GE 861 EWS-26 (T)/2025-26

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Demolition of cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick blow or above ground level complete all as specified and directed by Engineer-in-Charge.

Dismantling of CGI/PGI Sheet fixed with screws as in roof covering complete all as specified and directed by Engineer-in-Charge.

M&L Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ Cladding to wall, fixed with self tapping screws as specified complete all as specified and directed by Engineer-in-Charge.

M&L Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/Cladding to wall, Ridge and eaves board, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge.

M&L 25mm thick Cement concrete type B-0,1:2:4 (using 12.5mm graded crushed stone aggregate) complete all as specified and directed by Engineer-in-Charge.

M&L 75 mm thick PCC 1:3:6 Type C-2 (using 40 mm graded crushed stone aggregate) as in sub-floor, sub-base, floor and pavings, etc. complete all as specified and directed by Engineer-in-Charge.

M&L Non Skid joints free ceramic coloured tiles (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

M&L Coloured glazed ceramic coloured tiles in vertical surfaces 450x350x 7 mm thick set over and including 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards /slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.

M&L 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame complete all as specified and directed by Engineer-in-Charge.

M&L 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in wall with nails to timber frame complete all as specified and directed by Engineer-in-Charge.

Dismantling of unframed timber scantling under 40 Sqcm, fixed in any position in fillet rails, posts rafters purlin etc complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class soft wood (Kail) in scantling clean sawn and fixed complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails n exc 3 Sqcm bull, splayed, chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge.

S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails exc 3 Sqcm and n exc 6 Sqcm bull, splayed, chamfered or rounded on one edge or face complete all as specified and directed by Engineer-in-Charge.

Taking down wooden frame not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

Taking down wooden frame exceeding 1.5 Sqm but not exceeding 4.0 sqm each (Without taking off shutters from the frames) complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium (powder coating of any colour (Thickness or powder coating not less than 50 micron) door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified and directed by Engineer-in-Charge.

S&F Anodised aluminium (powder coating of any colour (Thickness or powder coating not less than 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed by Engineer-in-Charge.

M&L for 5.5 mm thick frosted sheet glass, ordinary quality and glazing with brass screws in square exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.

M&L for pre-laminated 9mm thick particle board interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screw to timber framework or fixed in ceiling complete all as specified and directed by Engineer-in-Charge.

S&F of solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube as per specification and drawing given in clause 8.B.3 of SSR -2010 (Part-II Rates) complete all as specified and directed by Engineer-in-Charge.

S&F factory made solid panel PVC door shutter 30 mm thick (stiles) consisting of frame made out of mild steel tubes for top & bottom rails. Mild steel frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20 mm with stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement fixing in the frame at site as per specification ,drawing complete all as specified and directed by Engineer-in-Charge.

S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed by Engineer-in-Charge.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed by Engineer-in-Charge.

S&F 150 mm long extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 300 mm MS ordinary rat rail rod pattern spring including roller and plate complete all as specified.

M&L preparation of old surfaces and applying one coat of cement base paint complete all as specified and directed by Engineer-in-Charge.

M&L preparation of old surfaces and applying two coat of white wash on wall complete all as specified and directed by Engineer-in-Charge.

M&L Preparation of old painted steel surface of any description, and applying a coat of synthetic enamel paint over 10cm in width or girth, not otherwise described complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old wooden surface of any description not otherwise described over 10cm width or girth and applying one coats of synthetic enamel paint to match the existing surfaces complete all as specified and directed by Engineer-in-Charge.

S&F in repair stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engineer-in-Charge.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed by Engineer-in-Charge.

S&F medium grade GI tubes with all fitting and fixed complete to wall and ceiling or laid in floor 15 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F medium grade GI tubes with all fitting and fixed complete to wall and ceiling or laid in floor 20 mm bore complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15mm Bib Taps with wall flange of chromium plated fancy type long shank screwed for Iron Pipe or for brass ferrule complete all as specified and directed by Engineer-in-Charge.

S&F in repairs stop valves/angle valves for 15 mm bore of pipe cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 15 mm bore fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Vitreous China wash down water closet (Squat pattern) white complete as fixed in repair excluding flushing cistern and flush pipe "Orissa" pattern size 580x440 with integral footrest inject connection to trap antisyphonage etc complete including joint between flushing pipe and socket of WC complete all as specified and directed by Engineer-in-Charge.

S & F Vitreous Ware wash down water closet (Pedestal), white (EWC) and fixed in repairs including seat cover with brass screws and excluding flush pipe and flushing cistern complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china wash basins, size 550x400mm white flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm waste fittings, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.

S & F in repairs PVC Low level flushing cistern 10 Ltr capacity including all fittings such as flush pipe brackets complete all as specified and directed by Engineer-in-Charge.

S&F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe , flush pipe and waste pipe) complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC connection of 15 mm bore and 450 mm long with brass check nut and union etc complete all as specified and directed by Engineer-in-Charge.

M&L for PVC (SWR) multi floor trap diameter of outlet 75 mm with openable grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Brass Chromium plated tubular towel rail, 20 mm dia., D Type, 60 cm long between flanges complete all as specified and directed by Engineer-in-Charge.

S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 125 metre long flexible tube and ABS wall hook Including making connections and fixed in position complete all as specified and directed by Engineer-in-Charge.

S&F Brass in repairs CP mixer for mixing hot & cold water screwed down for 15mm iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.

Taking down carefully aluminium/copper point wiring (light fan socket or power) complete with fitting such as switches, tube lights, ceiling rose, pendants, regulators, MCB DB, MCB'S, Main switch from control board and making good disturbed surfaces of walls, floor to match with existing and keeping items aside in safe custody for reuse such as regulators, light fitting, MCBs complete all as specified and directed by Engineer-in-Charge.

M & L for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr in Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified.

All as per srl item No-57 here in above but for one 3 pin 5A socket outlet independent controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as per srl item No-57 here in above but for one 5A socket outlet on the same board controlled by one switch complete all as specified and directed by Engineer-in-Charge.

All as srl per item No 57 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm complete all as specified and directed by Engineer-in-Charge.

Supply & fixing for switch socket combination 2 in 1, 3 Pin 5 amps flush type, universal 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply & fixing for switch socket combination, 2 in 1, 3 pin 5 and 15 amps flush type, universal 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed by Engineer-in-Charge.

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed by Engineer-in-Charge.

Supply & fixing for socket outlet 2 in 1, 3 Pin 5 amps flush type, universal 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply & fixing for socket outlets 3 pin 15 amps flush type, universal 230 volts complete all as specified and directed by Engineer-in-Charge.

Supply and fixing stepped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified and directed by Engineer-in-Charge.

Supply & fixing of ceiling rose, 3 phase/PVC/polycarbonate isolated body complete all as specified and directed by Engineer-in-Charge.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed by Engineer-in-Charge.

S&F in replacement decorative ultra slim linear LED 18 Watt 4' long lighting fixture White/ Warm colour with extruded al heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up three copper flexible cable from ceiling rose to fittings including connecting up and fixed on including two nos PVC square box of required size complete all as specified & directed.

Supply and fixing LED lamp 7 W complete all as specified and directed by Engineer-in-Charge.

Supplying and fixing in repair/ replacement round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

All as item No 72 above but 12 Watt complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair/replacement ceiling fan complete with blades, down rods, electronic regulator and accessories, 230V, 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00, BEE 5 star rated with brushless direct current motor (BLDC) including down rod not less than 300 mm and connection with three core copper wire etc, complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repair/replacement exhaust fan made of sturdy engineering plastic complete with louvers shutters, voltage 230V, 50 Hz RPM 1200, copper winding of sweep 250mm including necessary work in wall/sheet, including connection cable of suitable size, nut bolt and other fixing material, complete all as specified and directed by Engineer-in-Charge.

Disconnectiong, taking down, strip opening, cleaning all parts and packing of ceiling fan of any make and size & greasing ball bearing with specified quality grease & recommissioning the same including making new electric flexible wire connection, complete all as specified and directed by Engineer-in-Charge. NOTE: Replacement of spare parts, rewinding, painting etc to be measured and paid separately.

S&F in Replacement of short circuit/over-heated windings from starter of ceiling fan of any make having 1200/1400mm sweep with matching gauge & turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking, heating, drying, cleaning fan bearing/bushes, greasing, oiling and reassembling of fan with testing etc, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of short circuit/over-heated windings from starter of exhaust fan of any make having 300mm/350mm/450mm sweep with matching guage & turns of super enamelled copper winding wire complete with leathered paper, glass sleeves, varnishing, baking, heating, drying, cleaning fan bearing/bushes, greasing, oiling and reassembling of fan with testing etc. complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of gun metal bush with suitable size for ceiling fan any make any size and any sweep complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of ball bearing suitable for 1200mm/1400mm sweep ceiling fan of any size any make complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of approved quality connector block of ceiling fans of suitable size, complete all as specified and directed.

S&F in replacement of capacitor 2.5 mfd AC 230 volts 50 Hz, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of ball bearing suitable for 300mm/450mm sweep exhaust fan, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of capacitor 3.15 mfd AC 230 volts 50 Hz, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair/replacement Electric water heater storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 ltr, BEE 5 star rated complete with all accessories such as safety valve, thermosat, NRV, connection piece etc, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Heating element AC 230 Volt of rating 1500W ISI mark as per existing any type, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Heating element AC 230 Volt of rating 2000W ISI mark as per existing any type, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Thermostat switch AC 230 Volt adjustable range from 0-90 degree Celsius, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of flexible PVC connection pipe heavy duty suitable for hot water to bear the temperature 100 degree Celsius with out let and inlet connection brass adaptor and PVC washer having size 450 mm long 15 mm nominal dia complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of auto-cut switch suitable for geyser 25-50 ltrs 230 volts AC all as per sample, complete all as specified and directed by Engineer-in-Charge.

S&F in replacement three core cable 1100 volt grade having size 40/0.0076 copper conductor multi stranded, complete all as specified and directed by Engineer-in-Charge.

Taking down water storage heater of capacity 25/35/50 ltr from the site and opening base plate assembly and removing all sludge and scaling from the inner tank and refixing the the base plate assembly with and including minor spares such rubber gasket, piece of wire etc, complete all as specified and directed by Engineer-in-Charge.

S&F in repair inner tank assembly made of copper suitable for 25 ltr storage type water heater with and including nuts, bolts and washer and fusible plug, complete all as specified and directed by Engineer-in-Charge.

S&F in repair inner tank assembly made of copper suitable for 35 ltr storage type water heater with and including nuts, bolts and washer and fusible plug, complete all as specified and directed by Engineer-in-Charge.

S&F in repair inner tank assembly made of copper suitable for 50 ltr storage type water heater with and including nuts, bolts and washer and fusible plug, complete all as specified and directed by Engineer-in-Charge.

S&F in repair glass wool for insulation purpose in any make and any capacity storage type water heater complete all as specified and directed by Engineer-in-Charge.

S&F in repair outer body including upper and lower cover and inspection plate made of MS sheet duly painted with super enamelled synthetic paint over a coat of steel primer suitable for 25 Ltr storage type water heater, complete all as specified and directed by Engineer-in-Charge.

S&F in repair outer body including upper and lower cover and inspection plate made of MS sheet duly painted with super enamelled synthetic paint over a coat of steel primer suitable for 35 Ltr storage type water heater, complete all as specified and directed by Engineer-in-Charge.

S&F in repair outer body including upper and lower cover and inspection plate made of MS sheet duly painted with super enamelled synthetic paint over a coat of steel primer suitable for 50 Ltr storage type water heater, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair, Plug top 3 pin 5/6 amps 230 volts, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair Plug top 3 pin 15/16 amps 230 volts, complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair PVC Gang box surface type suitable for fixing of 5 pin 5 Amp multipurpose switch socket on wall complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair PVC Gang box surface type suitable for fixing of 5 pin 15 Amp multipurpose switch socket on wall complete all as specified and directed by Engineer-in-Charge.

S & F in repair/replacement 30 Watt LED Flood light fitting 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair/replacement sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed by Engineer-in-Charge.

All as item No 105 above but 4 way complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repair/ replacement MCB, SP, AC, 240 volts "C" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and directed by Engineer-in-Charge.

Supply & fixing repair/ replacement MCB, SPN (Double Pole), AC, 240 volts, C series capacity 32/40 Amps 10kA and making connections complete all as specified and directed by Engineer-in-Charge.

M&L for sub main wiring with two single core PVC FRLS insulated flexible copper conductor cable of size 4 sqmm and one single core PVC FRLS insulated flexible copper conductor cable green colour of size 4 Sqmm as earth lead in surface PVC casing capping medium grade ISI marked cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed by Engineer-in-Charge.

M/S MOHD SHABAN SHEIKH (BID ID -3349770)

M/S NEW JOHAN TRADERS (BID ID -3359149)