Construction of cylinder store on roof of Bio technology department

Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 meters lead.upto floor V level.

Demolishing mud phaska in terracing and disposal of material within 50 meters lead upto floor V level.

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design. In 75x75 mm deep chase. upto floor V level.

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth superstructure above plinth level upto floor V level including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) upto floor V level.

Brick work with 2nd class bricks of class designation 75 in foundation, plinth & in Superstructure in cement mortar 1:4(1 cement : 4 coarse sand) upto floor V level.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) upto floor V level.

15mm Cement plaster on the rough side of single or half brick wall of mix: CEMENT PLASTER (IN COARSE SAND) upto floor V level.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.1 mm thick upto floor V level.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer upto floor V level.

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) upto floor V level.

Painting with synthetic enamel paints of approved brand & manufacture of required colour to give an even shade Two or more coats on new work upto floor V level.

Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms.upto floor V level.

Providing steel thermo mechanically treated bars conforming to IS:45612000 reinforcement for all RCC work including bending, binding and placing in position complete including cost of cold twisted steel reinforcement and binding with 18-20 gauge, soft drawn concealed steel binding wire complete as per specifications and drawings(upto height of floor V level). Fe 500 D upto floor V level.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes upto floor V level.

Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required upto floor V level.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.upto floor V level.

Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls and making Good the same/earth work in trenches etc.Medium grade upto floor V level. A. 25 mm dia. nominal bore

b. 32 mm dia. nominal bore

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) a. 20 mm dia. nominal bore

b. 25 mm dia. nominal bore

c. 32mm dia. nominal bore

P/F Ball valve(Fully wayvalve) made of Cast brass including Handle (Ship/DRPmake) upto floor V level. A. 25 mm dia. nominal bore

b. 32mm dia. nominal bore

Mazdoor actual engaged at site for clearing the site 2nos for5 days

Engage Tractor Trolley along with labour for loading and unloading and Disposal of Unserviceable material outside the university campus as directed EIC