Loading
Loading…
Loading…
Tender Value
₹14.5 L
EMD Value
₹29,019
Closing Date
10 Jun 2026, 2:00 pm4d left
E.E.C.P.-1
Executive Engineer, C.P. Division No.1, 4th Floor, Deluxe Building Sec 9, Chandigarh
SPECIAL REPAIR FOR R.B. HIMALYA, ARAVALLI HOSTELS IN CAMPUS OF PEC IN SECTOR 12, CHANDIGARH FOR THE YEAR 2026-27 UNDER THE CONTROL OF S.D.E. C-6, SECTOR 12, CHANDIGARH.
2026_CHD_92961_1
CP1/2026/2816370
Open Tender
Civil Works - Buildings
180 days
Chandigarh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹29,019
3 Jun 2026
3 Jun 2026
10 Jun 2026
3 Jun 2026
10 Jun 2026
3 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||||
| 1.01 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm
nominal size derived from natural sources) (DSR 4.1.10) | 5 | cum | 6,342.6 | ₹31,713 |
| 2Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: | |||||
| 2.01 | Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR 6.1.1) | 8 | cum | 7,171.64 | ₹57,373.12 |
| 3Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: | |||||
| 3.01 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (DSR 9.21.2) | 80 | sqm | 2,328.05 | ₹1,86,244 |
| 4Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : | |||||
| 4.01 | 250x16 mm (DSR 9.96.2) | 80 | Nos. | 253.56 | ₹20,284.8 |
| 5Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : | |||||
| 5.01 | 250x10 mm (DSR 9.97.2) | 60 | Nos. | 112.04 | ₹6,722.4 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.30 MB
BOQ_113784.xls
BOQ • 0.35 MB
Download all tender documents and submit your bid