WB/APD/KMG/CGP-ET/05/25-26(2nd Call) Sl1

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

(A)Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by through saturation with water ,ramming complete including the cost of supply of sand .(payment to be made on measurement of finished quantity)

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand

(1)Cement concrete with graded stone ballast (40mm size excluding shuttering )in ground floor(2)Cement concrete with 30mm down graded shingles excluding shuttering N.B.variety.In ground floor (a)1:3:6 propotion

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (ii ) River Bazree

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a)For works in foundation, basement and upto roof of ground floor/upto 4 m(i) Tor steel/Mild Steel.II. Other than SAIL/TATA/RINL

Hire and labour charges for shuttering with centering and necessary staging upto 4m using approved stout props and thicks hard wood planks of approved thickness with required bracing for concrete slabs,beams and lintels curved or straight including fitting,fixing and striking out after completion of works(upto roof of ground floor)(a)25mm to30mm thick wooden shuttering as per decision of engineer-In-Charge.

Brick work with 1st class bricks in cement mortar (1:4)(a) In foundation and plinth

125mm thick brick work with 1st class bricks in cement morter (1;4)in ground floor.

Supplying,fitting and fixing 1st quality ceramic tiles in walls and floors to match with the existing work & 4nos. Of key stones (10mm)fixed with araldite at the back of each tile finishing the joints with white cement mixed with colouring oxide if requred to match the colour of tiles including roughening of concrete surface,if necessary or by synthetic adhesive & grout materials etc. (A)Floor with sand cement morter(1:4)20mm thick &2mm thickness slurry at back side of tiles using cement @2.91kg/sq.m & joint filling using cement slurry @0.20kg/sq.m.(a)Area of each tile upto 0.09 sq.m.

Supplying,fitting and fixing 1st quality ceramic tiles in walls and floors to match with the existing work & 4nos. Of key stones (10mm)fixed with araldite at the back of each tile finishing the joints with white cement mixed with colouring oxide if requred to match the colour of tiles including roughening of concrete surface,if necessary or by synthetic adhesive & grout materials etc. (B)wall with Sand Cement Morter (1:3)15mm thick &2mm thick cement slurry at back side of tiles using cement white cement slurry @0.20kg/sq.m.(a)Area of each tile upto 0.09sq.m(1)coloured decorative.

(A)M.S or W.I. Ornament grill of approved design joints continuously welded with M.S,W.I. Flats and bars of windows,railing etc.fitted and fixed with necessary screws and lugs in ground floor.(add extra @1%for each addl.floor upto 4th floor and @1.25%for each addl.floor above 4th floor)(1)grill weighting above 10kg/sq.mtr and upto16kg/sq.mtr.the weight of grill per sq.m will be determined by taking the physical weight of fabricated grill and diving the same by covered area of the same.

M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete.

Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). (i) In Roof:-a) With 0.5 mm thick sheet

Applig decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly(plastered or concrete surface)as per manufacturer's specification.In Ground floor:surface.(3)two coats.

Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor) (ii) With 1:4 cement mortar (b) 15 mm thick plaster

(A)Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc including using of approved putty etc the surface,if necessary.(b)On steel or other metal surface:With super gloss (hi-gloss)(4)Two coats (with any shade except white)

Supply fitting &fixing 1nos aquaguard stroage cooler cum purifier including fitting fixing complete

Earth work in filling in compound, tank, low land,ditches etc. with good earth, in layers not exceeding 150 mm. including breaking clods and consolidating the same by ramming and dressing complete. (Payment will be made on profile measurement before and after the work) (iii) With carried earth arranged by the contractor within a radius exceeding 3 km. but not exceeding 5 km. including the cost of carried earth

Supply fitting fixing of 1/2 hourse power water pump Make:Kirloskar

Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 500 litre capacity

Electrictification & display board

Cost of installtion of tubewell including connection with storage tank,purifier machine &all other necessary fittings

Add GST

Add Labour Welfare Cess