EEE/A/HandM/CLZ/22-23/TC/04.3

Amount

PART-A Repair of tipper truck DL-1GC 7540 CLUTCH DISC ASSY - 352 DIA

SRDG BRG

CLUTCH COVER ASSY 1.75 SPLINE

ASSY FLY WHEEL WITH FLY WHEEL RING

CLUTCH BOOSTER ASSY

GEAR BOX OIL

BRAKE FLUID (DOT 4) 500ML

GEAR TOP COVER REPAIRING

COMPLETE LABOUR CHARGE FOR OVERHAULING OF CLUTCH SYS AT SITE.

PART-B Repair of tipper truck DL-1GC 7540 REPAIRING OF SILENCER ASSEMBLY A:-COMPLETE DISMANTLING OF WORN OUT SILENCER ASSY WITH BROKEN PIPE AND REPLACE OF NEW SILENCER ASSY THROUGH ELECTRIC WELDING WITH NUT BOLT AND BRACKET. OPENING OF SILENCER CONVERTOR ASSY ANS CLEANING WITH PROPER METHOD AND REFITTING IN THE VEHICLE INCLUDING LABOURCHARGES.

PART- C Repair of tipper truck DL-1GC 7540 PROVIDING AND FIXING OF BATTERY 12 VOLT 100 AH (02 NOS) FOR VEHICLE NO DL 1G C 7540 TIPPER TRUCK AT CIVIL LINE ZONE WORKSHOP.

PART-D Repair of Tipper Truck DL-1GC 7532 CLUTCH DISC ASSY - 352 DIA

SRDG BRG

CLUTCH COVER ASSY 1.75 SPLINE

CLUTCH BOOSTER ASSY

GEAR BOX OIL

BRAKE FLUID (DOT 4) 500ML

GEAR TOP COVER REPAIRING

COMPLETE LABOUR CHARGE FOR OVERHAULING OF CLUTCH SYS AT SITE.

PART-E Repair of Tipper Truck 7622 CLUTCH DISC ASSY - 352 DIA

SRDG BRG

CLUTCH COVER ASSY 1.75 SPLINE

CLUTCH BOOSTER ASSY

GEAR BOX OIL TOP UP

BRAKE FLUID (DOT 4) 500ML

GEAR BOX SHIFTING WIRE

COMPLETE LABOUR CHARGE FOR OVERHAULING OF CLUTCH SYS AT SITE.

PART F Tipper Truck 7622 Purchase of self stater assy for vehicle no NO DL 1GC 7622 TATA tipper truck at CIVIL LINE ZONE WORKSHOP.

PART- G Tipper Truck 7622 (COMPLETE REPIRNG OF ENGINE OVERHEATING AND STARTING PROBLEM) Complete dismantling of radiator from the vehicle and clean up by the required cleaning liquid after opening the upper and lower tank. The radiator fins shall be clean with the help of wire and reassemble the upper and lower tank of radiator with the help brass/aluminum soldering. After cleaning the radiator fitted into the vehicle with replace of hose pipe set.the complete cooling sys of ehgine shall be clean and top up the coolant and start the engine for setting idle and full load condition.

Complete engine shall be tuning and setting with the help of software and replace idle and load speed sensor because of not pulling the load during the working condition. The ECM sys shall be open and repair and check on software with replace of complete wiring from ECM sys to FIP injector trail leakoff line with wiring. clutch paddle shall replacing of and setting of clutch adjustment. Complete meetring unit sys shall be repair and setting including labour charges.

PART-H GENERAL ITEM ( including GST@28%) READY PUNCHURE

SOLUTION TUBE

TUBE (LOADER FRONT) TYRE

PATCH FOR TYRE PUNCHURE

TUBE 14/25 REAR TYRE OF LOADER

PART-J LUBRICANT ITEM HYDROLIC FLUID (PRESSURE OIL)26 LITRE IN EACH TIN