Installation of power supply by erection XLPE aerial bunch cable from GM Complex Sub Station to A B C and D type quarters of GM complex colony and providing n fixing of service line for A B C D type quarters at GM complex colony of Johilla Area

Amount

PART A- Installation of power supply by erection XLPE aerial bunch cable from GM Complex Sub Station to A & B types of GM complex colony & providing & fixing of service line for A type & B type quarters at GM complex colony of Johilla Area.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 meter and upto 12.00 meter

Supplying and erection of stay set complete (galvanized) with19/20 mm dia X 1.8 meters long stay rod, anchor plate of size45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20mm X 60 cm ), 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Erection of pole top/ straight two wire/ V shape two wire, angle iron/ channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33KV as Required

Dismantling of over headlines comprising of copper/ aluminum overhead conductor, G.I. wire, cross arms, insulators etc. as required.

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying & drawing/laying of PVC insulated XLPE aerial bunch power cable conductor H2/H4 grade aluminium solid/stranded conforming to IS-14255- 1995, alu. alloy insulated messenger 1100 volts grade cable of approved make in air with necessary material as per specification of required size as mentioned below –3x95 sq.mm, 1x16(st. light),

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 4 core ISI marked with alu. stranded /solid conductor,4 core armoured,25 sq. mm

Supplying & fixing of aerial bunch cable accessories suspension clamp i/c required attachment for single core cable of approved make on pole with clamp, necessary material as per specification for required size.

Supplying &fixing of aerial bunch cable accessories tension clamp (dead end) i/c required attachment for single core cable of approved make in air with clamp, necessary material as per specification for required size

Supply of Clamp

Providing new LT Service line (all size ) at consumer premises for single phase connection

CMPS 07% of 25% of (Sr.No. 1.07 to Sr. N. 1.13)

PART B - Providing & fixing of Aerial Bunch XLPE cable & Service line for feeding power to “D” Type quarters at GM Complex Colony of Johilla Area .

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 meter and upto 12.00 metre

Supplying and erection of stay set complete (galvanized) with19/20 mm dia X 1.8 meters long stay rod, anchor plate of size45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20mm X 60 cm ), 7/ 3.15 mm dia G.I. stay wire and strain insulator in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying & fixing of aerial bunch cable accessories suspension clamp i/c required attachment for single core cable of approved make on pole with clamp, necessary material as per specification for required size

Supplying &fixing of aerial bunch cable accessories tension clamp (dead end) i/c required attachment for single core cable of approved make in air with clamp necessary material as per specification for required size.

Supplying & drawing/laying of PVC insulated XLPE aerial bunch power cable conductor H2/H4 grade aluminum solid/stranded conforming to IS-14255-1995, alu. alloy insulated messenger 1100 volts grade cable of approved make in air with necessary material as per specification of required size as mentioned below – 3x70 sq.mm, 1x16(st. light), 1x35(insulated neutral messenger)

Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core armored 35 sq. mm

Clamp

Providing new LT Service line (all size) at consumer premises for single phase connection

CMPS 07% of 25% of (Sr.No.2.04 to Sr. N. 2.09)

PART C - Providing & fixing of service line for “C” Type quarters at GM Complex Colony of Johilla Area.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement: 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. Above 10.00 meter and upto 12.00 metre

Supplying and erection of stay set complete (galvanized) with19/20 mm dia X 1.8 meters long stay rod, anchor plate of size45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20mm X 60 cm ), 7/ 3.15 mm dia G.I. stay wire and strain insulator in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

6 SWG G. I. Wire

Erection of G.I. Wire No. 8 SWG including binding etc. as required.

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.100Amp.

Supply of XLPE Insulated power cable (confirming IS-7098 Part-I ) 1100 Volt grade, 1 core /2 core /3½ core/4 core ISI MARKED with Alu. Stranded /solid conductor ARMOURED 3 Core 35 Sq.mm

Supplying & fixing of aerial bunch cable accessories suspension clamp i/c required attachment for single core cable of approved make on pole with clamp, necessary material as per specification for required Size

Clamp

Providing new LT Service line (all size ) at consumer premises for single phase connection

CMPS @ 7% of 25% of Sr. No. 3.07 to 3.10

Total impact of GST for the purpose of CTC

M/s. SWETA ELECTRICALS

KAMRAN KHAN