REPAIRS TO ROAD SIDE PATH CULVERT DRAIN AND CERTAIN MISC WORKS AT AFS RAJOKRI UNDER GE (AF) GURGAON

Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified.

M&L for 100 mm thick Cement concrete type C1, 1:3:6 (using 40 mm graded aggregate) in foothpaths and hard standing finish even and fair without using extra cement complete all as specified and directed.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified.

M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified.

M&L Non-skid coloured Endura outdoor tiles 18-20 mm thick (Square/rectangular) of each tile exc 0.06 Sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slury and pointed in coloured cement and pigment to match the tiles complete all as specified and as directed.

S&F in for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M&L chequered cement concrete coloured tiles 30cm x 30 cm x 25mm, set jointed and pointed in neat cement slurry in floors with grey cement and pigment complete all as specified.

M&L for Sand (M Sand) filling under interlocking tiles or in foundations, spread and levelled including watering and consolidation complete.

M&L for cement concrete type B0 1:2:4 (using 12.50 mm graded stone aggregate) as in coping benching, gola, slightly rounded and similar items complete all as specified.

M & L for hard core of gauge n exc 63mm, deposited spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surface.

M&L for plain cement concrete type-C2 1:3:6 (40mm garaded agg.) in surface channel and drains complete all as specified and directed

Extra for forming fair finished drain or channel exc 30 cm but n exc 50 cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred / stopped ends etc, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred / stopped ends etc, complete all as specified and directed.

Cleaning surface drains of depth n exc 1.00m depth, of width n exc 1.0m, and removing the deposited soil, clogged mud, vegitation musk earth soil etc to a distance not less than 5kmtrs etc complete all as specified and as directed

M & L for 38mm wide glass dividing strips, 3mm thick, inserted in position, conforming to design

S&F in repair steel rolling shutter of thickness 1.25 mm without ball bearing as specified including top cover , anchoring rod , hasp and staple and one shop coat of primer erected in position, gear operated type with bevel gear box and crank handle complete all as specified.

M&L for removing the steel gates with or without removing the gate pillars and re-fixing the gates to the existing or new pillars by changing the location of the hinges through necessary cutting and rewelding /re-fixing the hinges, aldrops, stoppers etc complete all as specified and as directed

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws as specified & directed.

Dismantling MS steel work of any descrption not other wise provided for complete all as specified and as directed

S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confirming to Fe 410-S complete all as specified.

S&F steel work as in tubular, rafters, purlins, posts and similar work (round/sqare/rectangular shape of pipes as approved by Engr-in-charge ) trusses of any shape up to height 6 mtr including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240

Dismantling post/struts (wood,steel or RCC) of any section embedded in concrete including taking out embedded portion and making good disturbed ground complete all as specified and as directed

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Excavation in Post Holes ( or similar holes) each not exceeding 0.5 Cum and getting out in hard/dense soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed

M&L for providing PCC 1:3:6, type C2, using 40mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed

S/F Joist, channel, angle or tee sections, post fixed independently, without connecting plates, etc(cut to ordinary lengths i.e within 20mm of the length indicated quality conforming to Fe 410-W(gde-E-250)quality-A

S&F for MS flat iron fillets in posts and struts in fencing ,drilling holes (for securing wire mesh etc),including necessary drilling ,bolting or riveting etc confirming to Fe 410-0 or fe 310-0

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other,or screwed both ends,each screwed and to be fitted with washer and the hexogonel or square nut dia 5 to 10 mm not exc 5cm long complete all as specified and as directed

Fixing only chain link fencing including linewires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Supply only Chain link MS galvanisd fencing, any size or type

S&F MS round bar 10 mm dia fixed indepently including hooking ends for chain link fencing conforming to Fe 290 Gde E-165 complete all as specified and as directed

Taking down barbed wire fencing of any description and in any position fixed to RCC/steel posts complete all as specified and directed. (each row shall be measured separately)

S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

S&F in repair re-inforced punched concertina coil of 600 mm dia (chrome razer or blade wire) with barbed tape of 0.50 mm thick galvanised steel steel sheet or core wire of dia 2.5mm of high tensile steel wire including galvanised mild steel staple/clips for tying at crossing etc complete all as specified.

Supply and Fixing in repairs, SFRC manhole cover of size 600mm x 600mm x 70mm thick with frame set in cement mortar 1:4 complete all as specified and as directed. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete. (b) M/s KK Manhole.(c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame

Supply and Fixing in repairs, SFRC cover slabs of size 450mm x 450mm x 40mm thick with frame set in cement mortar 1:4 complete all as specified and as directed Notes-(i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete (b) M/s KK Manhole.(c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame

Demolition of Brickwork built in cement mortar including all quioins, arches, pillars etc complete all as specified and as directed .

Taking down cement or cement lime plaster on stone/brick wall, ceiling incl raking out joints, hacking for key, scrubbing down with water etc, including removal of rubbish outside MoD land and necessary scafolding complete all as specified and directed.

M&L for brickwork with subclass `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed

M&L for brick work with fly ash bricks old size straight or curved on plan exc 6.0 m mean radius built in cement mortar (1:4) complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:4 with water proofing compounding @3% by wt of cement on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified. Note: WPC shall be measured and paid seperately.

M&L for preparation of new surfaces of walls and applying Two coats of wheather proofing exterior acrylic emulsion paint over a coat of primer to be applied by approved applicator of the manufacturer of the paint and all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint on walls. complete all as specified.

Supply only Liquid Water Proofing compound complete all as directed. Make : Dr. Fixit

Supply and Fixing in repairs, SFRC drain cover of size 900mm x 600mm x 70mm thick laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete (b) M/s KK Manhole.(c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame

Supply and Fixing in repairs, SFRC drain cover size1200mm x 300mm x 70mm thick laid over existing drain complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Make of SFRC Manhole/drain cover and frame : (a) M/s PS Concrete.(b) M/s KK Manhole.(c) Or equivalent as approved by GE (ii) Contractor will provide manufacturer test certificate of SFRC cover & frame

Demolition of Precast cement concrete kerb stone in any floors and paving not exc 15 cm thick above or below ground level all as specified and as directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed.

M&L for preparation of new concrete surface and applying two coat of synthetic enamel paint exc 10 cm girth or width not other wise described over a coat of primer etc complete all as specified and as directed.

M&L for preparing new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed.

Please Enable Macros to View BoQ information