Special Repair to Bldg No P-212 OR Md Accn at Mil Stn Dappar under GE (P) Dappar

Amount

B/R Portion

Dismantling of brick tiles or terracing tiles single layers on roofs complete all as specified.

Demolition of mud phuska on roof any thickness all as directed.

Roughening surfaces of old concrete floor/roof by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified.

M&L for 40 mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in roof padding, levelling course, including providing neat cement slurry @ 3Kg/Sqm including preparing slab surface with wire brushing complete and finishing top surface of PCC rough & even to receive the bedding layer including necessary formwork complete all as specified and as directed by Engr in charge

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified nd directed by Engr-in-Charge.

M&L for PCC 1:2:4 using 12.5mm graded stone aggregates, steps; seismic and other similar bands, plinth courses, string courses, parapets and copings, kneelers, apex stones, bed plates, kerbs , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed by Engr-in-Charge.

M&L for providing and laying 3mm thick APP (Atactic Polypropylene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyester matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealing all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength in longitudinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorized applicator of manufacturer of membrane only all as specified and as directed by Engr-in-Charge. Make : Sika/STP/Fosroc

M&L for 20-22mm thick precast plain cement concrete tiles type B-1, 1:2:4 (12.5mm graded aggregate) as in floorings, roofing set in cement mortar 1:4 over and including 15mm th screed bed in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed

M&L for cement plastering 15mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement plastering 5mm thick in cement mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement plastering 15mm thick in two layers in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc finished even and fair complete all as specified and as directed by Engineer-in-Charge. Note : WPC will be measured and paid separately.

Supply only integral liquid water proofing compound complete all as specified and directed. Make : Pidilite/Sika/STP/FOSROC/ACCOPROOF

Dismantling of existing geyser shed and refixing after repair and plaster work in same place, complete all as specified and as directed.

M&L applying 02 coats of interior emulsion paint preparation of newely plaster surfaces (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to new surfaces , over a coat of putty thickness vary from 1 to 1.5 mm over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

M&L applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats by using roller/brush to old wall surfaces , over a coat of putty thickness vary from 1 to 1.5 mm over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer Complete removal of existing treatment complete all as specified and directed. Make of Interior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Interior Emulsion : Asian (TRACTOR) / Berger (BISON) / Nerolac (BEAUTY SMOOTH)

M&L for preparation of newely plastered surfaces of ceiling and applying three coats of white wash complete all as specified.

M & L for preparing existing treated surfaces on ceiling including cornices and applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.

M&L applying 02 coats of exterior emulsion paint preparation of newely plaster surfaces (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to new surface of walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over a coat of wall putty thickness vary from 1 to 1.5 over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian (ACE) / Berger (WALMASTA) / Nerolac (SURAKSHA SUPERIOR)

M&L applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller/brush to old external wall surfaces walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over a coat of wall putty thickness vary from 1 to 1.5 over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer, including complete removal of existing treatment ocomplete all as specified and directed. Make of Exterior Wall Primer : Asian / Berger / Nerolac [Best Quality]. Make of Exterior Emulsion : Asian (ACE) / Berger (WALMASTA) / Nerolac (SURAKSHA SUPERIOR)

Demolition of cement concrete un-reinforced in ground floors and paving n.exc 15cm thickness below or above ground level complete all as specified.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing . Complete all as specified.

M&L 50 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) laid in alternate panel in floorings including finishing the surface even and smooth without using extra cement, as in plith protection, complete all as specifed.

Demolition of brick work built in cement mortar incl all quoins, arches, pillars, etc complete all as specified and directed by Engr-in-Charge.

M&L Brick work with sub class 'B' burnt bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L Brick work with sub class 'B' burnt bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 but except brick complete all as specified and directed by Engr-in-Charge.(serviceble Old bricks shall be reused after cleaning obtained from demolition).

Dismantling, floor, hearth or wall tiling including CM(bedding (but not backing), removing serviceable tiles to store & rubbish off the premises

Providing and Laying Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 600 X 300 mm and 7 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Dado should be flushed with the wall plastering. Make : Johnson (Digital HD Tiles) (Barstow DK/LT/HL for Toilets & Verona LT/HL for Kitchens) or equivalent from Kajaria/Somany as approved by AO

M & L for joint free non-Skid whilte ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border and the like works and flooring etc, 15-16 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

S&F in repairs vitreous china wash hand basin white flat back of size 580x450mm including brackets and CP waste coupling and making good to disturbed portion including PVC connection and PVC waste pipe etc complete all as specified and directed by Enge-in-Charge. Make:Parryware/Hindware/Cera

S&F CP bottle traps 32mm size with 250mm and 175/190mm long wall connection pipes and wall flanges complete fixed in position complete all as specified. Make : Jaquar (ALD-769L250X190) or Hindware (F850003)

S&F vitreous china premium/1st quality Orissa Pan water closet white colour of size 580X440mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and including provn of lime concrete bedding and taking down existing of any description/size includeing 600mm long body P trap fixed with IWC complete in all respect all as specified. Make : Cera (Calina S3010102) or Hindware (Orissa Pan Eco) equivalent from Parryware

S&F flushing cistern of PVC 10 ltr. cap. with dual flushing system, white colour, valveless syphonic action type, low level, with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. Make : Hindware (Sleek Essence Dual Flush) or Cera (Corona) or Prayag (Vintage) equivalent from Parryware

S&F in repair sheet glass shelf assembly consisting of 8mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

S&F in repair overhead shower 125mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified. Make : Cera (Cat No. - F7020103)/Jaquar/Marc/Prima

S&F in repair Bib taps, CP, fency type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series)/ Hindware (Contessa Plus Series)/ Cera (Ocean Series)/ Prayag (Neptune Series)

S&F in repair central hole brass chromium plated basin mixer with regular spout with/without popup waste system with 450 mm long braided hoses complete. Make : Jaquar (Continental Series)/ Hindware (Contessa Plus Series)/ Cera (Ocean Series)/ Prayag (Neptune Series)

M&L in repair for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed. Make : Jaquar (Continental Series)/ Hindware (Contessa Plus Series)/ Cera (Ocean Series)/ Prayag (Neptune Series)

S&F in repair Sink Cock wall mounted with swinging spout and with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed. Make : Jaquar (Continental Series)/ Hindware (Contessa Plus Series)/ Cera (Ocean Series)/ Prayag (Neptune Series)

S&F in repair Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series)/ Hindware (Contessa Plus Series)/ Cera (Ocean Series)/ Prayag (Neptune Series)

S&F in repair Angular Stop Cock, CP, fancy type with wall flange, chromium plated cast copper alloy screwed down, high pressure, screwed ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make : Jaquar (Continental Series)/ Hindware (Contessa Plus Series)/ Cera (Ocean Series)/ Prayag (Neptune Series)

S&F in repair stainless steel sink with drainage board, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460 with bowl size 410x 330 x 160 and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed. Make : Sink :- Nirali or Diamond or Neelkanth or Prayag

Supply and fixing in repair stainless steel plate rack of size 750x600x230mm fixed to wall complete as specified and as directed. Make : Sink :- Nirali or Diamond or Neelkanth or Prayag

S&F in repair towel rod CP 60 cm long between flanges and including all accessories like brackets/screws etc as recommended by manufacturer and complete fixed in position complete all as specified.

S&F in repair PVC connections 15mm size with brass nuts of length 450mm complete all as directed and specified.

S&F in repair cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified. Make : Prayag (FT-31M) or equivalent as approved

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified and as directed.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.

Taking up or down existing steel tubing and connections, 20mm bore complete all as directed and as specified.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as directed and specified.

Refixing 20mm bore GI steel water tubing medium grade fixed to walls complete all as specified.

Supply Fixing in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

Supply Fixing in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified.

S & F in repairs Ball 20mm brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed

S & F in repairs 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including disconnectiong of existing tank and removing to store.

M & L plain cement concrete 1:7:12 mix, type E-2 (using 40mm graded Brick aggregate) as in filling of sunken portion complete all as specified and directed.

M & L rendering 15 mm thick in cement mortar 1:3 , mixed with water proofing compound, on brick or concrete surfaces of wall of sunken portion, toweled to even and smooth finish without using extra cement with WPC paid and measured separately complete all as specified.

M & L applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm all as specified

M & L providing 25 mm dia GI pipe medium grade as in spouts 60 cm long complete all as specified and as directed.

S&F for MS Clamps, Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay) and similar small articles conforming to Fe-290 Gde-E-165 all as specified

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F in repairs PVC(HDPE) SWR RWP, 150 mm bore, single socketed in any length with rubber ring joints using solvent as per maunfacture instruction, fixed to walls complete all as specified and directed by Engr-in-Charge. Make : Astral / Prince / Finolex

S & F in repairs 150 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S&F in repairs PVC(HDPE) SWR , 40 mm bore, single socketed in any length with rubber ring joints using solvent cement as per manufacture instruction, including all fitting elbow, tees, sockets, bends etc. laid in walls & floors for connecting bottle traps & nahani trap complete all as specified.

M&L cast iron nahani/floor/multi floor trap 100 mm dia including jointing with solvent cement in repair fixed in cement concrete (1:2:4) type B1complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe,100mm bore, sand cast in any length, with or without ears, fixed to wall and making necessary connections, fixed as in repair complete all as specified and directed.

S&F Cast iron soil, waste and vent pipe,100mm bore, sand cast in any length, with or without ears, with lead joints, laid in trenches or in floors and making necessary connections, fixed as in repair complete all as specified and as directed.

S&F Cast iron soil, waste and vent pipe,75mm bore, sand cast in any length, with or without ears, with lead joints, fixed to walls/laid in floors and making necessary connections, fixed as in repair complete all as specified and directed.

S&F in repair CI Bends (any radius), for 75mm bore CI piipes diminishing pieces or tapers (larger bore measured) fitted with oval access doors complete all as specified.

S&F in repair CI Bends (any radius), for 100mm bore CI piipes diminishing pieces or tapers (larger bore measured) fitted with oval access doors complete all as specified.

S&F in repair cast iron junction combination 'T' equal or unequal for 100mm bore with access door as in repair complete all as specified.

M&L in repair for cast iron cowls of 100 mm dia complete all as specified and directed.

S&F CI gully traps, Centrifugal type 150 x 150mm size , square or round mouthed, type 'P' or 'S' fixed in repair complete all as directed and specified.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

M&L cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in chowkats complete all as specified and directed.

S&F factory made flush shutters 30 mm thick ply construction, BWP confirming to IS 2202, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match including supply and fixing following items : (a) MS medium weight Butt Hinges 100mm - 3 nos. per leaf (b) aluminium tower Bolt 200mm long - 2 nos per leaf (c) aluminium handles 150 mm - 2 nos. per leaf (d) aluminium Sliding door Bolt 300 mm - 1 no. per leaf (e) aluminium Floor Door Stooper 150mm long - 1 nos. per leaf Make (Flush Shutters) : Archidply or equivalent as approved. M/s DURA PLY/M/S GREEN PLY INDUSTRIES/M/S CENTURY PLY

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) and the supply and fixing following items: (a) MS medium weight Butt Hinges 100mm - 3 nos. per leaf (b) aluminium tower Bolt 200mm long - 2 nos per leaf (c) aluminium handles 150 mm - 2 nos. per leaf Make : M/s MP Wood product indore/M/s Jain Wood industries Delhi/Shre Krishna Industries Panchkula

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate fixed complete all as specified and directed.

Supply and fixing factory made extruded aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO

Supply and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified. Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified

M & L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. Make : Asian Paints/Berger/Nerolac

Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified.

M&L plain fillets as in 2nd class hard wood square rectangular in section wrought secured with screws sectional area exc 6 but n. exc 13 Sqcm. Complete all as specified and directed.

M&L Prelaminated particle board,18/19 mm thcik both side interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work

S&F Piano/continuous hinge of size 40 mm (when open) stainless steel complete all as specified.

S & F 150mm aluminium handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge

Supply and fixing for ISI Marked 150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed by the Engineer-in-Charge

S&F 125mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

Solid pvc Door Frame of size 50mmx47mm made out of 5mm plain colour PVC Sheet reinforced with MS Square tube , supplying & fixing in opeinging all as per specified and directed.

S&F factory made soild PVC Moulded Door Shutter, with particle board core 28mm to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick mouldedd PVC Sheet on the fron face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site all as per specified and as directed. (a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 3 nos per leaf. (b) Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Aluminium Handles 150 mm - 2 nos per leaf Make Sintex/Rajshri Plastiwood Ltd/M/s Dura Plast Gxtraction Pvt Ltd M/s Fenesta

S&F in repair harrison rails, 25mm dia mild steel, chromium plated with fixing brackets, stops, rollers etc, directed by Engr-in-Charge

M&L 100 mm thick Cement concrete type D2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring/ hard standing.

M&L Sand filling 25mm thick under floors or in foundations including watering and consolidation complete all as specified & directed.

M & L machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and no pigmentas specified & as directed by Engr-in-Charge.

E/M Portion

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.

Taking out existing sub main wiring of any description and size including earth wire incld wooden battens/ conduits/quities from stone/brick masonry walls, roofs, floors, etc. all as directed by Engr-In- Charge.

M& L Point wiring complete with 1.5 sqmm (nominal area) PVC insulated PVC unsheathed multistranded copper condutor single core cable 1100 volts grade, FRLSH, ISI marked drawn through and including heavy duty non metalic PVC conduit, ISI marked, not less than 20 mm dia of thickness 1.8 mm concealed in wall, roof, etc, with all connected fittings including pressed steel terminal boxes suitable for mounting modular switches, sockets etc and including PVC insulated and unsheathed multistranded single core copper conductor cable of size 1.5 sq mm green in colour as in earth continuity conductor connected to common earth dolly and all metal parts of fittings as specified and directed for the following:- Note:- Switches , sockets, ceiling rose, regulators etc shall be measured and paid separately. Quoted rate is deemed to be inclusive of cost of cutting chases in wall for incorporting PVC conduit and cost for making good to existing wall with CM 1:4 not exceeding 10 cm grith & painting same so as to match the existing wall.

(a) One light / fan / Bell point controlled by one switch

(b) One light point controlled by two way switch

(c) One 5 pin socket outlet independent 5 Amps

(d) One socket outlet 5 Amps on the same board with other switches.

(e) One 6 pin 5/15 Amps socket outlet independent with 2.5 Sqmm size copper conductor cable and 1.5 sqmm copper cables as earth wire.

M&L Sub main wiring with 2 runs of single core FRLSH PVC insulated unsheathed multistranded copper conductor cable size of cable 2x4 sqmm (line conductor) & 1x 4.00 sq mm (earth conductor). 1100 V grade drawing in & includingheavy duty non metalic PVC conduit, ISI marked, incl accessories not less than 25 mm in dia & concealed in wall, roof etc including PVC insulated, FRLSH unsheathed single core copper conductor cable, green in colour as in earth conductor including cutting charges for concealed conduit wiring etc and making good cutting not exceeding 10 cm grith complete all as specified and directed. Note : (i) Two runs of copper conductor cable and one run of copper earth wire including PVC conduit will be measured and paid as one unit only. (ii). Suitable size cable lugs copper fabricated will be measured in the quoted rate only. (iii). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate.

All as per above but in existing PVC conduit with single core FRLSH PVC insulated unsheathed multistranded copper conductor cable of size 2x1.5sqmm and 1 x 1.5 sqmm.

S&F Modular switch 10 A, 1 module type single pole 240 volts of Anchor Roma Urban Cat Pat Code No 66101 10AX, 1Way Switch,HSN Code 8536 or equivalent in Legrand/Schneider specified colour complete all as specified and directed by the Engr-in-charge.

S&F Modular socket with safety shutter 10Amps 2/3 pin combined 2 module 240 Volts of Anchor Roma Urban Cat Pat Code No 66403, HSN Code 8536 or equivalent in Legrand/Schneider in specified colour complete all as specified and directed by the Engr-in-charge.

S&F Modular socket with safety shutter 16Amps 2/3 pin combined 2 module 240 Volts of Anchor Roma Urban Cat Pat Code No 66404, HSN Code 8536 or equivalent in Legrand/Schneider in specified colour complete all as specified and directed by the Engr-in-charge.

S&F Modular switch 20 A, 1 module type single pole 240 volts of Anchor Roma Urban Cat Pat Code No 66104 20A, 1Way Switch, HSN 8536 or equivalent in Legrand/Schneider in specified colour complete all as specified and directed by the Engr-in-charge.

S&F modular cover plate with frame 2 module of Anchor Roma Urban Cat Pat Code No 66802SL, HSN 8538 or equivalent in Legrand/Schneider in specified colour complete all as specified and directed by the Engr-in-charge.

S&F modular cover plate with frame 3 module of Anchor Roma Urban Cat Pat Code No 668023L, HSN 8538 or equivalent in Legrand/Schneider in specified colour complete all as specified and directed by the Engr-in-charge.

S&F modular cover plate with frame 4 module of Anchor Roma Urban Cat Pat Code No 66804SL, HSN 8538 or equivalent in Legrand/Schneider in specified colour complete all as specified and directed by the Engr-in-charge.

S&F modular cover plate with frame 8 module of Anchor Roma Urban Cat Pat Code No 66808SL, HSN 8538 or equivalent in Legrand/Schneider in specified colour complete all as specified and directed by the Engr-in-charge.

S&F Modular Fan step regulator, 100W, 2 Module 240 volts of Anchor Roma Urban Cat Pat No 66502, HSN Code 841 or equivalent in Legrand/Schneider in specified colour complete all as specified and directed by the Engr-in-charge.

S&F Modular switch 2 way 10 A, 1 module type single pole 240 volts of Anchor Roma Urban Cat Pat No 66102 10AX, 2 way switch or euqivalent in Legrand/Schneider complete all as specified and directed by the Engr-in-charge.

S&F Modular Bell push 10 Amps 1 module 240 volts of Anchor Roma Unrban Cat Pat No 66103 or equivalent in Legrand/Schneider complete all as specified and directed by the Engr-in-charge. Make :

S&F Modular Metal Box 2 module and complete all as specified and directed by the Engr-in-charge .

S&F Modular Metal Box 3 module and complete all as specified and directed by the Engr-in-charge .

S&F Modular Metal Box 4 module and complete all as specified and directed by the Engr-in-charge .

S&F Modular Metal Box 8 module and complete all as specified and directed by the Engr-in-charge .

Supply and fixing in replacenment Modular Angle holder Cat Pat No 39935 of Anchor Equivalent/Havells/SSK with insulated body with back plate for LED lamps all as specified and directed by the Engr-in-charge .

Supply and fixing in replacement LED lamp 9 watt, retrofit all as specified and directed by Engr-in-charge complete.Make Havells/Philips/CG

S&F in replacement LED tube light fittings 1 x 20 W, 230V, complete with all accessories internally prewired and including connecting up with twisted flexible PVC copper conductor cable of 23/0.0076 from ceiling rose all as directed by Engr-In- Charge.

Supply and fixing in replacement ceiling rose bakelite, 63.5mm 3 terminals with base plate ISI marked, complete all as specified and directed by Engr-in-Charge.

S&F Sheet metal enclosure DB vertical TPN distribution board, double door, IP 43 class, including suitable size copper bus-bar, 415V, 4 Way with shrouded neutral bar, earth bar and incld. cable ties and suitable size blanks, including taking down of existing sheet metal enclosure complete all as specified and directed. NOTE - (a). Cost of suitable size cable lugs and materials required for flush fixing of DB is deemed to be included in the quoted rate. (b). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate. Make : Legrand/ABB/Schenider

Supply and fixing in replacement MCB SP 6 -32 Amps,10 KA,,'C' series 240 V ISI marked.complete all as specified and directed by Engr-in-Charge. Make: Legrand/ABB/Schenider

S&F Sheet metal enclosure MCB SPN distribution board, double door, IP 43 class, including suitable size copper bus-bar, 240V,12 Way with shrouded neutral bar, earth bar and incld. cable ties and suitable size blanks, including taking down of existing sheet metal enclosure complete all as specified and directed. NOTE - (a). Cost of suitable size cable lugs and materials required for flush fixing of DB is deemed to be included in the quoted rate. (b). Cost of cutting chases in wall for flush fitting of DB and making good to wall with CM 1:4 and painting the same in order to match the same with the existing wall all to the satisfaction of Engr-In- Charge is deemed to be included in the quote rate. Make : Legrand/ABB/Schenider

Supply and fixing in replacement thermal magnetic adjustable type MCCB 63 Amps ,16 KA, 'C' series 415. V ISI marked.complete all as specified and directed by Engr-in-Charge. Make: Legrand/ABB/Schenider

Supply and fixing in replacement MCB SPN 06-32 Amps,10 KA 'c' series 240 V ISI marked.complete all as specified and directed by Engr-in-Charge. Make: Legrand/ABB/Schenider

Supply and fixing in replacement MCB DP 40 Amps, 10 KA 'c' series 240 V ISI marked.complete all as specified and directed by Engr-in-Charge. MAke: Legrand/ABB/Schenider

Supply and fixing in replacement mirror light fitting LED 10W, 230 V, 2ft all as per Crompton Make Cat No. - LCL-14-CDL or equivalent in Philips/Wipro complete all as specified and directed by Engr-in-Charge.

Supply and fixing in replacement Bulk Head LED 10W, 230 V, 2ft all as per Crompton Make Cat No. - LBHE-10-CDL or equivalent in Philips/Wipro complete all as specified and directed by Engr-in-Charge.

M&L for Taking down ceiling fan and connected cables removing into safe place and Re-Fixing ceiling fan and connecting up including provision of cable from ceiling rose to fan complete all as specified and directed by Engr-in-Charge.

M&Lin replacement bell Ding Dong AC, 230 V single pole all as specified

M& L Earthing complete by using GI wire as earthing lead and MS galvanized earth plate of size 60 cm x 60 cm x 6.3 mm as earth electrode surrounded by charcoal and salt, buried directly in ground vertically in pit of depth not less than 2.25 meter below the ground with top edge of the earth plate at a depth of less than 1.5 mtr below ground level surounded from all sides with mixture of charcoal dust and common salt in alternate layers and electrode connected to galvanized iron wire 4 mm dia by means of bolts, nuts, checknuts and washers of galvanised iron connected iron connected to main switch board or main control board all as shown in electrical plate No 3 of SSR 1991. Pt I and including necessary exc. and earth work. The rate also include testing, 20mm bore light grade GI pipe for watering, funnel, wire mesh, PCC chambers in cement concrete (1:3:6) type CI 40 mm thick RCC(1:2:4) type B-1 cover and CI frame etc.complete all as specified and directed by Engr-in-Charge.

Removing existing unserviceable Multi-meter box along with its enclosure, old wiring in between DB's/main switch/meter and S & F anti corrosive, dust proof, vermin and water proof, factory fabricated sheet metal wall mounted type Multi-meter box of size not less than 1.25m x 1.0m x 0.25m with 2mm thick CRCA sheet and including applying of two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer of colour as approved by Engr-in-Charge suitable to accommodate and comprising of following :- (a). Removing and re-fixing electric energy meter - 4 Nos. (b). Wiring with PVC insulated unsheathed ISI marked 2 runs of 6 sqmm and single run of 4.0 sqmm, as earth continuity, single core multi stranded copper conductor cable fixed to meter box with PVC tag connected in between incoming DB and electric meters etc complete all as specified and directed. (c). Space for accomodation of MCCB TPN DB 6 way - 01 No. NOTE - (a). The metering box must have 1 No. Dia. 32 mm incoming Cable entry hole with Gland provided at base and 4 Nos. Dia. 16 mm Outgoing cable entry holes with Gland. (b). The Multi-Meter Box should have 04 Nos. viewing windows made out of toughened glass of 5 mm thickness strategically placed so as to view the energy meter readings without opeing the door of the meter box and shall be fixed from inside of the cover of Multi-meter box with stainless steel frame (glass holder)with suitable rubber gasket from inside the cover, so that it can withstand weather effect. (c). The system shall be A.C. Single phase 250 V or three phase, four wires, 433 V, 50 Hz with effectively grounded neutral. (d). The box must include of accessories like hinges, clamp, handles etc. (e). Multi-Meter box shall be so constructed so as to have roof tapering down for easy flow of rain water. (f). It should have locking arrangement by way of sealing and can be opened without breaking. Locking arrangement shall be such that a Lock with Key for locking of Multi-Meter Box to be provided. (g). The door in closed position should be overlapped on base such that direct entry of screwdriver, tool or film is not possible. (h). The contractor has to furnish a detailed dimensional drawing showing clearly the dimensions and material of Multi-Meter Box and its constructional features for approval fro Engr-in-Charge prior to manufacturing the same. (j). Sign of danger shall be clearly and indelibly embossed (not printed) on the cover of the Multi-meter box.

S&F LED building security light, pressure die cast aluminum housing, 15 watts capacity, 240V, IP 65 class, with suitable in-built electronic driver complete incld. fixed on a bracket made out of 1.5 mtr long Med grade GI pipe 40 mm dia bend to shape as directed fitted on wall at a height not less than 6 mtr from ground with MS clamp, nuts and bolts and washers as required at site and incld. connecting luminarie to the nearest ceiling rose/junction box with 1.5 sqmm PVC insulated 3 core wire complete all as directed and specified by Engr-in-Charge of make Crompton Greaves cat part no - LSTS-15-CDL OR Equivalent in Philips/Wipro. NOTE - Cost of all minor spares and jobs required for fixing of light fixture on wall and for electrical connections are deemed to be included in the quoted rate.

Taking down existing unsv cable and Material & Laying XLPE UG insulated, armoured heavy duty electric cable in repair with aluminium conductor multi stranded, 1100 volts , 3.5 core 35 Sq mm .Make-Havells/Polycab/Nicco

Excavation in trenches in soft/loose soil n exc 1.5m wide andn. Exc1.5m deep and getting out includingforming bottom surfaces to required level or slope for taking out embeded cables,brick/pcc protective tiles and relaying new/old cable complete all specified and all as directed by engineer incharge.

M&L sand cushioningng (drysand) to under ground cable for cable protection provided with layers 8cm deep before laying and 15 cm after laying the cable complete all as specified and directed.Note :- Punned thickness will be measured only.

M&L precast concrete cable cover, class LV, type 1 with peak, size 250mm x 150mm x 40mm.

Removal of surplus excavated soil to a distance exc 50 m but not exc in 100 m and deposited where directed at a level n'exc 50 m above the starting point complete all as specified and directed.

Returning filling in soft/ loose soil in trenches including spreading, leveling watering and well ramming in 25mm thick layer complete all as specified and as specified.

Supply and fixing 40 mm dia 'light grade', galvanised pipe with all fitting; laid in trenches/ passing through roads/drains alongwith cutting and making surface good with existing surface all as directed by Engr-in-charge.

M/S Gurpreet Singh

M/S Mahal Enterprises

Supreet Associates

Neelkanth Engineers