&F in repair 20mm bore ball valves, high pressure of PTMT with epoxy coated aluminum rod & high dencity plastic ball screwed for iron pipe and fixed (Min weight 20mm -210g) complete all as specified and directed.

S&F in repair toilet paper holder complete all as specified and directed. Make:- Prayag Cat part No BA-48 or equivalent.

S&F in repair health faucet of 15mm bore brass cromium plated including PVC pipe to connection GI tubing 15mm bore complete all as specified and directed. Make:- Prayag cat no BEA-40 or equivalent.

S&F in repairs plastic water closet seat, back, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs soap dish, CP 125mm size fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F in repairs cabinet mirror 400x 500 mm for bathrooms complete all as specified and directed. Make: Prayag Cat Part No 551 equivalent.

S&F in repair glass shelf 500x125mm with brackets complete all as specified and directed. Make:- Prayag Cat No BEA-45 or equivalent.

S&F in repair corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. Make: Prayag cat No BEA 44 or equivalent.

S&F in repairs towel rail brass chromium plated fixed with and including chromium plated brass screws and wooden/ plastic cleats complete all as specified and directed. Make:- Prayag Cat No BA 40 or equivalent.

Dismantling of timber fillets under 40 Sq cm in section as in framed work for water stagings over roof top complete all as specified and directed.

M&L for framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500ltr capacity hoisted and fixed in position including dismantling as specified in SSR Part I complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000ltr capacity hoisted and fixed in position including dismantling as specified in SSR Part I complete all as specified and directed.

S&F in repairs stainless steel kitchen sink 1.00 mm thick with plug, waste pipe, washer including brackets connecting union to pipe including bedding in CM to wall or including fixing cantilever bracket over all size 495x460mm with bowl size 410x330x160mm complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall with necessary clamps complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall with necessary clamps complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius for 110mm bore complete all as specified and directed.

S&F in repair PVC (SWR) bends any radius for 75mm bore complete all as specified and directed.

S&F in repair PVC (SWR) branch piece single Y equal or unequal for 110mm bore complete all as specified and directed.

S&F in repair PVC (SWR) branch piece single Y equal or unequal for 75mm bore complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, double Y equal or unequal for 110mm dia bore complete all as specified and directed.

S&F in repair PVC (SWR) branch piece, double Y equal or unequal for 75mm dia bore complete all as specified and directed.

S&F in repair PVC (SWR) vent cowl 75mm bore complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for cheqeured tiles 300 x 300 x 25mm thick, rubber finished, set jointed and pointed in neat and cement slurry in floors with grey cement and pigment including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and directed.

M&L for cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) as in roof kerbs or mud stops, steps, rounded or chamfered on edges complete all as specified and directed.

M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate), as in plinth protection and finishing surfaces even & smooth without using extra cement laid in alternate panels complete all as specified and directed.

M&L for preparation of new steel surfaces of any description not otherwise described, exc 10cm width or girth & applying with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.71,800.00]

chronicle enterprises

Meet Road Lines

M/s Rahul Traders

Bidder Name

Meet Road Lines

chronicle enterprises

M/s Rahul Traders

M/s DS Khekde